INTERNATIONAL+ LINEARS INTERNATIONAL+ LINEARS FEATURES * World-wide AC input ranges and safety standards * Industry standard packages * UL/CSA TUV/IEC approved--68 models to UL1950; CSA C22.2 No. 234 L3; TUV certified to IEC950 * Burn-in with cycling; 3-year warranty * Capacitors have highest CV & ripple current ratings * * * * * MTBF 200,000+ hours per Mil Handbk 217D (most units) All electrolytic caps rated at 105C Transformer insulation meets Class F (155C) Exceed FCC and CISPR22 Class B conducted emissions marked to LVD SPECIFICATIONS AC Input 100, 120 and 240Vac: +10%, -13%; 215Vac: +12%, -11 %; 47 to 63Hz. Tolerance for 230Vac operation is +15%, -10%. Derate output current 10% for 50Hz operation. DC Output See voltage rating chart. Adjustment range 5% minimum except HA series. Line Regulation 0.05% for a 10% change. Load Regulation 0.05% for a 50% load change. Output Ripple 3mV +0.05% of output voltage, peak to peak maximum. All "3-terminal regulator" outputs: 3mV +0.2% peak to peak maximum. Transient Response <50 microseconds for 50% load change. Built-in on all 5V models, set at 6.2V 0.4V. Other models use optional overvoltage protection. Remote Sensing Provided on all models; open sense lead protection built-in (except HA series). Stability 0.05% for 24 hours after warmup. Temperature Rating 0 to 50C full rated, derated linearly to 40% at 70C. Temperature Coefficient 0.01%/C maximum. Efficiency 5V units: 45%; 12 and 15V units: 55%; 20 and 24V units: 60%. Logic Inhibit and Current-Share F & G models. Short Circuit Protection Automatic current limit/foldback. Overvoltage Protection Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 54 Model (Dual) Output 1 Output 2 B HAA5-1.5/OV-A+ 5V@1.5A 5V@1.5A AA B HBB5-3/OV-A+ 5V@3A 5V@3A BB 6A C HCC5-6/OV-A+ 5V@6A 5V@6A CC 9A N HAA512-A+ 5V@2A 9-15V@0.5A AA 12A D HBB512-A+ 5V@3A 9-15V@1.2A BB CC Voltage Current Case HA2-1.5-A+ 2V 1.5A HB2-3-A+ 2V 3A HC2-6-A+ 2V HN2-9-A+ 2V HD2-12-A+ 2V Case HE2-18-A+* 2v 18A E HCC512-A+** 5V@6A 9-15V@2.5A HA5-1.5/OV-A+ 5V 1.5A B HAA524-A+** 5V@2A 18-24V@0.3A AA HB5-3/OV-A+ 5V 3A B HBB524-A+ 5V@3A 18-24V@0.8A BB HC5-6/OV-A+ 5V 6A C HCC524-A+ 5V@6A 18-24V@2A CC HN5-9/OV-A+ 5V 9A N HAD12-0.4-A+ +12V@0.4A -12V@0.4A B HD5-12/OV-A+ 5V 12A D HAD15-0.4-A+ +15V@0.4A -15V@0.4A B HE-18/OV-A+* 5V 18A E HAA15-0.8-A+ +12 to 15V@1A/0.8A -12 to -15V@1A/0.8A AA +12 to 15V@1.7A/1.5A -12 to -15V@1.7A/1.5A BB +12 to 15V@3.4A/3A -12 to -15V@3.4A/3A CC F5-25/OV-A+* 5V 25A F HBB15-1.5-A+ G5-35/OV-A+* 5V 35A G HCC15-3-A+ CP197-A+* 5V 50A G HDD15-5-A+* +12 to 15V@5A -12 to -15V@5A E HA15-0.9-A+ 12V 0.9A B HAA24-0.6-A+ +18 to 24V@0.4A/0.6A -18 to -24V@1A/0.8A AA HB12-1.7-A+ 12V 1.7A B HC12-3.4-A+ 12V 3.4A C HN12-5.1-A+ 12V 5.1A N HD12-6.8-A+ 12V 6.8A D HE12-10-2-A+* 12V 10.2A E F15-15-A+* (12V) 12V 16A F HA15-0.9-A+ 15V 0.9A B **May require fan cooling. Output 1 Output 2 Output 3 HTAA-16W-A+ Model (Triple) 5V@2A +12 to 15V@0.4/0.4A -12 to 15V@0.4/0.4A*** Case AA HBAA40W-A+ 5V@3A +12 to 15V@1/0.8A -12 to 15V@1/0.8A*** BAA HCBB105W-A+** 5V@3A +12 to 15V@3.4/3.0A -12 to 15V@3.4/3A*** CBB HCAA60W-A+ 5V@6A +12 to 15V@1/0.8A -12 to 15V@1/0.8A*** D 5V@6A +12 to 15V@1.7/1.5A -12 to 15V@1.7/1.1A*** CBB NBB HB12-1.7-A+ 15V 1.5A B HC15-3-A+ 15V 3 C HCBB75-W-A+ HN15-4.5-A+ 15V 4.5A N CP131-A+ 5V@9A +12 to 15V@1.7/1.5A -12 to 15V@1.7/1.1A*** HD15-6-A+ 15V 6 D HDBB105W-A+* 5V@12A +12 to 15V@1.7/1.5A -12 to 15V@1.7/1.1A*** DBB HE15-9-A+* 15V 9 E HDCC150W-A+* 5V@12A +12 to 15V@3.4/3A -12 to 15V@3.4/3A*** DCC F15-15-A+* 15V 15A F HA24-0.5-A+ 24V 0.5A B HB24-1.2-A+ 24V 1.2A B HC24-2.4-A+ 24V 2.4A C HN24-3.6-A+ 24V 3.6A N ND24-4.8-A+ 24V 4.8A D HE24-7.2-A+* 24V 7.2A E F24-12-A+* 24V 12A F HA24-0.5-A+ (28V) 28V 0.5A B HB28-1.0-A+ 28V 1A B INTERNATIONAL+ LINEARS Model (Single) *Requires fan cooling. **May require fan cooling. ***No. 3 output usable at -5V, rate at 1/2 of 15V current rating. DISK DRIVE/PRINTER SERIES Model Output 1 Output 2 Output 3 Case CP206-A+ 24V, 3A (3.5PK) 5V, 3A 5V, 1A CBB CP323-A+ 5V @ 2A 12V @ 4A N/A BB Output 1 Output 2 Output 3 Case HC28-2.0-A+ 28V 2A C HN28-3-A+ 28V 3A N HD28-4-A+ 28V 4A D HE28-6-A+* 28V 6A E CP379-A+ +5V@6A +24V@3.5/6A PK -5 or -12V@1.2A NBB F24-12-A+* (28V) 28V 10A F CP498-A+ +5V@6A +24V@5/10A PK -12V@0.5A NBB HB48-0.5-A+ 48V 0.5A B HC48-1-A+ 48V 1A C HD48-3-A+** 48V 3A D HE48-4-A+* 48V 4A E F48-6-A+* 48V 6A F FIXED DISK SERIES Model *Requires fan cooling. **May require fan cooling. Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 55 INTERNATIONAL+ LINEARS INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS: 3.00 [76.20mm] 0.450 [11.43mm] MAX. 4.00 [101.60mm] +OUT 3.100 [78.74mm] S+ -OUT DC OUTPUT 3.75 0.25 [6.35mm] DC OUTPUT INTERNATIONAL+ LINEARS 0.25 [6.35mm] +OUT 4.125 [104.78mm] -OUT S- [95.25mm] OVP-12 OPTIONAL 4.88 [123.95mm] AC INPUT 4 2 3 1 2.500 [63.50mm] 0.500 MAX. [12.70mm] 0.450 [10.16mm] MAX. 0.25 [6.35mm] 0.35 [8.89mm] AC INPUT 4 2 3 1 [4.78mm] 0.188 DIA. MTG. HOLES 8PL 0.75 [19.05mm] 1.25 [31.75mm] 3.375 [85.72mm] 0.25 [6.35mm] 1.80 [45.72mm] MAX. 0.188 [4.78mm] DIA. MTG. HOLES 6PL 1.63 [41.40mm] [19.05mm] 0.75 B CASE (WT. 2LBS.) A CASE (WT. 1LB.) [4.78mm] 0.188 DIA. MTG. HOLES 12PL 0.25 [6.35mm] 0.450 [11.43mm] MAX. 0.188 DIA. [4.78mm] MTG. HOLES 16PL DC OUTPUT OVP-12 (OPTIONAL) +OUT 0.25 0.625 [6.35mm] [15.88mm] MAX. S+ DC OUTPUT S- 5.63 [143.00mm] -S -OUT OVP-12 OPTIONAL -OUT 4.875 [123.83mm] 1 3 2 4 4.88 +OUT 4.125 AC INPUT [104.78mm] [123.95mm] 1.125x.550 [28.58x13.97mm] RECTANGLE AC INPUT 4 2 3 1 4.125 [104.78mm] 1.250 [31.75mm] 0.75 [19.05mm] 2.50 [63.50mm] MAX. [31.75mm] 8.000 [203.20mm] 0.50 [12.70mm] 1.250 [31.75mm] 2.75 [69.85mm] 0.75 [19.05mm] 1.250 [31.75mm] 0.75 [19.05mm] 9.00 [228.60mm] 4.88 [123.95mm] C CASE (WT. 4LBS.) D & CP510 CASE (WT. 7.5LBS.) Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 56 .625 SQ. [15.88mm] 1.250 0.30 [7.62mm] 0.25 [6.35mm] 0.625 DIA. [15.87mm] 2PL +S 0.75 [19.05mm] INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS: 1.58 [40.13mm] OVP 24 OPTIONAL 0.725 [18.42mm] 0.25 [6.35mm] 1.125x0.550 REC [28.58x13.97mm] DC OUTPUT -S -OUT +S +OUT 0.625 SQ. 4 2 3 1 4.88 [123.95mm] AC INPUT 3.00 [76.20mm] 1.125x.775 REC [28.58x19.69mm] 4.125 [104.78mm] INTERNATIONAL+ LINEARS 0.625 DIA. MTG. [15.87mm] 2 PLCS 2.088 [53.04mm] 0.75 [19.05mm] 1.15 [29.21mm] 1.25 [31.75mm] 14.00 [355.60mm] 13.000 [330.20mm] 0.50 [12.70mm] 2.5 [63.50mm] 0..20 [5.08mm] MAX. 1.250 [31.75mm] 2.75 [69.84mm] 0.75 [19.05mm] 0.188 DIA. MTG. 16 PLCS E CASE (WT. 10LBS.) 0.218[5.54mm] DIA. MTG. HOLES (16 PLACES) D.C. OUTPUT 0.375 [9.53mm] 4.88 [123.95mm] 4.125 [104.78mm] 16.000 [406.40mm] CLEARANCE 0.625 [15.88mm] 2.500 [63.50mm] 16.75 [425.45mm] 0.30 [7.62mm] MAX. 1.50 [38.10mm] MAX. 0.375 [9.53mm] 2.500 [63.50mm] 3.50 [88.90mm] 0.625 [15.88mm] AC INPUT F CASE (WT. F5: 14LBS.; F15,24: 18LBS.)/G CASE (WT. G5: 19LBS.) 0.525 [13.34mm] 0.25 [6.35mm] MAX. D.C. OUTPUTS 0.188 DIA. [4.78mm] MTG. HOLES 16PL 0.156 [3.96mm] DIA. MTG. HOLES 4 PLCS. 0.10 [2.54mm] MAX LEAD PROTRUSION 4 2 3 1 5 AC INPUT +OUT +S -S -OUT 4.125 [104.78mm] OVP-12 OPTIONAL 1 J1 7 4.88 [123.95mm] 4.25 [107.95mm] F1 F2 6.250 [158.75mm] 1.250 [31.75mm] 0.375 0.030 [9.53 0.76mm] OUTPUT 1 V.ADJ. 3.750 [95.25mm] OUTPUT 3 V.ADJ. .75 [19.05mm] J2 [31.75mm] [19.05mm] 2.75 [69.85mm] 1.250 0.75 0.25 [6.35mm] 1.70 [43.18mm] 0.25 [6.35mm] 1 2.750 [69.85mm] 3.25 [82.55mm] 7.00 [177.80mm] N CASE (WT. 7LBS.) OUTPUT 2 V.ADJ. 5 L CASE (WT. 1LB.) Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 57 INTERNATIONAL+ LINEARS INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS: 0.25 [6.35mm] 4.00 [101.60mm] 0.450 [11.43mm] MAX. INTERNATIONAL+ LINEARS DC OUTPUT -OUT -S +S +OUT DC OUTPUT -OUT -S S COM S COM 6.50 [165.10mm] 0.450 [11.43mm] MAX. 4.88 [123.95mm] 7.00 [177.80mm] 5.750 [146.05mm] OVP-12 OPTIONAL +S +OUT 6.250 [158.75mm] OVP-12 OPTIONAL AC INPUT 4 2 3 1 AC INPUT 4 2 3 1 0.25 [6.35mm] [4.78mm] 0.188 DIA. MTG. HOLES 8PL 3.375 [85.73mm] 0.25 [6.35mm] 0.75 [19.05mm] 1.250 [31.75mm] 0.75 [19.05mm] 1.80 [45.72mm] MAX. 1.62 [41.15mm] [4.78mm] 0.188 DIA. MTG. HOLES 12PL 4.125 [104.78mm] 2.50 [63.50mm] 1.250 [31.75mm] 0.75 [19.05mm] 0.75 [19.05mm] AA CASE (WT. 2LBS.) +OUT -OUT +OUT -OUT OUTPUT 1 OUTPUT 2 DC OUTPUT 1 3 2 4 0.30 [7.62mm] MAX. AC INPUT 8.375 [212.72mm] 2.75 [69.85mm] 0.25 [6.35mm] 0.625 MAX. [15.88mm] +OUT 0.50 [12.70mm] 4.00 [101.60mm] 1.250 [31.75mm] 1.250 [31.75mm] 0.50 [12.70mm] +S -OUT DC OUTPUT 4.125 [104.78mm] 0.25 [6.35mm] 10.25 [260.35mm] +S -S -S COM S +OUT 4 2 3 1 OVP-12 OPTIONAL -OUT 3.375 [85.73mm] 9.250 [234.95mm] 1.250 [31.75mm] 0.75 [19.05mm] 1.250 [31.75mm] 2.50 [63.50mm] 0.75 [19.05mm] 0.75 [19.05mm] 9.38 [238.25mm] CC CASE (WT. 7LBS.) [4.78mm] 0.188 DIA. MTG. HOLES 16PL BAA CASE (WT. 5LBS.) Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 58 0.450 [11.43mm] MAX. DC OUTPUT AC INPUT 0.188 DIA. [4.78mm] MTG. HOLES 16PL OVP OPTIONAL 4.88 [123.95mm] BB CASE (WT. 4LBS.) 0.75 [19.05mm] INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS: +S +S +OUT -OUT DC OUTPUT -S COM S -OUT -OUT DC OUTPUT OVP OPTIONAL AC INPUT 4 2 3 1 +S +S DC +OUT OUTPUT +OUT S COM 4.88 [123.95mm] 1.250 [31.75mm] -OUT DC OUTPUT AC INPUT 4.125 [104.78mm] OVP OPTIONAL 5.00 [127.00mm] 4.950 [125.73mm] 0.30 [7.62mm] MAX. 3.800 [96.52mm] 0.75 [19.05mm] 2.75 [69.85mm] 1.250 [31.75mm] 1.250 [31.75mm] 0.75 [19.05mm] 0.75 [19.05mm] 0.188 DIA. [4.78mm] MTG. HOLES 16PL 11.00 [279.40mm] CBB CASE (WT. 8LBS.) DBB CASE (WT. 11LBS.) 0.25 [6.35mm] DC OUTPUT 0.625 [15.88mm] MAX. 2.500 [63.50mm] 1 3 2 4 -OUT I.LIMIT S COM 4.88 [123.95mm] 3 1 -S 4.125 [104.78mm] 4.125 [104.78mm] -OUT -S [123.95mm] V.ADJ. AC INPUT +S +OUT +OUT -V ADJ. 15.00 [381.00mm] [4.78mm] 0.188 MTG. HOLES 16 PLCS DC OUTPUT +S +V ADJ. 4 2 0.25 [6.35mm] +S +OUT S COM -S -OUT +S +OUT -S -OUT 0.625 [15.88mm] AC INPUT DC OUTPUT 0.50 [12.70mm] 1.250 [31.75mm] 0.75 [19.05mm] 2.75 [69.85mm] 0.188 DIA. [4.78mm] MTG. HOLES 16 PLCS 0.700 [17.78mm] MAX. -S 1 3 2 4 4.125 [104.78mm] 7.500 [190.50mm] 3.00 [76.20mm] 0.25 [6.35mm] 14.25 [361.95mm] -S -S +OUT 4.88 [123.95mm] 0.525 [13.34mm] MAX. INTERNATIONAL+ LINEARS 0.25 [6.35mm] 0.188 [4.78mm] DIA. MTG. HOLES 16PL 0.75 [19.05mm] 14.000 [355.60mm] 0.75 [19.05mm] 1.250 [31.75mm] 3.75 [95.25mm] 2.500 [63.50mm] 0.30 [7.62mm] MAX. 11.00 [279.40mm] 7.000 [177.80mm] 0.50 [12.70] 0.75 [19.05mm] 2.75 [69.85mm] 1.250 [31.75mm] 0.75 [19.05mm] DCC CASE (WT. 12LBS.) NBB CASE (WT. 12LBS.) Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 59