700W POWER SUPPLY WITH 125VDC OR 250VDC OUTPUT ENCLOSED CASE, FAN COOLED FHVC319 SERIES * * * * * * * * Compact size: 13.82" x 5.96" x 2.43" Single regulated and adjustable output 700W output power with built-in fan cooling Full electronic protection Telecom quality Field-proven design Also available as plug-in module N+1 redundancy available The FHBC319 Series of AC/DC converters uses an advanced high frequency conversion technology to generate 700W output power at high DC voltage with built-in fan cooling. Output voltages from 100 to 300VDC are available. This low profile design features low component count and high efficiency. The use of high quality components and rigorous quality control results in an MTBF exceeding 100,000 hours at 45oC. SPECIFICATIONS Input Voltage 115/230VAC +/- 15% 47 - 63Hz Output Voltages 125VDC/5.6A or 250VDC/2.8A Consult factory for other voltages Input Protection Thermal Fuse Inrush current limiting Line/Load Regulation + /-1% combined Output Ripple/Noise Better than 1% of output voltage peak to peak or 0.2% RMS of the output voltage (20HZ BW) Output Overvoltage Protection Double regulator loop Input Isolation 2250VDC input to chassis 4300VDC input to output, 8mm spacing 500VDC output to chassis Compliance to IEC950, CSA 22-2950 and UL 1950 Please contact factory for approval status for the requested input/output configuration EMI Meets EN 55022 Class A Overload Protection Current limiting with short circuit protection Self-resetting thermostat for thermal protection Hold Up Time Minimum 10ms at full load for 5% drop of output voltage Operating Temperature 0 to +50Oc Efficiency Min 85% at full load Temperature Drift 0.03% per oC over operating temperature range Dimensions FF4 Package: 13.82" x 5.96" x 2.43" Connections: Screw type terminal block For other connectors please consult factory Warranty Twelve months subject to application within good engineering practice Enhancements to these general specifications and customizing can be accommodated upon request Designed to meet common approval requirements. Specifications subject to change. Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems and DC-input fluorescent lamp inverters since 1982. Custom or standard. Absopulse is a BABT-approved Facility ABSOPULSE ELECTRONICS LTD 110 Walgreen Road Carp, Ontario K0A 1L0 CANADA Tel: (613) 836-3511 Binder Caption: AC/DC Fax: (613) 836-7488 E-mail: absopulse@absopulse.com Visit us at www.absopulse.com 11/05/2002 Made in Canada