CY3202-C - Cypress Semiconductor Corp

PSoC

Development Tools Selector Guide

The Cypress MicroSystems PSoC¥ Development Tools combine a full-featured hardware In-Circuit

Emulator (ICE) with outstanding PSoC Designer software to provide a powerful development environment

at value pricing. The easy-to-use software will increase your design efficiency and reduce debug and

evaluation time. PSoC Designer Device Editor enables rapid configuration of the PSoC device.

CY3205-DK Basic PSoC Development Kit

Everything you need to get started with PSoC is

included in the Development Kit with support

for the 28-pin PDIP package:

 PSoC Designer IDE Software CD-ROM

oDevice Editor

oApplication Editor

oAssembler

oDebugger

oTutorials/Training Material

oDevice Data Sheet

 ICE-4000 In-Circuit Emulator

 Generic ICE Pod

 28-PDIP Pod, Foot, and Mask  YProgrammer PCB with 28-PDIP Socket

 PSoC Pup Demonstration Board  Parallel Cable, CAT 5e Cable

 110 ~ 240V Power Supply, Euro-Plug Adapter  2 CY8C26443-24PI 28-PDIP Chip Samples

CY3202-C iMAGEcraft C Compiler

Taking advantage of the PSoC architecture, this optimizing C Compiler offers the designer increased

development speed and portability. Although licensed separately, the compiler is fully integrated into PSoC

Designer. PSoC Designer provides source-level debugging to round out its C-language support. Features

Include:

 ANSI C Compiler

 Inline Assembly and Interface with Assembly Modules

 Modern Stack-Based Architecture

 7 Basic Data Types Including IEEE 32-Bit Floating Point

 Assembler and Linker

 Math and String Libraries

 C Interrupt Service Routines

 Librarian

Emulation Pods for All Package Types

PSoC Emulator Pod Selection Guide

Emulation pods are available to support all pin counts for a particular package type. The pod kit includes the

generic pod, feet for all pin counts of a package type, masks, chip samples, and a simple blink-the-LED ‘Pup’

demo board (not included in the CY3203-2 kit).

Chip Part # Pod Kit Part # Package Type # of Feet Included

CY8C25122-24PI

CY8C26xxx-24PI CY3206-PI 8, 20, 28, 48 PDIP 1 Each

CY8C26xxx-24SI CY3206-SI 20, 28, SOIC 2 Each

CY8C26xxx-24PVI CY3206-PVI 20, 28, 48 SSOP 2 Each

CY8C26643-24AI CY3206-AI 44 TQFP 2

-- CY3203-2 --

None (Pod and 2

Each of 8/20 and

28-Pin Masks)

PSoC Emulator Replacement Pod Feet Selection Guide

The surface mount feet are soldered to the target PCB and are not reusable. Feet are delicate and may easily

damage. Order enough additional feet to support anticipated prototype requirements.

Chip Part # Spares Kit Part # Description

CY8C25122-24PI CY3203-012 2 Spare Pod Feet for 8-Pin DIP

CY8C26233-24PI CY3203-022 2 Spare Pod Feet for 20-Pin DIP

CY8C26233-24SI CY3203-050 10 Spare Pod Feet for 20-Pin SOIC

CY8C26233-24PVI CY3203-060 10 Spare Pod Feet for 20-Pin SSOP

CY8C26443-24PI CY3203-032 2 Spare Pod Feet for 28-Pin DIP

CY8C26443-24SI CY3203-070 10 Spare Pod Feet for 28-Pin SOIC

CY8C26443-24PVI CY3203-080 10 Spare Pod Feet for 28-Pin SSOP

CY8C26643-24PI CY3203-042 2 Spare Pod Feet for 48-Pin DIP

CY8C26643-24PVI CY3203-095 5 Spare Pod Feet for 48-Pin SSOP

CY8C26643-24AI CY3203-105 5 Spare Pod Feet for 44-Pin TQFP

Device Programming for Prototypes

YProgrammer boards are used with the ICE to program parts for system prototypes. The YProgrammer

board is connected to the ICE in place of the pod. A single ZIF socket is included.

Chip Part # YProgrammer Part # Package Type

CY8C25122-24PI CY3205-S1 8 PDIP

CY8C26233-24PI CY3205-S1 20 PDIP

CY8C26233-24SI CY3205-S2 20 SOIC

CY8C26233-24PVI CY3205-S3 20 SSOP

CY8C26443-24PI CY3205-S1 28 PDIP

CY8C26443-24SI CY3205-S2 28 SOIC

CY8C26443-24PVI CY3205-S3 28 SSOP

CY8C26643-24PI CY3205-S1 48 PDIP

CY8C26643-24PVI CY3205-S4 48 SSOP

CY8C26643-24AI CY3205-S5 44 TQFP

To accommodate the largest number of pin counts with each board, the largest socket is installed. For

example, the CY3205-S1 includes a 48-pin DIP socket. It therefore supports 8, 20, 28, and 48-pin DIP parts.

The CY3205-S3 includes a 28-pin SSOP socket that can accept both the 20 and 28-pin SSOP parts. The body

width of the 48-pin SSOP package is wider than the 20 and 28-pin so the CY3205-S4 is necessary for the

48-pin SSOP parts.

CY3203-032

CY3205-S1

Pup Pod

3rd Party Development Tools

Tools have been specially designed to accompany PSoC devices during development by the following 3rd-

party vendors. Specific details for each of these tools can be found online under 3rd Party Tools at

http://www.cypressmicro.com/.

Aries Development

The PSoC PROTO BOARD is a complete standalone

development board for evaluating and developing applications

using PSoC devices. It was created to give engineers the ability

to develop and test applications without creating their own

custom board. It is easily configurable to schematically “look

like” your end application. It allows development with any

PSoC device in a DIP package.

http://aries-development.com/devtools/PSoC.htm

Arista Systems

 SERIAL Interface, speeds up to 115k baud.

 Application works in Windows 95/98/Me/NT/2000/XP.

 Easy to use programming application.

 Serial command protocol documented so you can program

devices with your custom application.

 Multiple programmers can be connected to one computer.

 Supports reset or power-on programming mode

acquisition.

 3.3- and 5-volt compatible.

 When using power line to enable programming,

programmer can switch amps.

 All PSoC devices supported.

 Auto Serial Numbering, assigns unique serial numbers to devices when programming, even when using multiple

programmers over a network.

 Dual color LED on programmer turns red during programming.

 Multiple programming options, erase/verify/read/secure/retrieve checksums and device ID.

 Free software upgrades on the web for new PSoC devices in the future.

http://www.aristasystems.com/psocisp.htm

Orlin Technology

The OTPSoC Kit enables evaluation and prototyping of the complete family of

Cypress MicroSystems Programmable System-on-Chip (PSoC™) devices.

The OTPSoC retains compatibility with Cypress’ own PSoC Pup basic

evaluation board while adding a wealth of features to allow evaluation of the

complete feature-set of the entire PSoC device family.

The OTPSoC fully supports the Cypress MicroSystems PSoC-ICE for code

debug and both out-of-system and in-system programming.

http://www.orlin.com/OTPSoC.htm

For information and support with PSoC devices: http://www.cypressmicro.com/.

Items may be purchased online at the Cypress Online Store: http://www.onfulfillment.com/cypressstore/.

Or you can purchase your Development Tools from one of Cypress’ accredited e-commerce distributors.

http://www.cypressmicro.com/ / http://www.cypress.com/aboutus/sales_locations.cfm / support@cypressmicro.com

PSoC™ (Programmable System on Chip) is a trademark of Cypress MicroSystems, Inc.

All other trademarks or registered trademarks referenced herein are property of the respective corporations.

The information contained herein is subject to change without notice.

Cypress MicroSystems, Inc.

22027 17th Ave. SE Suite 201

Bothell, WA 98021

Phone: 877.751.6100

Fax: 425.939.0999