Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Plastic Film Capacitors
123456 7 8 9 11 12
E Z P E
Product code Dielectric &
construction
SuffixRated voltage Capacitance SuffixPin type
10
TA
L 2-pin type
M 4-pin type
50 500 V.DC
80 800 V.DC
1B 1100 V.DC
1D 1300 V.DC
●High safety, Self-healing and Self-protecting function built-in
●Long product life, High reliability
●Low loss, Low ESR
●Flame retardant (Case and sealing resin)
●RoHS directive compliant
For DC fi ltering, DC link circuit
●Solar inverters
●Wind power generation
●Industrial power supplies
●Inverter circuit in appliances (Air Conditioners etc.)
●Dielectric : Polypropylene fi lm
●Electrodes : Metallized dielectric with segmented pattern
●Plastic case : UL94 V-0
●Sealing : UL94 V-0
●Terminals : Tinned wires, 2-pin and 4-pin versions
Construction
Metallized Polypropylene
Film Capacitor
Series : EZPE Series
Speci cations
Category temperature range (TC) ✽1−40 °C to +85 °C
Rated voltage(VR) ✽2500 V.DC, 800 V.DC, 1100 V.DC, 1300 V.DC
(Derating of rated voltage by more than 70 °C ✽3)
Rated capacitance (CR)
500 V.DC 10 F to 110 F
800 V.DC 10 F to 60 F
1100 V.DC 10 F to 40 F
1300 V.DC 10 F to 25 F
Capacitance tolerance ±10 %
Withstanding DC voltage Between terminals : Rated voltage. (V.DC)×150 %, 10 s
Terminal to case : 2110 V.AC (50 Hz or 60 Hz), 10 s
Insulation resistance (CR) CR > 10000 Ω  F (20 °C, 500 V.DC, 60 s)
✽1 : The temperature of capacitor surface (case)
✽2 : Use for DC voltage only
✽3 : Refer to the page of “DC voltage derating”
Features
Recommended applications
Explanation of part number
Feb. 201601
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Plastic Film Capacitors
Marking
P1±1
L±0.5
P2±1
0±0.2
4.0±2.0
H±0.5
W±0.5
Marking
P1±1
4.0±2.0
H±0.5
0±0.2
L±0.5
W±0.5
DC V μF
(a) (a) Rated voltage
(b) Capacitance
(c) Lot No.
(c)
(b)
Panasonic
Marking (ex.)
Unit : mm
● Rated voltage : 500 V.DC at 70 °C (450 V.DC at 85 °C)
✽1 : When rising temperature of capacitor surface by continuous peak current (included pulse current),
use within limit specified for temperature of capacitor surface and self heating temperature rise.
✽2 : Maximum RMS current @70 °C, 10 kHz
Use within limit for self heating temperature rise at capacitor surface.
✽3 : Typical values @ 20 °C, 10 kHz ESR : less than 2.5×ESR typ
✽4 : Maximum dissipation factor @ 20 °C, 1 kHz
✽5 : Minimum order quantity consists of 4 packing units.
Part No.
Cap.
CR
(µF)
Dimensions (mm)
dv/dt
[V/s]
Permissible
current
ESR typ
✽3
(mΩ)
tan d ✽4
(%)
Mass
(g)
Min.
order
Q'ty ✽5
(pcs)
WH
LP1P2f
Peak
Current
✽1
(Ao-p)
RMS
Current
✽2
(Arms)
EZPE50106LTA 10 20 42 41.5 37.5 – 1.2 21 210 5.0 22.0 0.28 45
600
EZPE50156LTA 15 20 42 41.5 37.5 – 1.2 21 315 7.5 14.8 0.28 45
EZPE50206LTA 20 20 42 41.5 37.5 – 1.2 21 420 9.5 11.0 0.28 44
EZPE50256LTA 25 20 42 41.5 37.5 – 1.2 21 525 11.0 8.8 0.28 43
EZPE50306MTA 30 20 42 41.5 37.5 10.2 1.2 21 630 12.5 7.0 0.28 43
EZPE50356MTA 35 30 51 41.5 37.5 10.2 1.2 21 735 13.5 6.2 0.28 83
400
EZPE50406MTA 40 30 51 41.5 37.5 10.2 1.2 21 840 14.5 5.4 0.28 82
EZPE50456MTA 45 30 51 41.5 37.5 10.2 1.2 21 945 15.2 4.9 0.28 81
EZPE50506MTA 50 30 51 41.5 37.5 20.3 1.2 21 1050 16.0 4.4 0.28 80
EZPE50556MTA 55 30 51 41.5 37.5 20.3 1.2 21 1155 16.3 4.1 0.28 79
EZPE50606MTA 60 30 51 41.5 37.5 20.3 1.2 21 1260 16.5 3.9 0.28 77
EZPE50656MTA 65 30 51 57.5 52.5 10.2 1.2 14 910 15.0 6.8 0.44 111
200
EZPE50706MTA 70 30 51 57.5 52.5 10.2 1.2 14 980 15.5 6.5 0.44 109
EZPE50756MTA 75 30 51 57.5 52.5 20.3 1.2 14 1050 16.0 6.0 0.44 108
EZPE50806MTA 80 30 51 57.5 52.5 20.3 1.2 14 1120 16.5 5.7 0.44 106
EZPE50856MTA 85 35 56 57.5 52.5 20.3 1.2 14 1190 16.7 5.4 0.44 142
EZPE50906MTA 90 35 56 57.5 52.5 20.3 1.2 14 1260 17.0 5.1 0.44 141
EZPE50956MTA 95 35 56 57.5 52.5 20.3 1.2 14 1330 17.5 4.9 0.44 140
EZPE50107MTA 100 35 56 57.5 52.5 20.3 1.2 14 1400 18.0 4.7 0.44 139
EZPE50117MTA 110 35 56 57.5 52.5 20.3 1.2 14 1540 18.5 4.4 0.44 138
Dimensions
Rating · Dimensions · Quantity
Feb. 201601
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Plastic Film Capacitors
● Rated voltage : 800 V.DC at 70 °C (700 V.DC at 85 °C)
● Rated voltage : 1100 V.DC at 70 °C (920 V.DC at 85 °C)
● Rated voltage : 1300 V.DC at 70 °C (1100 V.DC at 85 °C)
✽1 : When rising temperature of capacitor surface by continuous peak current (included pulse current),
use within limit specified for temperature of capacitor surface and self heating temperature rise.
✽2 : Maximum RMS current @70 °C, 10 kHz
Use within limit for self heating temperature rise at capacitor surface.
✽3 : Typical values @ 20 °C, 10 kHz ESR : less than 2.5×ESR typ
✽4 : Maximum dissipation factor @ 20 °C, 1 kHz
✽5 : Minimum order quantity consists of 4 packing units.
Part No.
Cap.
CR
(µF)
Dimensions (mm)
dv/dt
[V/s]
Permissible
current
ESR typ
✽3
(mΩ)
tan d ✽4
(%)
Mass
(g)
Min.
order
Q'ty ✽5
(pcs)
WH
LP1P2f
Peak
Current
✽1
(Ao-p)
RMS
Current
✽2
(Arms)
EZPE80106LTA 10 20 42 41.5 37.5 – 1.2 22 220 7 15.8 0.22 44 600
EZPE80156MTA 15 20 42 41.5 37.5 10.2 1.2 22 330 9 10.5 0.22 43
EZPE80206MTA 20 30 51 41.5 37.5 10.2 1.2 22 440 11 7.7 0.22 82
400EZPE80256MTA 25 30 51 41.5 37.5 10.2 1.2 22 550 13 6.8 0.22 80
EZPE80306MTA 30 30 51 41.5 37.5 20.3 1.2 22 660 15 5.3 0.22 78
EZPE80356MTA 35 30 51 57.5 52.5 10.2 1.2 15 525 12 9.7 0.33 110
200
EZPE80406MTA 40 30 51 57.5 52.5 20.3 1.2 15 600 13 8.3 0.33 107
EZPE80456MTA 45 30 51 57.5 52.5 20.3 1.2 15 675 14 7.0 0.33 104
EZPE80506MTA 50 35 56 57.5 52.5 20.3 1.2 15 750 15 6.3 0.33 140
EZPE80556MTA 55 35 56 57.5 52.5 20.3 1.2 15 825 16 5.9 0.33 138
EZPE80606MTA 60 35 56 57.5 52.5 20.3 1.2 15 900 17 5.6 0.33 136
Part No.
Cap.
CR
(µF)
Dimensions (mm)
dv/dt
[V/s]
Permissible
current
ESR typ
✽3
(mΩ)
tan d ✽4
(%)
Mass
(g)
Min.
order
Q'ty ✽5
(pcs)
WH
LP1P2f
Peak
Current
✽1
(Ao-p)
RMS
Current
✽2
(Arms)
EZPE1B106MTA 10 20 42 41.5 37.5 10.2 1.2 54 540 7.0 12.3 0.20 43 600
EZPE1B156MTA 15 30 51 41.5 37.5 10.2 1.2 54 810 8.5 8.2 0.20 80
EZPE1B206MTA 20 30 51 41.5 37.5 20.3 1.2 54 1080 10.0 6.3 0.20 76
400EZPE1B256MTA 25 30 51 57.5 52.5 10.2 1.2 35 875 8.0 10.7 0.28 107
EZPE1B306MTA 30 30 51 57.5 52.5 20.3 1.2 35 1050 9.0 8.5 0.28 103
EZPE1B356MTA 35 35 56 57.5 52.5 20.3 1.2 35 1225 10.0 7.2 0.28 137 200
EZPE1B406MTA 40 35 56 57.5 52.5 20.3 1.2 35 1400 11.0 6.5 0.28 134
Part No.
Cap.
CR
(µF)
Dimensions (mm)
dv/dt
[V/s]
Permissible
current
ESR typ
✽3
(mΩ)
tan d ✽4
(%)
Mass
(g)
Min.
order
Q'ty ✽5
(pcs)
WH
LP1P2f
Peak
Current
✽1
(Ao-p)
RMS
Current
✽2
(Arms)
EZPE1D106MTA 10 30 51 41.5 37.5 10.2 1.2 73 730 12.0 10.0 0.17 80 400
EZPE1D156MTA 15 30 51 57.5 52.5 10.2 1.2 50 750 10.0 14.5 0.22 109
200EZPE1D206MTA 20 30 51 57.5 52.5 20.3 1.2 50 1000 14.0 11.1 0.22 103
EZPE1D256MTA 25 35 56 57.5 52.5 20.3 1.2 50 1250 17.0 8.5 0.22 136
Rating · Dimensions · Quantity
Feb. 201601
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>