CM6407 EMI Filters with ESD Protection for Data Line Applications Product Description http://onsemi.com The CM6407 is an 18-bump EMI filter with ESD protection device for data line application in a 0.4 mm pitch, 5 x 4 CSP form factor. It is fully compliant with IEC 61000-4-2 Level 4. The CM6407 is RoHS II compliant. Features * 18-Bump, 1.96 mm X 1.56 mm Footprint Chip Scale Package * These Devices are Pb-Free and are RoHS Compliant WLCSP18 CASE 567CG ELECTRICAL SCHEMATIC R I/O (1:7) L I/O (1:7) Bottom Zener (Common to all Channels) MARKING DIAGRAM + 6407 YYWW XXXX 6407 YYWW XXXX = CM6407 = Date Code = Last four digits of lot# ORDERING INFORMATION Device Package Shipping CM6407 CSP-18 (Pb-Free) 5000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2011 April, 2011 - Rev. 3 1 Publication Order Number: CM6407/D CM6407 PACKAGE / PINOUT DIAGRAMS Top View (Bumps Down View) Orientation Marking Bottom View (Bumps Up View) + 6407 A1 Corner Indicator Table 1. PIN DESCRIPTIONS A5 = Line 1 A4 = Line 2 A3 = GND B5 = Line 3 A2 = Line 1 A1 = Line 2 B3 = GND B1 = Line 3 C5 = Line 4 C4 = Line 5 C3 = GND C2 = Line 4 C1 = Line 5 D5 = Line 6 D4 = Line 7 D3 = GND D2 = Line 6 D1 = Line 7 ELECTRICAL SPECIFICATIONS AND CONDITIONS Table 2. PARAMETERS AND OPERATING CONDITIONS Parameter Rating Units Storage Temperature Range -55 to +150 C Operating Temperature Range -40 to +85 C 60 mW Power Dissipation at 70C per Channel Table 3. ELECTRICAL OPERATING CHARACTERISTICS (Note 1) Symbol Parameter Conditions R Resistance L Inductance (Note 2) C Capacitance per Channel At 1 MHz, VIN = 0 V Min Typ Max 100 125 150 35 19 At 1 MHz, VIN = 2.5 V Att(5) Passband Attenuation at 5 MHz FC Cut-off Frequency ZSOURCE = 50 W, ZLOAD = 50 W VBR Breakdown Voltage IR = 1 mA ILEAK Leakage Current per Channel VIN = 3.0 V VESD ESD Peak Discharge Voltage Protection at All Pins: a) Contact Discharge per IEC 61000-4-2 standard b) Air Discharge per IEC 61000-4-2 standard (Note 2) 6 15 15 1. All parameters specified at TA = 25C unless otherwise noted. 2. Standard IEC 61000-4-2 (CDischarge = 150 pF, RDischarge = 330 W). http://onsemi.com 2 24 Units W nH 29 pF 15 pF -7 dB 250 MHz 7.8 10 V 10 100 nA kV CM6407 RF CHARACTERISTICS Figure 1. Typical Insertion Loss (Bias = 0 V, TA = 255C, 50 W Environment) http://onsemi.com 3 CM6407 PACKAGE DIMENSIONS WLCSP18, 1.96x1.56 CASE 567CG-01 ISSUE O E E PIN A1 REFERENCE 2X D A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. COPLANARITY APPLIES TO SPHERICAL CROWNS OF SOLDER BALLS. B DIM A A1 A2 b D E e E 0.05 C 2X 0.05 C TOP VIEW MILLIMETERS MIN MAX 0.63 0.57 0.17 0.24 0.41 REF 0.24 0.29 1.96 BSC 1.56 BSC 0.40 BSC A2 0.05 C RECOMMENDED SOLDERING FOOTPRINT* A 0.05 C NOTE 3 18 A1 b 0.05 C A B 0.03 C SIDE VIEW C SEATING PLANE PACKAGE OUTLINE A1 e D 0.40 PITCH e C 18X 0.40 PITCH B A 1 2 3 4 0.25 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 5 BOTTOM VIEW ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative CM6407/D