3
Scotchmate™R eclosable Fasteners
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
Product Description 3M™ Scotchmate™ Reclosable Fasteners offer adv anced closure alternatives to
zippers, scre ws, snaps, hooks, bolts and more. They offer greater design flexibility,
faster product assembly, smoother and cleaner e xterior surfaces and improved
product performance in many applications. The hook and loop f asteners consist of
two strips of n ylon fabric which engage to form a quick fastening attachment.
Simply pull the strips apart by hand to disengage.
The woven hook is covered with about 300 tiny, stiff hooks, per square inch
(46/sq. cm.). The woven loop is covered with thousands of soft, pliable napped
loops, providing for thousands of openings and closings (cycles). The hook and
loop are preshrunk to insure maximum dimensional stability and flatness.
These hook and loop fasteners are coated on the backside with a unique flame resistant
synthetic rubber based pressure sensiti v e adhesi v e formulated to meet the requirements
of the EU Directi ve 2003/44/EC amending the Council Directive 76/769/EEC,
http://europa.eu.int/eur-lex/pri/en/oj/dat/2003/1 042/1 04220030215en00450046.pdf
concerning chemical usage in products and also compliant with EU directi ves
2002/95/EC commonly referred to as RoHS as well as 2003/11/EC, the 24th
ammendment to the 76/769/EEC prohibiting the use of pentabromodiphenylethers and
octabromodiphenylethers in leather goods and te xtiles. Scotchmate reclosable f asteners
also provide flame resistance when tested per FAR 25.853 and other common
flammability tests. These fasteners are easily and conveniently attached to a v ariety
of substrates and functions over a range of temperature and humidity conditions.
Product Construction
Technical Data March, 2005
Note: The follo wing technical information and data should be considered repr esentati v e
or typical only and should not be used for specification purposes.
3M™ Scotchmate 3M™ Scotchmate
Reclosab le F astener Reclosab le F astener
SJ3519FR (Hook) SJ3518FR (Loop)
Material of ConstructionHook or Loop nylon 6 nylon 6,6
Backing nylon 6,6
Adhesive Flame Resistant Synthetic Rubber
Adhesive Color Translucent White
Standard Color s(a) Black, White, Beige
Thickness(b,c) Inches (mm)
maximum unmated 3/32" (2.4 mm) 4/32" (3.2 mm)
Selvedge Edge 3/32" (2.4 mm) ± 1/32" (0.8 mm)
Weight(c) ozs/in2(g/cm2)
0.015 (0.065) 0.015 (0.065)
Liner White 3 mil polyprop ylene film with red
“3M™ Scotchmate™” printing
a) Other colors are available as special orders. The adhesive may produce a yellow tint to some light colored hook and
loop products. Therefore, 3M recommends the user to evaluate the products to see if it meets their color requirements.
See your 3M authorized distributor or 3M representative for color selection guide and minimum requirements .
b) Thickness depends upon the amount of compression load on the pieces .
c) All thickness and weight values are with the liner removed.
3M™ScotchmateTM Reclosable Fasteners
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
Typical System
Performance
Physical Pr operties
and Characteristics
Note: The follo wing technical information is not product release requirements, but rather r epresent
typical performance using standard test methods and is intended for use as a guide to assist in
selection of 3M™ Scotchmate™ Reclosable Fasteners for further evaluation. This technical
information should not be used for setting standards.
Unless stated differently, typical system performance characteristics were measured under controlled
laboratory conditions of 72°F (22°C) and 50% Relative Humidity to obtain maximum r eliability. The user
should evaluate products in the actual application to ensure suitable performance for the intended use.
System P erf ormance(a)
3M™ Scotchmate™ Reclosable
Fastener SJ3518FR loop enga ged to
3M™ Scotchmate™ Reclosable
Fastener SJ3519FR hook
TENSILE (Rigid to Rigid Substrates) PoundsF/sq inch (kNewtons/m2):
Dynamic Tensile Engagement Strength < 1.0 (< 6.9)
Dynamic Tensile Disengagement(b) 11.7 (80.7)
Static Tensile Holding P o w er Holds 1.1#/in2(77.5 grams/cm2) for indicated
time in minutes at the indicated temperature
120°F 4,000
140°F 4,000
158°F 2,000
100°F/100% RH 180
SHEAR (Rigid to Rigid Substrates) PoundsF/sq inch (kNewtons/m2):
Dynamic Shear (1" x 1" overlap)(b) 23.4 (162)
Static Shear Holding Power Holds 1.1#/in2(77.5 grams/cm2) for indicated
time in minutes at the indicated temperature
120°F 7,000
140°F 5,000
158°F 2,000
100°F/100% RH 2,000
PEEL AND CLEAVAGE(b) PoundsF/inch width (gramsF/cm width)
Peak Cleavage Strength (Rigid to Rigid) 5.3 (950)
Peak Peel Strength (“T” Peel, Flexible to Flexible) 2.1 (380)
Peak Peel Strength (90° Peel, Flexible to Rigid) 2.0 (360)
ENGAGED THICKNESS Inches (mm) ± Tolerance
(Nominal without liner)
0.15 (3.9) ± 20%
CLOSURE CYCLE LIFE(c) 5,000
SHELF LIFE(d) 18 months
Note: Long Term Static Load: Conditions such as temperature variations, engagement area, closure pressure
and vibrations or side-to-side movement after engagement or exposure to prolonged periods of moisture or other
environmental factors can affect the closure strength and long term static load performance. Fasteners may slip or
creep in the direction of the static load forces at temperatures or weights greater than indicated. The user is
responsible for designing the amount of fastening area based upon the specific conditions for the application. Four
square inches of fastening area per pound of static load is suggested as a starting point for such evaluations .
a) System performance tests are determined by measuring the performance of the entire mated reclosable fastener system (two
non-anodized aluminum plates joined together with the indicated fasteners). The “T” peel, only has the closure performance
measured per ASTM D5170 and was not adhered to aluminum panels. The 90° peel has one of the mated fasteners attached
to a non-anodized aluminum plate while the other mated fastener is disengaged at a 90° angle.
b) 3M™ Scotchmate™ Reclosable Fasteners SJ3518FR and SJ3519FR are engaged with firm pressure and disengaged, peeled
or cleaved at the rate of 12 inches (305 mm) per minute.
c) Cycle Life is the number of cycles (openings and closings) the fastener can provide while maintaining 50% or greater of the
original peel values.
d) Shelf life is from date of manufacture when stored in original packaging between 60° to 80°F (16° to 27°C) and 40 to 60%
relative humidity.
- 2 -
Additional
Performance
Characteristics
Solvent Resistance: The nylon components resist incidental attack by most common
solvents and alkaline solutions. Acid solutions may cause deterioration of the fastener.
The adhesive on 3M™ Scotchmate™ Reclosable Fasteners SJ3518FR and SJ3519FR
may be affected by many common organic laboratory solvents and transportation fluids
(gasoline, motor oil, etc.). If increased solvent resistance is desired and flammability is
not critical, our nylon 3M™ Scotchmate™ Reclosable Fasteners SJ3571, SJ3572 and
SJ3595 or our polyester 3M™ Scotchmate™ Reclosable Fasteners SJ3576 or SJ3577
could be evaluated. If greater resistance of the fastener to acid solutions is desired, our
polyester 3M™ Scotchmate™ Reclosable Fasteners SJ3586FR and SJ3587FR could be
evaluated.
Plasticizer Resistance: The adhesive on Scotchmate reclosable fasteners SJ3518FR and
SJ3519FR may be affected by plasticizers found in many common flexible vinyl or other
material that may result in softening or adhesion loss over time. These products are not
recommended for adhering to plasticized materials. If plasticizer resistance is desired and
flammability resistance is not required, nylon 3M™ Scotchmate™ Reclosable Fasteners
SJ3522 and SJ3523 could be e valuated.
3M™ScotchmateTM Reclosable Fasteners
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
- 3 -
Typical Physical
Properties and
Characteristics
Note: The follo wing technical information is not product release requirements, but rather r epresent
typical performance using standard test methods and is intended for use as a guide to assist in
selection of 3M™ Scotchmate™ Reclosable Fasteners for further evaluation. This technical
information should not be used for setting standards.
Unless stated differently, typical system performance characteristics were measured under controlled
laboratory conditions of 72°F (22°C) and 50% Relative Humidity to obtain maximum r eliability. The user
should evaluate products in the actual application to ensure suitable performance for the intended use.
Flammability Tests 3M™ Scotchmate™ 3M™ Scotchmate™
Reclosab le F astener Reclosab le F astener
SJ3518FR (loop) SJ3519FR (hook)
FAR 25.853 P ara. (a)(1)(i) 60 Second Vertical
Test Spec. (max., average)
of three
Burn Length (inches) 6 4 3.8
Extinguish TIme(a) (seconds) 15 SE SE
Drip Ext. Time (seconds) 3 1.7 1.3
FAR 25.853 P ara. (a)(1)(ii) 12 Second Vertical
Test Spec. (max., average)
of three
Burn Length (inches) 8 2.2 1.8
Extinguish TIme(a) (seconds) 15 2.5 2
Drip Ext. Time (seconds) 3 1 2
FAR 25.853 P ara. (a)(1)(iv) 15 Second Horizontal (2.5"/min ute)
Test Spec. (max.)
Average Burn Rate(b) 2.5"/minute EBRTZ EBRTZ
FAR 25.853 P ara. (a)(1)(v) 15 Second Horizontal (4.0"/min ute)
Test Spec. (max.)
Average Burn Rate 4"/minute EBR TZ EBR TZ
a) Extinguish time refers to the time it takes the burning matter to extinguish after the flame source is removed. SE means the
flame extinguished before removal of the flame.
b) EBRTZ means the product extinguished before the flame reached the time zone.
3M™ScotchmateTM Reclosable Fasteners
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
- 4 -
Additional
Performance
Characteristics
(continued)
Flammability Resistance: 3M™ Scotchmate™ Reclosable Fasteners SJ3518FR and
SJ3519FR have not been tested to other standard flammability tests such as FMVSS-302,
ASTM E-162, ASTM E-662, BSS-7239, UL94 and others.
Environmental Effects: Temperatures do wn to -20°F (-29°C) increases the typical
closure strengths. If products will be exposed to outdoor weathering or ultra violet exposure
then black is suggested or our polyester 3M™ Scotchmate™ Reclosable Fasteners
SJ3586FR or SJ3587FR can be e valuated.
Water (Humidity) Resistance: Closure strength of nylon hook and loop f asteners may
decrease after prolonged exposure to moisture due to w ater absorption by the cut n ylon
ends for hook products. Closure strength is regained when dried. Impro ved water resistance
of the closure can be obtained by using polyester hook and loop (Scotchmate reclosable
fasteners SJ3586FR or SJ3587FR). Once bonded the adhesive has high resistance to
moisture under typical use conditions.
Volatile Outgassing: Volatile outgassing, as per ASTM E595, is one important test
in determining the suitability of materials for spacecraft. Generally products with acrylic
or no adhesive have lower volatile outgassing values. Scotchmate reclosable fasteners
SJ3518FR and SJ3519FR have not been tested for outgassing and would not be expected
to pass ASTM E595. Products tested at the Goddard Space Flight Center can be found at
the following web site: http://outgassing.nasa.gov/. If flame resistance is not critical, then
our nylon 3M™ Scotchmate™ Reclosable Fasteners SJ3571, SJ3572 and SJ3595 or our
polyester 3M™ Scotchmate™ Reclosable Fasteners SJ3576 or SJ3577 could be ev aluated.
Sterilization/Autoclaving: Scotchmate reclosable fasteners SJ3518FR and SJ3519FR
have not been exposed to gas or steam sterilization, or autoclaving. Plain back products
such as nylon 3M™ Scotchmate™ Reclosable Fasteners SJ3418FR, SJ3419FR or
polyester 3M™ Scotchmate™ Reclosable Fasteners SJ3486FR or SJ3487FR have not
been exposed to sterilization or autoclaving, but would be expected to perform better than
adhesively coated products.
Washing and Dry Cleaning: Scotchmate reclosable fasteners SJ3518FR and SJ3519FR,
attached to fabrics will typically shrink less than 5% unless the fabric has greater shrinkage
amounts. Washing or dry cleaning of these products is not recommended due to adhesiv e
softening that could transfer trace adhesi v e residues to other materials.
Fungus Resistance: Scotchmate reclosable fasteners SJ3518FR and SJ3519FR ha ve not
been tested for fungus resistance per ASTM G-21 nor MIL STD 810F Method 508.5 and
should be e valuated by the customer under conditions applicable to the expected end use.
Static Discharge: Scotchmate reclosable fasteners SJ3518FR and SJ3519FR have not been
tested for static charge released during liner remo val, closure opening, or adhesiv e remo val
from the substrate once a fastener has been applied. If your application requires use of these
fasteners in areas where static dischar ge is of a concern, the f asteners should be tested under
expected use conditions.
3M™ScotchmateTM Reclosable Fasteners
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
- 5 -
Attachment
Techniques The following information is intended to assist the designer considering the use of
adhesi vely coated 3M™ Scotchmate™ Reclosable Fasteners. Product performance
depends upon a number of factors, including the fastener selected, the conditions in which
the fastener is applied and the time and environmental conditions in which it is expected to
perform. Because many of these f actors are uniquely within the user’s knowledge and
control, it is required that the user e valuate 3M products to determine whether it is fit for a
particular purpose and suitable for the user’s substrates, method of application and desired
end use.
The three most important techniques for attaching Scotchmate reclosable fasteners
SJ3518FR and SJ3519FR to various substrates are summarized below. For complete
details on techniques and options for attaching Scotchmate reclosable fasteners please see
the technical bulletin “Attachment of 3M™ Scotchmate™ and Dual Lock™ Reclosable
Fasteners” (70-0709-3929-6).
Design Considerations: As a general rule, four square inches of fastener area per pound of
static load to be supported is suggested as a starting point for e valuation. More or less area
may be needed depending on specific conditions or end use applications.
Rounding the corners, recessing the product into the substrate and providing raised edges
around the reclosable fastener can reduce the possibility of edge lifting, and impro v e the
ov erall appearance of the f astener on the finished product. Mechanically securing the
corners of the reclosable fastener can also reduce the possibility of edge lifting, b ut may
reduce the closure performance.
Available Sizes(a) 3M™ Scotchmate™ Reclosab le Fasteners
SJ3518FR (Loop) and SJ3519FR (Hook)
Roll W eight
(with side shields
Width(a) and grommets)
inch ± 1/16 Roll Length Pounds Selvedge Extended
(mm) ± 1.6 Yards (Meters) (Kilograms) Edge(b) Liner(b)
5/8" (15.9 mm) 50 yds. (45.7 meters) 1.6 (0.73) One Edge One Edge
3/4" (19 mm) 50 yds. (45.7 meters) 1.9 (0.86) One Edge One Edge
1" (25.4 mm) 50 yds. (45.7 meters) 2.4 (1.1) One Edge One Edge
1-1/2" (38.1 mm) 50 yds. (45.7 meters) 3.4 (1.5) Two Edges Two Edges
2" (50.8 mm) 50 yds. (45.7 meters) 4.4 (2.0) Two Edges Two Edges
Fabricated Forms(c) Cut Pieces
a) Scotchmate reclosable fasteners SJ3518FR or SJ3519FR products are available on standard 3" diameter cores. Scotchmate
reclosable fasteners SJ3518FR and SJ3519FR are available up to 4" wide as a special order. An additional 1/4" should be
added to the product width to account for the side shields supplied with the product. The diameter of the side shield is 17.5
inches. Contact your 3M authorized distributor or 3M representative for details on supplying special sizes.
b) Other configurations may be possible as a special order.
c) 1" x 3" of pre-mated Scotchmate reclosable fasteners SJ3518FR and SJ3519FR cut pieces are available in beige with
selvedge edge and extended liner on one side. 3M™ Scotchmate™ Reclosable Fasteners can be fabricated in many custom
shapes and sizes to fit your product design and manufacturing process. Contact your local 3M authorized converter or 3M
representative for additional options, configurations and ordering information.
3M™ScotchmateTM Reclosable Fasteners
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
- 6 -
Attachment
Techniques
(continued)
1) Pressure Sensiti v e Adhesi ve attachment: The use of pressure sensitive adhesives
eliminates or reduces the need for se wing, solv ent activation, dielectric or ultrasonic
bonding and bulk adhesive bonding. This can result in simplicity, greater safety and lo wer
installation costs. Pressure sensiti v e products can be applied manually or automatically
using a v ariety of equipment choices. Contact your 3M Sales Representative to discuss
automated equipment options.
Substrate Surface Preparation: Highly te xtured substrate surf aces may reduce the
ultimate adhesion le v els and care should be given to minimize the surface texture or
roughness. Adhesi v e back ed 3M™ Reclosable Fasteners such as 3M™ Scotchmate™
products should be applied to surfaces that are clean, dry, and free of oil, grease, dust, mold
release agents or other contaminants that could reduce the adhesion. It is recommended to
remov e any surface contaminants that may reduce adhesion by using a method suited for
the type and quantity of surface contaminants present.
Note: When using cleaning agents such as solv ents or abrasives, it is important to follow all
manufacturer’s precautions and directions for use as well as gov ernment regulations
or customer requirements.
In exceptional cases, especially when remo ving silicone mold release agents or on rough or
porous surfaces, it may be necessary to sand or abrade the surface, use an adhesive primer,
or surface sealer to optimize bond performance. The selection of priming or sealing
materials will depend on both the substrates and the environmental conditions the product
will be exposed to during use.
Attachment Procedure: To obtain an optimum bond to any surface, both the fasteners and
the target surf ace should have equilibrated at temperatures between 70°F (21°C) and 100°F
(38°C) for a minimum of 1 hour before application. Remov e the adhesive liner and without
touching the adhesi v e apply the adhesive side of the fastener to the pre-cleaned and
prepared surface. Using f inger pressure, press the f astener onto the substrate to obtain initial
surface contact between the adhesive and substrate. If the substrate is fle xible, mak e sure it
is laying on a hard flat surface so as to permit uniform application of the adhesive. Use of a
rubber hand roller, press platen or similar de vice is recommended to ensure full contact of
adhesi v e with the substrate. Three passes in each direction, with special attention paid to
rolling do wn the edges, should be adequate.
Dwell Time before Handling or Applying a Load: Parts with properly chosen and
applied reclosable fasteners with pressure sensitive adhesives can be handled immediately.
Adhesi ve bond strength increases after application with time, pressure and/or temperature,
as the adhesi ve further wets out the substrate surface. Once attached to the substrate, a
1-hour minimum dwell time is recommended before applying a load or disengaging.
This dwell time is important for achie ving a firm adhesi ve bond before applying a load
or using. This adhesi ve achieves approximately 50% of the ultimate bond strength within
20 minutes, 90% after 1 hour and the ulitmate bond strength is obtained within 24 hours
at 72°F (22°C) and 50% relati ve humidity. The use of primers or adhesion promoters may
reduce the time required to achie ve the ultimate bond strength.
3M™ScotchmateTM Reclosable Fasteners
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
- 7 -
A pplication Ideas Scotchmate reclosable fasteners SJ3518FR and SJ3519FR can provide a firm adhesiv e
bond to a wide v ariety of surfaces, including, but not limited to those listed below.
Because product performance will depend on actual conditions within any specific
application, it is essential that the user e valuate the 3M product to determine whether it is
fit for a particular material purpose and suitable for the user’s method of application.
Plastics
Paper Cardboard Acrylic Polypropylene
Glass Sealed Wood Polycarbonate Polystyrene
Fabrics Bare and Painted Metal Polyethylene Rigid Vinyl
Not recommended for attaching to flexible vin yl or plasticized plastics.
Scotchmate reclosable fasteners SJ3518FR and SJ3519FR has shown to be useful for:
Anti-scratch surface Vibration and sound dampening control
Panels in Rail Vehicles Airline Interiors and Seating
Insulation Blanket Closures Electronic Cover Plates
Attachment
Techniques
(continued)
2) Heat (Press) Bonding: 3M™ Scotchmate™ Reclosable Fasteners SJ3518FR (hook) and
SJ3519FR (loop) can be attached to many f abric and foam articles by press bonding. The
fastener is initially adhered to the article using f inger pressure. Bond strength is increased
by applying heat and pressure through the substrate to the adhesi v e side of the f astener for
gi v en pressure, times and heating period. For properly chosen press bonding conditions the
product can be used immediately after cooling, usually a matter of minutes. Once applied
these fasteners should not be washed or dry cleaned. Product performance will depend
upon the nature of the fabric or foam and other conditions within an y specific application.
For this reason it is essential that the user ev aluate the product to determine if it is fit for a
particular purpose and suitable for the user’s method of application.
Typical Press Bonding Conditions:
Bonding Temperature: 250 to 425°F (121 to 218°C)
Bonding Pressure: 30 to 100 psi (207 to 690 kPa)
Bonding Time: 3 to 30 seconds.
3) Mechanical Attachment: Scotchmate reclosable fasteners SJ3518FR and SJ3519FR
may also be mechanically attached to difficult to adhere to surfaces such as textured
plastics and wood by using staples, screws or rivets. The head of the mechanical fastener
should be flat and large enough to resist pull through when the fastener is disengaged.
The head of the fastener should also be recessed as much as possible below the surface of
the hook or loop to prevent interference with (dis)engagement properties.
The use of resin coated chisel divergent staples appear to provide excellent attachment to
thick sections of soft and hardwood surfaces.
3M™ScotchmateTM Reclosable Fasteners
SJ3519FR and SJ3518FR
Nylon Flame Resistant Hook and Loop
- 8 -
MSDS: 3M has not prepared a MSDS for these products which are not subject to the MSDS requirements
of the Occupational Safety and Health Administration’ s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for
use, these products should not present a health and safety hazard. However, use or processing of the
products in a manner not in accordance with the directions for use may affect their perf ormance and
present potential health and safety hazards.
TSCA: These products are defined as an article under the Toxic Substances Control Act and therefore,
are exempt from inventory listing requirements.
Military Spec. MIL-F-21840G: 3M™ Scotchmate™ Reclosable Fasteners SJ3518FR and SJ3519FR
meet the physical requirements of Mil spec. MIL-F-21840G, Type III Class 3. Note that Class 5
requirements are met by mating Scotchmate reclosabele fastener SJ3518FR to 3M™ Scotchmate™
Reclosable Fastener SJ3586FR.
C.I.D. A-A-55126A: CID A-A-55126A supersedes mil spec. MIL-F-21840G. Scotchmate reclosable
fasteners SJ3518FR and SJ3519FR have not been tested to the requirements of this CID as the CID has
lower performance and contains errors and omissions.
Certification/
Recognition
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Product Use
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicab le specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED T O, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUST OM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defectiv e within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Warranty and
Limited Remedy
Printed in U.S .A.
©3M 2005 70-0709-3976-7 (3/05)
Recycled Paper
40% pr e-consumer
10% post-consumer
3
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (fax)
www.3M.com/industrial
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system
registered to ISO 9001:2000 and ISO/TS 16949:2002 standards.
ISO 9001:2000 - ISO/TS 16949:2002
