Binder Caption: AC/DC 11/05/2002 Made in Canada
700W POWER SUPPLY WITH 125VDC OR 250VDC OUTPUT
ENCLOSED CASE, FAN COOLED
FHVC319 SERIES
• Compact size: 13.82” x 5.96” x 2.43”
• Single regulated and adjustable output
• 700W output power with built-in fan cooling
• Full electronic protection
• Telecom quality
• Field-proven design
• Also available as plug-in module
• N+1 redundancy available
The FHBC319 Series of AC/DC converters uses an advanced high frequency conversion technology to generate 700W
output power at high DC voltage with built-in fan cooling. Output voltages from 100 to 300VDC are available. This low
profile design features low component count and high efficiency. The use of high quality components and rigorous quality
control results in an MTBF exceeding 100,000 hours at 45oC.
SPECIFICATIONS
Input Voltage
115/230VAC +/- 15%
47 - 63Hz
Input Protection
Thermal Fuse
Inrush current limiting
Input Isolation
2250VDC input to chassis
4300VDC input to output,
8mm spacing
500VDC output to chassis
Compliance to IEC950, CSA 22-2-
950 and UL 1950
Please contact factory for approval
status for the requested
input/output configuration
Output Voltages
125VDC/5.6A or 250VDC/2.8A
Consult factory for other voltages
Line/Load Regulation
+/-1% combined
Output Overvoltage Protection
Double regulator loop
Overload Protection
Current limiting with short circuit
protection
Self-resetting thermostat for
thermal protection
Efficiency
Min 85% at full load
EMI
Meets EN 55022 Class A
Output Ripple/Noise
Better than 1% of output voltage
peak to peak or 0.2% RMS of the
output voltage (20HZ BW)
Hold Up Time
Minimum 10ms at full load for 5%
drop of output voltage
Operating Temperature
0 to +50Oc
Temperature Drift
0.03% per oC over operating
temperature range
Dimensions
FF4 Package:
13.82” x 5.96” x 2.43”
Connections:
Screw type terminal block
For other connectors please
consult factory
Warranty
Twelve months subject to
application within good
engineering practice
Enhancements to these general specifications and customizing can be accommodated upon request
Designed to meet common approval requirements. Specifications subject to change.
Designer and manufacturer of quality converters, inverters, UPS systems, complete rack mount systems
and DC-input fluorescent lamp inverters since 1982. Custom or standard.
Absopulse is a BABT-approved Facility
ABSOPULSE ELECTRONICS LTD
110 Walgreen Road
Carp, Ontario K0A 1L0 CANADA
Tel: (613) 836-3511 Fax: (613) 836-7488 E-mail: absopulse@absopulse.com
Visit us at www.absopulse.com
