AT25DF021A 2-Mbit, 1.7V-3.6V Minimum SPI Serial Flash Memory DATASHEET (ADDENDUM) High Temperature Operation (125C) This data sheet addendum is to be used in conjunction with the existing AT25DF021A datasheet specifications. The Adesto AT25DF021A 2Mbit Serial Flash devices will operate @ 125C with the following datasheet caveats. All other parameters will meet the existing datasheet specifications. The ordering code suffix (CAN# Code) 'HR' or 'HT' must be used to ensure correct operation at this extended temperature range. Adesto will not modify and republish the current datasheet to reflect the CAN# ordering code or the above caveats.The standard AT25DF021A datasheet is available at http://www.adestotech.com. 1. Electrical Specifications 1.1 DC and AC Operating Range AT25DF021A-xxxHR Operating Temperature -40C to +125C Endurance (Maximum) 20,000 Cycles 1.2 DC, AC, Program and Erase Characteristics 1.7V to 3.6V Symbol Parameter IUDPD IDPD ISB ICC3 (1)(2) 2.3V to 3.6V Typ Max Units 1 .3 1 A 5 40 8 40 A Standby Current 25 65 25 65 A Min Typ Max Ultra Deep Power-Down Current .2 Deep Power-Down Current Min Active Current, Program Operation 11 14.5 12 14.5 mA ICC4(1) (2) Active Current, Erase Operation 11 14.5 12 14.5 mA fSCK Maximum Clock Frequency for All Operation ( including 0Bh Opcode) 85 85 MHz fRDLF Maximum Clock Frequency for 03h 25 25 MHz fRDDO Maximum Clock Frequency for 3Bh Opcode 40 40 MHz tPP Page Program Time (256 Bytes) 2 6 2 5 ms tPE Page Erase Time 6 20 6 20 ms tBP Byte Program Time 12 Block Erase Time (4K) 45 100 45 100 ms Block Erase Time (32K) 300 700 300 700 ms Block Erase Time (64K) 500 1400 500 1400 ms Chip Erase Time 2.5 6 2.5 6 s tBLKE tCHPE 12 s DS-25DF021A-042D-11/2015 Typical values measured at 1.8V @ 25C for the 1.7V to 3.6V range. Typical values measured at 3.0V @ 25C for the 2.3V to 3.6V range. 1. 2. 2. Ordering Code 2.1 Green Package Options (Pb/Halide-free/RoHS Compliant) Ordering Code (1) Package Operating Voltage Max. Freq. (MHz) 1.7V to 3.6V 85MHz Operation Range AT25DF021A-SSHNHR-T 8S1 AT25DF021A-SSHNHR-B AT25DF021A-XMHNHR-T 8X AT25DF021A-XMHNHR-B AT25DF021A-MHNHR-T Extended (-40C to +125C) 8MA1 AT25DF021A-MHNHR-Y AT25DF021A-MAHNHR-T 8MA3 AT25DF021A-DWFHT (2) DWF 1. The shipping carrier option code is not marked on the devices. 2. Contact Adesto for mechanical drawing or Die Sales information. Package Type 8S1 8-lead, 0.150" Wide, Plastic Gull Wing Small Outline Package (JEDEC SOIC) 8X 8-lead, Thin Shrink Small Outline Package 8MA1 8-pad, 5 x 6 x 0.6mm, Thermally Enhanced Plastic Ultra Thin Dual Flat No-lead (UDFN) 8MA3 8-pad, 2 x 3 x 0.6mm, Thermally Enhanced Plastic Ultra Thin Dual Flat No Lead Package (UDFN) DWF Die in Wafer Form 3. Revision History Revision Level - Release Date History A - January 2015 Initial release. B - May 2015 Updated AC and DC Characteristics. C - May 2015 Added tray option to 5x6 UDFN. D - November 2015 Removed preliminary package note. (c) 2015 Adesto Technologies. All rights reserved. / Rev.: DS-25DF021A-042D-11/2015 Disclaimer: Adesto Technologies Corporation makes no warranty for the use of its products, other than those expressly contained in the Company's standard warranty which is detailed in Adesto's Terms and Conditions located on the Company's web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Adesto are granted by the Company in connection with the sale of Adesto products, expressly or by implication. Adesto's products are not authorized for use as critical components in life support devices or systems.