B45197-A, B45198-R Tantalum Chip Capacitors SpeedPower (Low ESR) Construction Polar tantalum capacitors with solid electrolyte Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Features High volumetric efficiency Excellent solderability Stable temperature and frequency characteristics Low leakage current, low dissipation factor Low self-inductance High resistance to shock and vibration Suitable for use without series resistor Low ESR Applications Telecommunications (e.g. mobile phones, private branch exchanges) Data processing (e.g. laptops, main frames) Measuring and control engineering Automotive electronics Medical engineering DC/DC converters Soldering Suitable for reflow soldering (IR and vapor phase) and wave soldering Delivery mode Taped and reeled in accordance with IEC 60286-3 Ordering code structure B45197-A1225-+40* Reel diameter 9 = 180 mm, 6 = 330 mm Passive component Case size 30 = C, 40 = D, 50 = E Tantalum capacitor Capacitance tolerance M = 20 %, K = 10 %, J = 5 % Rated capacitance First two digits = significant figures Third digit = exponent Series 197 = tinned terminals Sn90/Pb10 198 = gold-plated terminals Voltage (code number) Code 0 is omitted 59 11/00 B45197-A, B45198-R Tantalum Chip Capacitors SpeedPower (Low ESR) Specifications and characteristics in brief For characteristic curves see page 73. SpeedPower (Low ESR) Series B45197-A B45198-R Terminals Rated voltage VR (up to 85 C) tinned 6,3 ... 50 Vdc gold-plated Rated capacitance CR 3,3 ... 680 F Capacitance tolerance 10 %, 20 % 5 % (on request) at 40 C; VR, RS 3 /V (1 fit = 1 . 10-9 failures/h) Failure rate CR * VR 330 F * V CR * VR > 330 F * V CR * VR > 330 F * V Service life Leakage current (VR, 5 min, 20 C) ESR Detail specification (tinned terminals) IEC climatic category 8 fit 12 fit/24 fit1) 24 fit (refer to series B4519*-H, "HighCap" > 500 000 h 10 nA/C 100 ... 600 m CECC 30801-805 in accordance with IEC 60068-1 55/125/56 (-55/+125 C; 56 days damp heat test) 1) HighCap types 60 11/00 B45197-A, B45198-R Tantalum Chip Capacitors SpeedPower (Low ESR) Dimensional drawing W2 W2 L2 L W 1 H2 H 2 P P Encapsulation: molded epoxy resin NiFe; surface Sn90/Pb10 or Positive pole marking Marking gold-plated KTA0209-E Positive pole marking Case size Dimensions in mm (inches) L W H L2 typ. W2 0,1 H2 typ. (,004) p 0,3 (,012) C (30) 6,0 0,3 (,236,012) 3,2 0,3 (,126,012) 2,5 0,3 (,098,012) 5,8 (,228) 2,2 (,087) 1,5 (,059) 1,3 (,051) D (40) 7,3 0,3 (,287,012) 4,3 0,3 (,169,012) 2,8 0,3 (,110,012) 7,1 (,280) 2,4 (,094) 1,6 (,062) 1,3 (,051) E (50) 7,3 0,3 (,287,012) 4,3 0,3 (,169,012) 4,1 0,3 (,157,012) 7,1 (,280) 2,4 (,094) 1,6 (,062) 1,3 (,051) 61 11/00 B45197-A, B45198-R Tantalum Chip Capacitors SpeedPower (Low ESR) Marking Case sizes C, D, E Manufacturer's logo Internal code for production equipment EPCOS Positive pole (bar) Date code Rated voltage, (not coded) V R = 6,3 V is abbreviated as 6. Capacitance (in coded form) KTA0113-1 Capacitance coding 1st and 2nd digit 3rd digit Capacitance in pF Multiplier: 4 = 104 pF 5 = 105 pF 6 = 106 pF 7 = 107 pF Date coding Year K = 1998 L = 1999 M = 2000 N = 2001 P = 2002 R = 2003 Month 1 = January 2 = February 3 = March 4 = April 5 = May 6 = June 7 = July 8 = August 9 = September O = October N = November D = December In addition to the year and month of manufacture, the stamp includes another two figures which internally allow us an assignment to concrete production equipment. 62 11/00 B45197-A, B45198-R Tantalum Chip Capacitors SpeedPower (Low ESR) Overview of available types Series B45197-A, tinned terminals (Sn90/Pb10) B45198-R, gold-plated terminals VR (Vdc) up to 85 C 6,3 10 16 20 25 35 50 CR (F)1) 3,3 C 4,7 C 6,8 10 C C 15 C C 22 C 33 C 68 D D C D 100 C D 150 D E D E 220 D E D E 330 D E D 470 D E 680 C D E E C D E E D E D C C E D E E E C D D E D E C D D E D E C D D E E D D E E E E E E E Upon request 1) Additional ratings upon request 63 D D D C 47 D C 11/00 B45197-A, B45198-R Tantalum Chip Capacitors SpeedPower (Low ESR) Technical data and ordering codes VR CR up to 85C (up to 125C) Vdc F 6,3 (4) 22 33 68 100 100 150 150 220 220 330 330 470 470 680 10 15 22 33 47 47 68 68 100 100 100 150 150 220 220 330 330 470 10 (6,3) Case size tan max Ilk, max ESRmax2) Iac Ordering code1) (20C, (20C,VR, (20C, 100 (20C, 100 kHz) Tinned terminals 120 Hz) 5 min) kHz) C C D C D D E D E D E D E E C C C C C D C D C D E D E D E D E E 0,06 0,06 0,06 0,08 0,08 0,08 0,08 0,08 0,08 0,12 0,08 0,15 0,12 0,15 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,08 0,08 0,08 0,08 0,08 0,10 0,08 0,12 0,10 0,12 A m A (Sn90/Pb10) 1,4 2,1 4,3 6,3 6,3 9,5 9,5 14 14 21 21 30 30 43 1,0 1,5 2,2 2,3 4,7 4,7 6,8 6,8 10 10 10 15 15 22 22 33 33 47 375 350 175 150 125 100 100 100 100 100 100 150 100 100 400 400 375 375 300 200 250 150 250 100 100 100 100 100 100 150 100 100 0,54 0,56 0,93 0,86 1,10 1,22 1,28 1,22 1,28 1,22 1,28 1,0 1,28 1,28 0,52 0,52 0,54 0,54 0,61 0,87 0,66 1,00 0,66 1,22 1,28 1,22 1,28 1,22 1,28 1,0 1,28 1,28 B45197-A1226-+30* B45197-A1336-+30* B45197-A1686-+40* B45197-A1107-+30* B45197-A1107-+40* B45197-A1157-+40* B45197-A1157-+50* B45197-A1227-+40* B45197-A1227-+50* B45197-A1337-+40* B45197-A1337-+50* B45197-A1477-+40* B45197-A1477-+50* B45197-A1687-+50* B45197-A2106-+30* B45197-A2156-+30* B45197-A2226-+30* B45197-A2336-+30* B45197-A2476-+30* B45197-A2476-+40* B45197-A2686-+30* B45197-A2686-+40* B45197-A2107-+30* B45197-A2107-+40* B45197-A2107-+50* B45197-A2157-+40* B45197-A2157-+50* B45197-A2227-+40* B45197-A2227-+50* B45197-A2337-+40* B45197-A2337-+50* B45197-A2477-+50* Upon request 1) Replace 197-A by 198-R for gold-plated terminals + Code letter for capacitance tolerance: M = 20 %, K = 10 % (J = 5 % upon request) * Code number for reel diameter: 9 = 180 mm, 6 = 330 mm 2) Other values upon request 64 11/00 B45197-A, B45198-R Tantalum Chip Capacitors SpeedPower (Low ESR) VR CR up to 85C (up to 125C) Vdc F 16 (10) 10 15 33 33 47 47 68 68 68 100 100 150 150 220 6,8 10 22 33 33 47 47 68 68 100 20 (13) Case size ESRmax2) Iac tan max Ilk, max Ordering code1) (20C, (20C,VR, (20C, 100 (20C, 120 Hz) 5 min) kHz) 100 kHz) Tinned terminals C C C D C D C D E D E D E E C C D D E D E D E E 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,08 0,08 0,10 0,08 0,10 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,08 A m A (Sn90/Pb10) 1,6 2,4 5,3 5,3 7,5 7,5 11 11 11 16 16 24 24 35 1,4 2,0 4,4 6,6 6,6 9,4 9,4 14 14 20 450 400 300 200 300 175 250 150 150 150 100 150 100 100 475 450 200 200 200 250 150 300 200 150 0,49 0,52 0,61 0,87 0,61 0,93 0,66 1,0 1,05 1,0 1,28 1,0 1,28 1,28 0,48 0,49 0,87 0,87 0,91 0,77 1,05 0,71 0,91 1,05 B45197-A3106-+30* B45197-A3156-+30* B45197-A3336-+30* B45197-A3336-+40* B45197-A3476-+30* B45197-A3476-+40* B45197-A3686-+30* B45197-A3686-+40* B45197-A3686-+50* B45197-A3107-+40* B45197-A3107-+50* B45197-A3157-+40* B45197-A3157-+50* B45197-A3227-+50* B45197-A4685-+30* B45197-A4106-+30* B45197-A4226-+40* B45197-A4336-+40* B45197-A4336-+50* B45197-A4476-+40* B45197-A4476-+50* B45197-A4686-+40* B45197-A4686-+50* B45197-A4107-+50* Upon request 1) Replace 197-A by 198-R for gold-plated terminals + Code letter for capacitance tolerance: M = 20 %, K = 10 % (J = 5 % upon request) * Code number for reel diameter: 9 = 180 mm, 6 = 330 mm 2) Other values upon request 65 11/00 B45197-A, B45198-R Tantalum Chip Capacitors SpeedPower (Low ESR) VR CR up to 85C (up to 125C) Vdc F 25 (16) 4,7 15 22 22 33 33 47 47 3,3 4,7 6,8 6,8 10 10 15 15 22 33 4,7 6,8 10 35 (23) 50 (33) Case size ESRmax2) Iac tan max Ilk, max Ordering code1) (20C, (20C,VR, (20C, 100 (20C, 120 Hz) 5 min) kHz) 100 kHz) Tinned terminals C D D E D E D E C D D E D E D E E E D E E 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 0,06 A m A (Sn90/Pb10) 1,2 3,8 5,5 5,5 8,3 8,3 12 12 1,2 1,6 2,4 2,4 3,5 3,5 5,3 5,3 7,7 12 2,4 3,4 5,0 525 230 230 230 230 200 250 200 550 300 300 300 260 260 260 260 260 260 300 300 300 0,46 0,81 0,81 0,85 0,81 0,91 0,77 0,91 0,45 0,71 0,71 0,74 0,76 0,80 0,76 0,80 0,80 0,80 0,71 0,74 0,74 B45197-A5475-+30* B45197-A5156-+40* B45197-A5226-+40* B45197-A5226-+50* B45197-A5336-+40* B45197-A5336-+50* B45197-A5476-+40* B45197-A5476-+50* B45197-A6335-+30* B45197-A6475-+40* B45197-A6685-+40* B45197-A6685-+50* B45197-A6106-+40* B45197-A6106-+50* B45197-A6156-+40* B45197-A6156-+50* B45197-A6226-+50* B45197-A6336-+50* B45197-A7475-+40* B45197-A7685-+50* B45197-A7106-+50* Upon request 1) Replace 197-A by 198-R for gold-plated terminals; replace 197-A by 117-R for tinned (Sn100) terminals + Insert code for required capacitance tolerance: M = 20 %, K = 10 % (J = 5 % upon request) 1) Replace 197-Aletter by 198-R for gold-plated terminals Insert letter code for number for required reel diameter: = 180 6 =(J330 capacitance tolerance: M = 209%, K = mm, 10 % = mm 5 % upon request) *+ Code 2) Other values upon request Code number for reel diameter: 9 = 180 mm, 6 = 330 mm * 2) Other values upon request 66 11/00 Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 Munchen, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfaltigung, Veroffentlichung, Verbreitung und Verwertung dieser Broschure und ihres Inhalts ohne ausdruckliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschure werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen fur Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschure ersetzt die vorige Ausgabe. Fragen uber Technik, Preise und Liefermoglichkeiten richten Sie bitte an den Ihnen nachstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente konnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskunfte daruber bitten wir unter Angabe des betreffenden Typs ebenfalls uber die zustandige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS' prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 1