Document No. TRM-060S004F Thick Film Chip Resistors (Lead-Free for RM06 Series) Issued date 2007/07/17 page 1/12 1. Scope : This specification applies for the RM06 Series of thick film chip resistors made by TA-I. 2. Construction: Over Coat (Color : Black) Conductor : (Lead-free or with lead ) Sn Plating Resistive Element Ni Plating Ceramic Substrate 3. Type Designation: 06 RM Product Code RM : Chip Resistor Size J TN Tolerance Packaging Power Rating 06-0603(1608) 1/10W 103 Nominal Resistance J - 5% G - 2% F - 1% T - Paper Tape +N: Lead-Free D - 0.5% Special : B - 0.1% L : 06 -2mm pitch paper Tape 3 digits, e.g.,: (E-24) 103 = 10k 0 = 0 4 digits, e.g.,: (E-96) 1540 = 154 43R2 = 43.2 TA-I TECHNOLOGY CO., LTD Document No. TRM-060S004F Thick Film Chip Resistors (Lead-Free for RM06 Series) Issued date 2007/07/17 page 2/12 4. Dimensions: UNIT: mm Type L RM06 1.600.10 W C d 0.800.10 0.300.20 t +0.2 0.30 0.450.10 -0.1 5. Ratings & Characteristics : Type Power Rating at 70 Rated Voltage Max. Working Voltage Max. OverLoad Voltage Resistance Range() T.C.R (PPM/) 100 RM06 1/10W Refer 5.2 50V 100V B(0.1%) E-96 D(0.5%) E-96 F(1%) E-96 10-560k 10-1M 10-1M 200 G(2%) E-24 1MR10M 10-10M 1-9.1 400 1-9.1 J(5%) E-24 10-10M 1-9.1 10MR22M O THICK FILM CHIP RESISTORS Type RM06 Rated Current 1A Max Overload Current Resistance Range 2.5A 50m MAX 2. Operating Temp(): : -55 +125 Note : Except for the above standardized products , we also provide the customized products. TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No. TRM-060S004F (Lead-Free for RM06 Series) Issued date 2007/07/17 page 3/12 5.1 Derating Curve : For resistors operated at ambient temperature over 70 , power rating shall be derated in accordance with figure 1. P max. 100 Power ratio ( % ) 50 0 -55 50 70 100 125 Ambient Temp. ( C ) Figure 1 5.2 Rated Voltage: The rated voltage is calculated by the following formula: E= P*R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value() E.G. : What is RM06JTN102 the rated voltage ? RM06JTN102 P:1/10W ; R:102 = 1K = 1000 E= 0.1(W) * 1000() = 10 (V) TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors (Lead-Free for RM06 Series) Document No. TRM-060S004F Issued date 2007/07/17 page 4/12 6. Reliability Tests: (As specified in JIS C 5202) Reference standard Test Items Temperature Resistance Coefficient of Condition of Test JIS-C5202-5.2 -55 +125 Short Time Overload JIS-C5202-5.5 2.5 X rated voltage Intermittent Overload JIS-C5202-5.8 Test Limits Refer 5.0 (1% + 0.05 ) Load Life for 5 sec 0 JIS-C5202-7.10 3.0 X rated voltage or Max Overloading voltage ,1sec "ON" , 25sec "OFF" , 10000 cycle 1000 hours at rated voltage, 70 , 1.5hours "ON ", 0.5hour "OFF" (5.0% + 0.1) 0 : JIS-C5202-7.9 Rapid Change of Temperature JIS-C5202-7.4 1000 hours at rated voltage , 402, 90~95% RH 1.5hours "ON ", 0.5hour "OFF" -55 (30 min. ) / +155 (30 min. ) 5 cycles 50m or less 0.5%,1%:(1.0%+0.05) 2%,5%:(3.0%+0.1) 0 Load Life with Humidity : 50m or less : 100m or less 0.5%,1%:(1.0%+0.05) 2%, 5%:(3.0%+0.1) 0 : 100m or less Without mechanical damage 0.5%,1% : (0.5%+0.05) 2%, 5% :(1.0%+0.05) 0 : Solderability Robustness (Bending) of Termination JIS-C5202-6.11 2455 solder, 20.5 sec dwell. Solder : Sn96.5 / Ag3.0 / Cu0.5 JIS-C5202--6.1 3mm deflection 50m or less At least 95% of surface area of electrode shall be covered with new solder. 0.5%,1%:(0.5%+0.05) 2%,5%:(1.0%+0.05) 0: 50m or less Dielectric Withstanding JIS-C5202-5.7 Voltage (Voltage Proof) Applying voltage : 300V for a minute . No abnormalities such as flashover, burning dielectric breakdown shall appear. Insulation Resistance Applying voltage 100V for 1 minute. 1G Resistance to Dry Heat JIS-C5202-5.6 JIS-C5202-7.2 1255 for 964Hrs 0.5%,1% :(1.0%+0.05) 2%,5% : (2.0%+0.1) 0: Resistance to Solder Heat JIS-C5202-6.10 270 5 solder , 10 1 sec dwell . 50m or less 0.5%,1%:(0.5%+0.05) 2%, 5%:(1.0%+0.05) 0: 50m or less TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors (Lead-Free for RM06 Series) Document No. TRM-060S004F Issued date 2007/07/17 page 5/12 Component , Lead-Free Soldering part 8 : Solder Heat Resistance Test for SMD. LeadFree Soldering " Whisker SONY SS-00254-8 Temp. Cycles : -35 5 / 125 5 , Keep 7 min Testing duration : 5004 hours Temp. Humidity Chambers: Temperature : 85 Humidity : 85% RH Testing duration : 5004 hours Whisker formation : 50 um or less . . Component , Lead-Free Soldering part 5 : Solder Heat Resistance Test for SMD. LeadFree Soldering " Resistance to Solder Heat SONY SS-00254-5 Flow Solder : Pre - heat : 100 to 105 305 sec Temperature : 2603 10 +1/ -0 sec The entire sample shall be dipped in solder. The specimen shall be stored at standard atmospheric conditions for 1 hour . Electrical characteristics shall be Satisfied . Without distinct deformation in appearance Iron Solder : Bit temperature : 350 10 Application time of soldering iron : 3 +1/- 0sec Apply the soldering iron to the electrode . The specimen shall be stored at standard atmospheric conditions for 1 hour , after which the measurements shall be made Note* : RCWV : Rated continuous working voltage . 7. Marking : 7.1 2% & 5%(E24) Resistance value is expressed by 3 digits, the first two digits represent the significant figures of nominal resistance value in, and the third digit represents exponent for base of 10. E.G. :, 472 = 47x102 = 4700 = 4.7K 7.2 1% (E96 ) Resistance value is expressed by 4 digits or 3digits , the first three digits represent the significant figures of nominal resistance value in, and the fourth digit represents exponent for base of 10. E.G. : 4701 = 470x101 = 4700 = 4.7K TA-I TECHNOLOGY CO., LTD Document No. TRM-060S004F Thick Film Chip Resistors (Lead-Free for RM06 Series) Issued date 2007/07/17 page 6/12 7.3 1%(RM06/E96) When the marking space is too small in such small-sized resistors as RM06, the marking can not made by 4 digits and may be made by two digits combined with one English capital. Symbol for E96 series nominal resistance value Symbol 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 Symbol 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 E96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 Symbol 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 E96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 Symbol 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 E96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 Symbol for multipliers Symbol A multipliers 10 B 0 10 C 1 10 D 2 10 E 3 10 F 4 10 G 5 10 6 H 10 X 7 10 -1 Y 10 -2 Z 10-3 E.G : 02C = 102x102 = 10.2k Notes : When the resistance value is not in the list of E96 , 3 digitals with underline in E-24 series is used as mark . E.G. : 0603 , 120 , 1% Marking is 121 7.4 1%( E96/3digitals) The resistance value by 3 digits is requirement for customer. TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors (Lead-Free for RM06 Series) Document No. TRM-060S004F Issued date 2007/07/17 page 7/12 8. Taping & Reel : 8.1 Taping Dimensions 8.1.1 4 mm pitch paper : Packing Type A B W F E P1 P2 P0 D0 T Paper RM06 1.10.1 1.90.1 8.00.2 3.50.05 1.750.1 4.00.1 2.00.05 4.00.1 +0.1 1.5 -0 0.640.1 E P1 P2 8.1.2 Packing Paper Type RM06 Package Type RM Size 06 2 mm pitch paper : A B W F P0 D0 T +0.1 1.10.1 1.90.1 8.00.2 3.50.05 1.750.1 2.00.1 2.00.1 4.00.1 0.640.1 1.5 -0 Paper Tape 4 mm pitch 178mm/R 250mm/R 5000 10000 2 mm pitch 178mm/R 250mm/R 10000 20000 Bulk 20000 TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors (Lead-Free for RM06 Series) 8.1.3 8.2 Document No. TRM-060S004F Issued date 2007/07/17 page 8/12 Bulk Case Specifications: Reel Specifications: UNIT: mm Type A B C W RM06 178.0 2.0 60.0 1.0 13.0 1.0 T 9.0 1.0 11.5 1.0 8.3. Peel -off force : Peel -off force of paper and blister tape is in accordance with "JIS-C5202 " that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute. pull 300 mm/min top cover tape 1015 standard: 0.1 ~ 0.7 N carrier tape TA-I TECHNOLOGY CO., LTD Document No. TRM-060S004F Thick Film Chip Resistors (Lead-Free for RM06 Series) Issued date 2007/07/17 page 9/12 9. Label : 9.1 Manufacture Label : Date Code Resistance QTY: Tolerance Type 5000 PCS 102 Lot No: 00860166K- 0008 J 0603 9.2 Customer Label ( By customer request ): Lead-Free Products TA-I TECH Product Spec. Customer No: LEAD FREE 0603 5%(T) 1K 105A702723 RM06JTN102 04.05.21 Date Year Month 10. Recommended land patterns : Land pattern Type RM Size 06 (0603 ) a 0.7~0.9 Dimension b ( mm ) 2.0~2.2 c 0.8~1.0 TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors (Lead-Free for RM06 Series) Document No. TRM-060S004F Issued date 2007/07/17 page 10/12 11. Recommend IR - Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5) Peak : 250 +5 -0 , 5 sec Pre - heat Zone : 150 to 180 , 9030 sec Soldering Zone : 230 or higher , 3010 sec 12. Storage Conditions: Temperature : 5 to 35 Related Humidity :40% to 75% RH 13. Shelf Life : 2 Years from manufacturing date. 14. ECN : Engineering Change Notice: The customer will be informed with ECN if there is significant modification on the characteristics and materials described in Approval Sheet. TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No. TRM-060S004F (Lead-Free for RM06 Series) 15. Issued date 2007/07/17 page 11/12 Manufacturing Country & City : TA-I TECHNOLOGY CO., LTD. ( Taiwan- Tao Yuan ) Tel: 886-3-3246169 Fax : 886-3-3246167 Associated companies : (1) FORTUNE TASK RESISTOR FACTORY Tel : 86-769-8339-47903 ( China - Dongguan ) Fax : 86-769-8339-4794 (2) TA-I TECHNOLOGY (DONGGUAN ) CO., LTD. ( China -Dongguan ) Tel : 86-769-8339-47903 Fax : 86-769-8339-4794 (3) TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China - Su Zhou) Tel :86- 512-63457879 Fax : 86-512-63457869 (4) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia - Pulaupinang ) Tel :604- 3900480 Fax : 604-3901481 (5) P.T.TAI ELECTRONICS Indonesia ( Indonesia - Jakarta ) Tel :002-62-21-44820254 Fax : 002-62-21-44820256 TA-I TECHNOLOGY CO., LTD Thick Film Chip Resistors Document No. TRM-060S004F (Lead-Free for RM06 Series) Revise record Date Nov.25.2005 Issued date 2007/07/17 page 12/12 Content 4. Ratings & Characteristics : Adding Rating Voltage 5. Reliability Tests: Adding to Whisker & Resistance to soldering heat 7.3 Storage Conditions: Deleted to Storage Conditions 8.2 Customer Label Adding to Customer Label 10. Recommend IR - Reflow profile Adding to Recommend IR - Reflow profile 11. Storage Conditions: Adding to Storage Conditions: 12. Shelf Life Adding to Shelf Life : Owner Hank Liu 2. Conductor : Adding to (Lead-free or with lead) 3. Type Designation: 06-0603 changed 06-0603(1608) (E-24) 103 = 103 = 10k changed 103 = 10k 5. Ratings & Characteristics : Resistance Range() : Jul.10.2006 B(0.1%) E-96 (TCR100): 56-560k changed 10-560K D(0.5%)E-96(TCR100) : 56-560k changed 10-1M F(1%)E-96 (TCR200) : Adding To 1MR10M J(5%)E-24 (TCR400) : : Adding To 10MR20M Vincent 9.1 Manufacture label : Series number 3 codes changed to 4 codes 15. Manufacturing Country & City: Adding TA-I TECHNOLOGY (DONGGUAN ) CO., LTD Jul.17.2007 5. Ratings & Characteristics : Resistance Range () : Adding to 22M for 5% tolerance. Vincent TA-I TECHNOLOGY CO., LTD