F-219 (Rev 22AUG19) ET60T-D04-3-08-A04-S-R1-S RIGHT-ANGLE POWER/SIGNAL HEADER Mates with: ET60S POWER POSITIONS (LEFT) ET60T ROWS SIGNAL POSITIONS SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?ET60T -0 -AXX = AC Power Positions (-02, -03, -04, -05, -06) Insulator Material: Black LCP Terminal Material: Signal: Phosphor Bronze Power: Copper Alloy Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating: Power: 60 A per blade (2 pins powered) Signal: 2.8 A per pin (6 pins powered) Operating Temp Range: -40 C to +105 C Voltage Rating: 280 VAC RoHS Compliant: Yes = No Signal -3 -DXX = DC Power Positions (-02, -03, -04, -05, -06, -07, -08, -09, -10) -08 = 3 Rows = 3 Row only -5 -01, -02, -03, -04, -05, -06, -07, -08 = 5 Rows = 5 Row only -SXX* = Split Power -000 Note: -SXX* & -T* are Preliminary = No Power B (2.54) .100 A C (10.00) .394 PROCESSING Lead-Free Solderable: Yes A + B + C + (26.98) 1.062 (2.84) .112 RECOGNITIONS (0.64) .025 SQ A + B + C + (33.98) 1.338 (7.50) .295 (1.27) .050 (5.50) .217 For complete scope of recognitions see www.samtec.com/quality (10.00) .394 (2.50) .098 FILE NO. E111594 (29.25) 1.152 (9.40) .370 CREEPAGE AND CLEARANCE (5.00) .197 (5.17) .204 (3.00) .118 (4.81) .189 (3.00) .118 ET60T-D03-3-08-A03-X-R1-S (2.00) .079 A Selectively loading contacts achieves customer specific creepage and clearance requirements. Contact asp@samtec.com -00 = No Signal (5.50) .217 (24.90 .980 (3.33) .1131 DIA D C (10.00) .394 A + D + C + (27.21) 1.071 (0.64) .025 SQ A + D + C + (34.21 ) 1.347 (5.50) .217 (1.27) .050 Notes: Some lengths, styles and options are non-standard, non-returnable. EXTreme Ten60PowerTM is a trademark of Molex Incorporated and is dual sourced by Molex(R) (24.45) .963 (5.50) .217 (5.64) .222 (4.57) .180 ET60T-D04-5-03-A04-X-R1-S Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. ET60T-D04-3-08-A04-L-R1-T ET60T-D04-5-03-A04-L-R1-S ET60T SERIES ET60T-D04-3-08-000-S-R1-S POWER POSITIONS (RIGHT) -AXX PLATING -L = AC Power Positions (-02, -03, -04, -05, -06) -S = DC Power Positions (-02, -03, -04, -05, -06, -07, -08, -09, -10) GUIDE POST -R1 (Required callout) = Right-angle Through-hole (Use with (1.60 mm) .062" thick card) = 10 " (0.25 m) Gold on contact, Matte Tin on tail (Not available for 5 rows) -DXX TAIL = 30 " (0.76 m) Gold on contact, Matte Tin on tail OPTION = Side Guide Post -T* = Top Guide Post -SXX* = Split Power -000 = No Power Note: -SXX* & -T* are Preliminary A + D + C + (11.47) .452 A POWER POWER POSITIONS POSITIONS DC (LEFT) (RIGHT) POWER -02 -02 -03 -03 -04 -04 -05 -05 -06 -06 -07 -07 -08 -08 -09 -09 -10 -10 SIGNAL POSITIONS PER ROW (3 Row) B (5.50) .217 (11.00) .433 (16.50) .650 (22.00) .866 (27.50) 1.083 (33.00) 1.299 (38.50) 1.516 (44.00) 1.732 (49.50) 1.949 -08 (0.64) .025 SQ ET60T-D04-5-03-A04-X-R1-T C A A + C + (21.50) .846 (2.00) .079 (4.00) .157 (6.00) .236 (8.00) .315 (10.00) .394 (12.00) .472 (14.00) .551 -08 C A + D + C + (19.71) .776 N/A -02 -07 A N/A N/A -06 (14.98) .590 N/A -01 -05 D N/A D -04 (2.00) .079 (7.50) .295 (15.00) .591 (22.50) .886 (30.00) 1.181 (37.50) 1.476 SIGNAL POSITIONS PER ROW (5 Row) -03 (17.78) .700 C AC POWER A + C + (28.50) 1.122 (1.27) .050 (5.50) .217 (3.33) .1131 DIA (5.50) .217 (4.50) .177 (5.50) .217 ET60T-D04-0-00-A04-X-R1-S Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. -H = Hot Swap (Leave blank for no Hot Swap -S (29.25) 1.152