RJSAE
58
Amphenol Commercial Products - Amphenol Canada Corp. | Telephone: (416) 291-4401 | Fax: (416) 754-8668 | Email: sales@amphenolcanada.com
All specications are subject to change without notice. Catalogue is updated regularly. Please refer to www.amphenolcanada.com for the most recent edition.
ORDERING INFORMATION
Didn’t nd what you were looking for?
Please contact sales@amphenolcanada.com and let us know what you need.
RJSAE
Version
5 - 8 Positions, 50µ” gold plating
7 - 6 Positions, 50µ” gold plating
8 - 8 Positions over 6, 50µ” gold plating
X XX
Shield Options
0 - No shield
2 - Shield with top and side tabs, with lter
3 - Shield with top and side tabs, no lter
F - Shield without top and side tabs
XX
LED Options
Please refer to page 79 for options
X
Number of Contacts
4 - 4 Contacts
6 - 6 Contacts
8 - 8 Contacts
- - X X
Number of Ports
2 - 2 Ports (1 over 1)
4 - 4 Ports (2 over 2)
8 - 8 Ports (4 over 4)
Contact Length
0 - Standard 0.1” (2.54mm)
A - 0.130” (3.30mm)
B - 0.138” (3.51mm)
T2, 4 AND 8 PORTS WITH LED AND SHIELD OPTIONS
The RJSAE is a RJ45 stackable connector that reduces component and labor costs by
incorporating LEDs. Its stackable feature enables more ports with the same board space.
With superior EMI performance, the option of conguring your connector with a Ferrite
Filter is available to further reduce crosstalk in noisy applications. A variety of LED
combinations, port congurations and shielded and unshielded options also available.
SPECIFICATIONS
Electrical
Insertion Force: 5 lbs max.
Pull Retention Force: 20 lbs min.
Durability: 750 mating & unmating cycles
Redcommended
Soldering Temperature: Wave soldering peaked at 260
°C for 5 secs max.
Operating Temperature: -55
°C to + 85°C
UL File #: E135615
CSA File #: 150190
*Note: Connectors without LEDs are suitable for IR Reow;
Connectors with Reow LEDs avilable
Contact resistance: 20 mΩ max.
Insulation resistance: 500 MΩ min. at 500V DC for 2 mins max.
Current Rating: 1.5 Amps per contact
Voltage Rating: 125 Volts AC
DWV: Contact to contact: 1000 VAC, 60 Hz. 1 min.
Contact to shield: 1500 VAC, 60 Hz. 1 min.
LED Forward DC Current: 20mA typical
LED Forward Voltage: 1.9 Volts max. at 2mA (for single colours)
2.6 Volts max. at 2mA (for bicolours)
LED Reverse Voltage: 5 Volts min.
LED Light Intensity: 0.4 to 1.5 mcd min. at 2mA (for single
colours)
0.5 mcd min. at 2mA (for bicolours)
LED Wave Length: Yellow: 587 ± 7 nm measured at 20mA
Green: 565 ± 6 nm measured at 20mA
Red: 625 ± 5 nm measured at 20mA
Insulator: High temp. thermoplastic;
Complies with UL 94V-0; Black
Contacts: Phosphor bronze hard temper with gold
thickness options (6µ”, 15µ”, 30µ”, 50µ”) over
50µ” min. nickel on contact mating area;
100µ” min. matte tin plating on soldering tail
Shield: Copper alloy; nickel plated or stainless steel
with tin dipped tail (as specicied in drawing)
LED: Tin plating on LED tail
Click to Return to Table of Contents