Bel-Stewart Connector Cable Ready Hand Tool Instructions P/N 2940010-01 Bel-Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 MN800007 Rev. A0 "Short-Body" Crimp Insert #2940008-01 "CAT5" Crimp Insert #2940009-01 "Cable Jack" Crimp Insert #2940015-01 "Cable Ready" Hand Tool #2940010-01 ASSEMBLY INSTRUCTIONS 1 2 1. Position "Crimp Insert" as shown, with p/n facing operator. 2. Slide "Insert" over hand tool t-latch till it `clicks' in place. NOTE: Insert can slide over t-latch incorrectly, but, will not `click' into position. Remove and re-install as shown in view 2.