Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N Elektrische Eigenschften / Electrical properties Hochstzulassige Werte / Maximum rated values Periodische Vorwarts- und Ruckwarts-Spitzensperrspannung repetitive peak forward off-state and reverse voltages T vj = - 40C...Tvj max VDRM , VRRM 2000 2400 2200 2600 2800 V V V Vorwarts-Stospitzensperrspannung non-repetitive peak foward off-state voltage T vj = - 40C...Tvj max VDSM 2000 2400 2200 2600 2800 V V V Ruckwarts-Stospitzensperrspannung non-repetitive peak reverse voltage T vj = + 25C...Tvj max VRSM 2100 2500 2300 2700 2900 V V V 2625 A Durchlastrom-Grenzeffektivwert RMSM on-state current Dauergrenzstrom average on-state current Stostrom-Grenzwert surge current ITRSMSM T C = 85 C T C = 61 C ITAVM 1220 1670,9 A A T vj = 25C, tp = 10 ms ITSM 25000 22500 A A T vj = Tvj max, tp = 10 ms Grenzlastintegral It-value T vj = Tvj max, tp = 10ms Kritische Stromsteilheit critical rate of rise of on-state current f=50 Hz, vL = 10V, iGM = 1 A It T vj = 25C, tp = 10ms DIN IEC 747-6 3125 2531 As*10 As*10 (diT/dt)cr 150 A/s (dvD/dt)cr 1000 V/s 2,13 1,38 V V 1 V diG/dt = 1 A/s Kritische Spannungssteilheit critical rate of rise of off-state voltage T vj = Tvj max, vD = 0,67 VDRM 5.Kennbuchstabe / 5th letter F Charakteristische Werte / Characteristic values Durchlaspannung on-state voltage Tvj = Tvj max, iT = 3,50 kA Tvj = Tvj max, iT = 1 kA vT vT Schleusenspannung threshold voltage T vj = Tvj max VT(TO) Ersatzwiderstand slope resistance T vj = Tvj max rT Durchlakennlinie on-state voltage T vj = Tvj max vT = A + B x iT + C x ln (iT + 1) + D x iT max. max. 0,2750 m mA A= 0,9686992 B= 2,17E-04 C= -0,0096522 D= 8,13E-03 Zundstrom gate trigger current T vj = 25C, vD = 6 V IGT max. 250 Zundspannung gate trigger voltage T vj = 25C, vD = 6V VGT max. 2 Nicht zundener Steuerstrom gate non-trigger current T vj = Tvj max, vD = 6 V IGD max. max. 10 5 mA mA Nicht zundene Steuerspannung gate non-trigger voltage T vj = Tvj max,vD = 0,5 VDRM VGD max. 0,25 mV Haltestrom holding current T vj = 25C, vD = 6 V, RA = 5 IH max. 500 mA Einraststrom latching current T vj = 25C, vD = 6 V, RGK>= 10 IL max. 2500 mA iD, iR max. 200 mA tgd max. 4,5 s T vj = Tvj max,vD = 0,5 VDRM V iGM = 1 A, diG/dt = 1 A/s tg = 20 s Vorwarts- und Ruckwarts-Sperrstrom forward off-state and reverse currents T vj = Tvj max Zundverzug gate controlled delay time DIN IEC 747-6 vD = VDRM, vR = VRRM T vj = 25C iGM = 1 A, diG/dt = 1 A/s BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Seite/page 1 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N Elektrische Eigenschften / Electrical properties Charakteristische Werte / Characteristic values Freiwerdezeit circuit commutatet turn-off time T vj = Tvj max, iTM=ITAVM tq vRM =100V, vDM = 0,67 VDRM dvD/dt = 20 V/s, -diT/dt = 10 A/s typ. 4. Kennbuchstabe / 4th letter O 350 s Thermische Eigenschaften / Thermal properties Innerer Warmewiderstand thermal resitance, junction to case Kuhlflache / cooling surface beidseitig / two-sided, =180sin RthJC beidseitig / two-sided, DC Anode / anode, =180sin Anode / anode, DC Kathode / cathode, =180sin Kathode / cathode, DC Ubergangs- Warmewiderstand thermal resitance, case to heatsink Kuhlflache / cooling surface max. max. max. max. max. max. 0,0184 0,0170 0,0344 0,0330 0,0364 0,0350 C/W C/W C/W C/W C/W C/W max. max. 0,0035 0,0070 C/W C/W RthJK beidseitig / two-sided einseitig / single-sided Hochstzulassige Sperrschichttemperatur max. junction temperature T vj max Betriebstemperatur operating temperature T c op Lagertemperatur storage temperature T stg 125 -40,,,+125 -40,,,+150 C C C Mechanische Eigenschaften / Mechanical properties Gehause, siehe Anlage case, see appendix Si-Element mit Druckkontakt Si-pellet with pressure contact Seite 3 page 3 Anprekraft clamping force F Gewicht weight G 20...45 typ. 540 Kriechstrecke creepage distance 32 Feuchteklasse humidity classification DIN 40040 Schwingfestigkeit vibration resistance f = 50Hz A 07/00 g mm C 50 Mit dieser technischen Information werden Halbleiterbauelemente spezifiziert, jedoch keine Eigenschaften zugesichert. Sie gilt in Verbindung mit den zugehorigen Technischen Erlauterungen./ The technical Information specifies semiconductors devices but promises no characteristics. It is valid in combination with the belonging technical notes. BIP-AM / 00-04-14, K.-A.Ruther kN Seite/page 2 m/s Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor BIP-AM / 00-04-14, K.-A.Ruther T 1219 N 20...28 A 07/00 Zn. Nr.: 1 N Seite/page 3 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N Kuhlung Analytische Elemente des transienten Warmewiderstandes ZthJC fur DC cooling Analytical ementes of transient thermal impedance ZthJC for DC Pos.n 1 2 3 4 5 6 beidseitig Rthn [C/W] 0,000220 0,000000 0,001020 0,002830 0,006080 0,00575 two-sided n [s] 0,001360 0,003060 0,013900 0,066200 0,512000 1,490 anodenseitig Rthn [C/W] 0,000650 0,001900 0,002390 0,003810 0,004250 0,02000 anode-sided n [s] 0,001600 0,009100 0,079100 0,260000 1,736000 7,210 kathodenseitig Rthn [C/W] 0,000550 0,002060 0,006040 0,005510 0,020840 cathode-sided n [s] 0,001400 0,008570 0,154000 2,580000 7,0070 n max Analytische Funktion / analytical function : ZthJC = Rthn ( 1 - EXP ( - t / n )) n=1 BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Seite/page 4 7 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 6.000 5.000 iT [A] 4.000 3.000 2.000 1.000 0 0,5 1 1,5 2 2,5 3 vT [V] Grenzdurchlakennlinie / Limiting 0n-state characteristic iT = f(vT) Tvj = Tvj max BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 2 Seite/page 5 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 4.000 180 3.500 120 90 3.000 60 = 30 PTAV [A] 2.500 2.000 1.500 1.000 500 0 0 500 1000 1500 2000 ITAV [A] Durchlaverlustleistung / On-state power loss PTAV = f(ITAV) Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 2 Seite/page 5 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 90 60 120 180 20 0 500 1000 1500 2000 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Beidseitige Kuhlung / Two-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 4 Seite/page 7 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 90 120 180 20 0 200 400 600 800 1000 1200 1400 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Anodenseitige Kuhlung / anode sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 5 Seite/page 8 1600 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 90 800 1000 120 180 20 0 200 400 600 1200 1400 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Kathodenseitige Kuhlung / cathode sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 6 Seite/page 9 1600 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TA [C] 100 80 60 90 120 180 40 60 = 20 0 50 100 150 200 250 300 ITAVM [A] Hochstzulassige Kuhlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Luftselbstkuhlung / Natural air-cooling Kuhlkorper/Heatsink. K0.05F Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 7 Seite/page 10 350 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TA [C] 100 80 60 40 = 30 60 90 120 180 20 0 200 400 600 800 1000 ITAVM [A] Hochstzulassige Kuhlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Verstarkte Luftkuhlung / Forced air-cooling Kuhlkorper/Heatsink. K0.05F,TA = 35 C, VL = 120 l/s Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 8 Seite/page 11 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 4.500 DC 4.000 180 120 3.500 90 60 3.000 = 30 30 PTAV [W] 2.500 2.000 1.500 1.000 500 0 0 500 1000 1500 2000 2500 ITAV [A] Durchlaverlustleistung / On-state power loss PTAV = f(ITAV) Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 9 Seite/page 12 3000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 90 120 DC 180 20 0 500 1000 1500 2000 2500 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Beidseitige Kuhlung / Two-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 10 Seite/page 13 3000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 90 120 180 DC 20 0 200 400 600 800 1000 1200 1400 1600 1800 2000 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Anodenseitige Kuhlung / anode sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 11 Seite/page 14 2200 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TC [C] 100 80 60 40 = 30 60 180 90 120 DC 20 0 1000 2000 ITAVM [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Kathodenseitige Kuhlung / cathode sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 12 Seite/page 15 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TA [C] 100 80 60 90 120 180 40 DC = 30 60 20 0 100 200 300 400 ITAVM [A] Hochstzulassige Kuhlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Luftselbstkuhlung / Natural air-cooling Kuhlkorper/Heatsink. K0.05 F Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 13 Seite/page 16 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 140 120 TA [C] 100 80 60 120 180 40 = 30 60 90 DC 20 0 200 400 600 800 1000 ITAVM [A] Hochstzulassige Kuhlmitteltemperatur / Max. allowable cooling medium temperature TA = f (ITAVM) Verstarkte Luftkuhlung / Forced air-cooling Kuhlkorper/Heatsink. K0.05F, VL = 120 l/s Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 14 Seite/page 17 1200 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 100.000 I TAV (vor) = 0A 100 A 170 A 210 A 235 A 250 A 20.00 10.000 8.000 I T (OV) [A] 6.000 4.000 2.00 1.000 800 100 0,01 0,1 1 10 100 1000 t [s] Uberstrom / Overload on-state current IT(OV) = f(t) Beidseitige Luftselbstkuhlung / Two-sided natural cooling K0.05F TA = 45C Parameter: Vorlaststrom / pre-load current ITAV(vor) BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 15 Seite/page 18 10000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 100.000 40.00 0 I T (OV) [A] 20.000 00 I TAV (vor)] = 0A 200 A 300 A 380 A 430 A 470 A 10.000 8.00 6.000 4.000 2.000 1.000 0,01 0,1 1 10 100 1000 t [s] Uberstrom / Overload on-state current IT(OV) = f(t) Beidseitige verstarkte Kuhlung / forced two-sided cooling K0.05F TA = 35C, VL = 120 l/s Parameter: Vorlaststrom / pre-load current ITAV(vor) BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 16 Seite/page 19 10000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 5000 N 5000 20 s ITAV(vor) [A]=250 210 100 4s I TINT [A], I TAV(vor) = 0 4000 4000 2350 1 min 3000 1700 0 1s 3000 4 min 0,4 s 2000 2000 SD=0,1 s SD ED 1000 2h 1000 40 min 10 min 0 0 0 0,1 1 10 ED [%] 1000 2000 100 3000 ITINT [A] 4000 I TAV(vor) 5000 Hochstzul. Durchlastrom bei Ausetzbetrieb / Max. allowable on-state current during intermittent operation ITINT = f(ED) Beidseitig Luftselbstkuhlung / two-sided natural cooling K 0.048F TA = 45 C Parameter: Vorlaststrom / pre-load current ITAV(vor) , Spieldauer / cycle duration SD 5000 5000 4s 20 s ITAV(vor) [A]=750 700 1s 4000 I TINT [A], I TAV(vor) = 0 6200 500 0 4000 1 min 350 0 0,4 s 3000 3000 4 min SD=0,1s 2000 2000 SD ED 1000 1000 2h I TINT I TAV(vor) 40 min 10 min 0 0,1 0 1 10 100 0 1000 2000 ED [%] 3000 4000 ITINT [A] Hochstzul. Durchlastrom bei Ausetzbetrieb / Max. allowable on-state current during intermittent operation ITINT = f(ED) Beidseitig verstarkte Kuhlung / forced two-sided cooling K 0.048F TA = 35 C, VL = 120 l/s Parameter: Vorlaststrom / pre-load current ITAV(vor) , Spieldauer / cycle duration SD BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 17 Seite/page 20 5000 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 25.000 20.000 a T A = 35 C vL =120l/s I T(OV)M [A] 15.000 b 10.000 T A = 45 C 5.000 0 0,01 0,1 1 10 t [s] Grenzstrom / Max. overload on-state current IT(OV)M = f(t), vRM = 0,8 VRRM Beidseitige Kuhlung / Two-sided cooling Kuhlkorper / Heatsink: K 0.05F Belastung aus / Surge current occurs: a - Leerlauf / No-load conditions b - Betrieb mit Dauergrenzstrom / During operation at max. average on-state current ITAVM BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z. Nr.: 18 Seite/page 21 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 101 8 c 6 b 4 vG [V] a 3 2 100 8 6 4 3 2 10-1 1 10 2 3 4 5 6 8 102 2 3 4 5 6 8 103 2 3 4 5 6 iG [mA] Steuercharakteristik vG = f (iG) mit Zundbereichen fur VD = 6 V Gate characteristic vG = f (iG) with triggering area for VD = 6 V Hochstzulassige Spitzensteuerverlustleistung / Maximum rated peak gate power disspation PGM = f (tg) : a - 40 W/10ms b - 80 W/1ms c - 100 W/0,5ms d - 150 W/0,1ms BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 19 Seite/page 22 8 104 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 103 5 2 2 a Tgd 10 [s] 5 2 1 10 b 5 2 0 10 5 2 -1 10 101 2 3 4 5 6 8102 2 3 4 5 6 8103 2 3 4 5 6 8104 iG [mA] Zundverzug / Gate controlled delay time tgd = f(iGM) Tvj = 25C, diG/dt = iGM/1s a - maximaler Verlauf / limiting characteristic b - typischer Verlauf / typical characteristic BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 20 Seite/page 23 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 10000 iTM = 9.000 8.000 2000A 7.000 1000A 6.000 500A 5.000 200A 500A 4.000 Qr [As] 100A 3.000 50A 2.000 20A 1000 1 10 100 -di/dt [A/s] Sperrverzogerungsladung / Recovered charge Qr = f(di/dt) Tvj = Tvj max, vR = 0,5 VRRM, v RM = 0,8 VRRM Parameter: Durchlastrom / On-state current iTM BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Zn. Nr.: 21 Seite/page 24 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N = 0,025 30 60 0,020 90 120 180 Z (th) JC [C/W] 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Beidseitige Kuhlung /Ttwo-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 22 Seite/page 25 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N = 0,040 30 90 60 120 180 Z (th) JC [C/W] 0,030 0,020 0,010 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Anodenseitige Kuhlung / Anode-sided sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 23 Seite/page 26 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 0,045 = 30 0,040 60 90 120 180 0,035 Z (th) JC [C/W] 0,030 0,025 0,020 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Kathodenseitige Kuhlung / Cathde-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 24 Seite/page 27 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N = 30 0,025 60 90 120 0,020 180 DC Z (th) JC [C/W] 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Beidseitige Kuhlung / Two-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 25 Seite/page 28 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 0,045 = 30 0,040 60 90 120 180 0,035 DC Z (th) JC [C/W] 0,030 0,025 0,020 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Anodenseitige Kuhlung / Anode-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 26 Seite/page 29 Technische Information / Technical Information Netz-Thyristor Phase Control Thyristor T 1219 N 20...28 N 0,045 = 30 60 90 120 0,040 180 DC 0,035 Z (th) JC [C/W] 0,030 0,025 0,020 0,015 0,010 0,005 0,000 0,001 0,01 0,1 1 10 100 t [s] Transienter innerer Warmewiderstand / Transient thermal impedance Z(th)JC = f(t) Kathodenseitige Kuhlung / Cathode-sided cooling Parameter: Stromfluwinkel / current conduction angle BIP-AM / 00-04-14, K.-A.Ruther A 07/00 Z.Nr.: 27 Seite/page 30