Display Lights LT1 Series LT1 Series -- SignaLightTM Light Towers Display Lights with a Tower of Advantages Base Mount Display Lights C Key features of the LT1 series SignaLight towers include: * Custom configurations meet your specifications -- simply * Select your flash preference, lens colors, number of tiers, mounting style, and voltage * Choice of LED or incandescent lamps LED lamps provide over 100,000 hours of service life and are interchangeable with incandescent bulbs Incandescent lamps (available up to 10 watts) are vibrationresistant and provide a 2,000 hour service life * Replace the bulbs independently; no need to disassemble the entire unit * Heat- and shock-resistant polycarbonate lenses * Flashing models allow each lamp to be flashed or steady * Choice of metallic base or cost-saving plastic base * Color-coded wires make assembly and wiring easy * Mounting options include base and pole mount Pole Mount (with "L" bracket) File No. E70646 C-4 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Display Lights LT1 Series LT1A: Incandescent, Non-Flashing LT1D: Incandescent, Flashing/Non-Flashing LT1H: LED, Non-Flashing LT1K: LED, Flashing/Non-Flashing Nominal Voltage 12V AC/DC 10% 24V AC/DC 10% 120V AC 10% 240V AC 10% Internal Fuse Rating 3.15A 3.15A 1A 1A LED 12V AC/DC 24V AC/DC 120V AC N/A Incandescent 12V, 5W 30V, 10W 120V, 7W 240V, 10W Lamp Rating Current Required per Lamp Incandescent Specifications 12VDC LED 54mA Green Yellow White 78mA 54mA 54mA Blue 78mA 24VDC 54mA 39mA 54mA 54mA 39mA 120VAC 30mA 30mA 30mA 30mA 30mA N/A 0.4A 10% 0.3A 10% 0.06A 10% 0.05A 10% External Contact Capacity 5A 5A 2A 1A In-Rush Current per Lamp LED Not applicable Incandescent Below 4.0A Below 3.0A Below 0.6A Below 0.5A Lamp Style LED BA15D lamp base Incandescent T20 glass bulb, BA15D lamp base Lamp Life-Span LED 100,000 hours (minimum) Incandescent 2,000 hours (average) Lens Colors Red, Yellow, Green, Blue, White Lens Diameter 2.20" (56mm) Maximum Tiers 5 Degree of Protection IP20 (for indoor use only), NEMA1 Flash Rate LED: 45/minute 10% (LT1K only) Incandescent: 80/minute 10% (LT1D only) Insulation Resistance More than 3M by a DC 500V megger Voltage Resistance 1,500V AC for 1 minute Operating Range -30 to +40C (LT1A), -10 to +40C (LT1D), 15 to 90% relative humidity Vibration Resistance 2.2G maximum Base mount (three stud) Pole mount (horizontal or vertical surface) NPT mount (via adaptor) to 1/2" or 3/4" NPT conduit Install in an upright position Mounting Optional Pole Height 10.75" (273mm) Approvals Wire Size www.idec.com Display Lights Red C File No. E70646 Non-flashing (steady): 20 AWG Flashing: 18 AWG and 20 AWG USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC C-5 Display Lights LT1 Series SignaLightTM Part Numbers (assembled) Part Number Guide LT1 A - Light source and function Display Lights C 3 5 3 - R Number Voltage Mounting of tiers style and base designation Part Numbers: Assembled Parts Description Box No. Light source and function Number of tiers Voltage Mounting style and base designation - Color code Y Color code To determine the appropriate SignaLight part number, use these numbered boxes in conjunction with the codes in the Part Numbers: Assembled Parts table below. Code Non-flashing (steady), incandescent lamp A Flashing/non-flashing, incandescent lamp D Non-flashing (steady), LED lamp H Flashing/non-flashing, LED lamp K Maximum of 5 tiers G 1-5 12V AC/DC 1 24V AC/DC 2 120V AC 5 240V AC (incandescent only) 8 Beige frame cover 1 Metallic frame cover 2 Beige frame cover, pole incl. 3 Metallic frame cover, pole incl. 4 Red R Yellow Y Green G Blue S White W Specify lens color code from the lowest to the highest tier. Examples: Assembled Parts Part No. Description LT1A-354-RRR Non-flashing incandescent, 3 tiers, 120V AC, pole-mount, metallic base, all Red lenses LT1D-182-S Flashing/non-flashing incandescent, 1 tier, 240V AC, basemount, metallic base, Blue lens LT1D-221-RS Flashing/non-flashing incandescent, 2 tier, 24V AC/DC, base-mount, plastic base, Red and Blue lenses LT1H-412-RGYW Non-flashing LED, 4 tier, 12V AC/DC, base-mount, metallic base, Red, Green, Yellow, and White lenses LT1K-554-GSRGR Flashing/non-flashing LED, 5 tier, 120V AC, pole-mount, metallic base, Green, Blue, Red, Green, and Red lenses C-6 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Display Lights LT1 Series SignaLightTM Part Numbers (sub-assembled) Frame = Lenses Lamps Part Numbers: Sub-Assemblies Part No. Description Complete Part Top Cap Notes Examples C =Type Frame Display Lights LT1-01* A = Incandescent, non-flashing D = Incandescent, flashing/non-flashing H = LED, non-flashing K = LED, flashing/non-flashing = Number of tiers (1-5) = Lamp voltage 1 = 12V AC/DC 2 = 24V AC/DC 5 = 120V AC 8 = 240V AC * = Frame cover (M = metallic, P = beige) LT1A-0142M = Steady light, four tiers, 24V AC/DC, metallic base LT1D-0125P = Flashing light, two tiers, 120V AC, plastic base Lens LT1X-08* LED Lamps 12V AC/DC Incandescent Lamps * = Color: R = Red, Y = Yellow, G = Green, S = Blue, W = White LTXD-1* 24V AC/DC LTXD-2* 120V AC LTXD-120* 12V AC/DC B5-2 30V AC/DC B5-31 120V AC B5-1 240V AC B5-4 LT1X-08G = Green lens LTXD-1R = Red LED, 12V AC/DC * = Color: R = Red, Y = Yellow, G = Green, S = Blue, W = White LTXD-2S = Blue LED, 24V AC/DC LTXD-120Y = Yellow LED, 120VAC Top cap LT1X-06 Mounting pole (optional) LT1Z-10 Bill of Materials Quantities Description Quantity Body frame Required: 1 per unit Lens(es) Variable: from 1 - 5 Top cap Required: 1 per unit Lamps Variable: from 1 - 5 Mounting pole Optional: 1 per unit www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC C-7 Display Lights LT1 Series SignaLightTM Accessories Lens/LED Color Code Color Code Part Numbers: Accessories/Replacement Parts Description Part No. LED Lamp LTXD-1 12V AC/DC See chart for available colors LTXD-2 24V AC/DC See chart for available colors LTXD-120 120V AC See chart for available colors B5-2 12V AC/DC, 5W B5-31 30V, 10W (for use with 24V AC/DC) B5-1 120V AC, 7W B5-4 240V AC, 10W LT1X-08 See chart for available colors LT1X-06 Clear polycarbonate LT1Z-10 Chrome-plated steel supplied with "L" bracket and two M22 x 1.5 hexagonal nuts LT1Z-11 Aluminum fixture for mounting polemounted units to horizontal surface; not included with assembled SignaLight units LT1Z-NPT50 1/2" NPT pole adaptor; not included with assembled SignaLight units LT1Z-NPT75 3/4" NPT pole adaptor; not included with assembled SignaLight units Display Lights C Incandescent Lamp Remarks Amber A Green G Red R Blue S White W Yellow Y Lens Top Cover Mounting Pole Pole Mounting Fixture NPT Pole Adaptors In place of specify lens/LED color code from chart at right. C-8 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC Display Lights LT1 Series SignaLightTM Wiring 5 External Contact Connections Wiring is color-coded to match the number of tiers. 1 tier = R 2 tier = RY 3 tier = RYB 4 tier = RYBS 5 tier = RYBSW 4 3 2 Color Codes: R = Red Y = Yellow B = Brown S = Blue W = White 1 C Display Lights AC/DC Common Cable = (White) LT1A/LT1H: Non-Flash Series LT1D/LT1K: Flash/Non-Flash Series SignaLight Dimensions Assembled Base Mount Assembled Pole Mount 2.20" (o56mm) 2.20" (o56mm) Mounting Hole Layout: Base Mounting Style 0.12" - 0.197" (3 - o5mm) 1 2 0 0 0.787" (20mm) 0.787" (20mm) 2.56" (65mm) 0.394" (10mm) 2.36" (60mm) www.idec.com L1 1 6.7" (170mm) 2 9.4" (1240mm) 3 12.2" (310mm) 4 15.0" (380mm) 5 17.7" (450mm) 3.15" (80mm) 1.57" (40mm) Number of Tiers 10.75" (273mm) 0.866" (22mm) 0.875" Cord Hole 0.39" (o10mm) 120 12 L1 2.75" (70mm) L1 2.75" (70mm) 1.57" (o40mm) USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC C-9 Display Lights LT1 Series SignaLight Dimensions, continued Adapter LT1Z-NPT75 LT1Z-NPT50 1.00" (25mm) 1.17" (30mm) NPT50 NPT50 M22 x 1.5 threads M22 x 1.5 threads C Display Lights 1.47" (37mm) 1.63" (41mm) 3/4" NPT threads 1/2" NPT threads Mounting Pole (LT1Z-10) Optional Pole Mounting Base: Side View (LT1Z-11) o1.6" (47mm) 2.4" (60mm) 0.8" (20mm) 2-o0.2" (5mm) 1.2" 1.4" (30mm) (35mm) o0.9" (22mm) 2-0.2" x 0.3" (4.5 x 8mm) 0.5" (13mm) 2.4" (60mm) 2-o11mm 1.6" (40mm) 1.3" (32mm) o2.9" (73mm) 10.7" (273mm) Mounting Bracket (provided with mounting pole) 3.2" (80mm) Optional Pole Mounting Base: Bottom View 0.875" (22mm) Pole Length 11.8" (300mm) 3.9" (100mm) 2-M0.2" x 0.4" (M4 x 10mm) C-10 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada (888) 317-IDEC