SMD Wire-wound Chip Inductors CT0805HS Series From 2.2 nH to 2700 nH Not shown at actual size. Characteristics Operating Temperature: -40C to +125C Inductance Tolerance: 2%, 5%, 10%, 20% Material: Ceramic wire-wound core Packaging: Tape & Reel, 2,000 parts per reel Solderability: Wave & Reflow soldering Testing: Tested on a HP4286A with a SMD-A test fixture Coated: Epoxy resin on top of the part to permanently set the coil Additional Information: Parts are also available with a clear plastic cap. Additional values available upon request www.ctparts.com Ordering Info Please specify tolerance code when ordering. CT0805HS-120_ G = 2%, J = 5%, K = 10%, M = 20% Central Tech Part Number Inductance (nH) L Test Freq. (MHz) Q Fact. Min. CT0805HS-020_ CT0805HS-030_ CT0805HS-060_ CT0805HS-080_ 2.2 3.3 6.8 8.2 250 250 250 250 50 40 55 52 CT0805HS-120_ CT0805HS-150_ CT0805HS-180_ CT0805HS-220_ CT0805HS-270_ CT0805HS-330_ CT0805HS-390_ CT0805HS-470_ CT0805HS-560_ CT0805HS-680_ CT0805HS-820_ 12 15 18 22 27 33 39 47 56 68 82 250 250 250 250 250 250 250 200 200 200 150 CT0805HS-101_ CT0805HS-121_ CT0805HS-151_ CT0805HS-181_ CT0805HS-221_ CT0805HS-271_ CT0805HS-331_ CT0805HS-311_ CT0805HS-471_ CT0805HS-561_ CT0805HS-681_ CT0805HS-821_ CT0805HS-911_ 100 120 150 180 220 270 330 390 470 560 680 820 910 CT0805HS-102_ CT0805HS-122_ CT0805HS-152_ CT0805HS-182_ CT0805HS-222_ CT0805HS-272_ 1000 1200 1500 1800 2200 2700 Q Test Freq. (MHz) SRF Min. (MHz) DCR Max. ) ( Rated DC (mA) 1500 1500 1000 1000 >6000 >6000 5500 4700 .07 .12 .10 .14 600 600 600 600 50 52 56 58 58 62 62 60 62 62 62 500 500 500 500 500 500 500 500 500 500 500 4000 3400 3300 2600 2500 2050 2000 1650 1550 1450 1300 .13 .15 .19 .15 .22 .22 .25 .28 .30 .36 .38 600 600 600 600 500 500 500 500 500 500 400 150 150 100 100 100 100 100 100 50 25 25 25 25 60 50 50 48 50 48 48 48 30 26 24 20 18 500 250 250 250 250 250 250 250 100 50 50 50 50 1200 1100 920 890 850 800 790 450 380 340 260 220 160 .40 .45 .55 .64 .80 1.0 1.5 1.7 1.7 1.9 2.1 2.1 2.2 400 400 400 400 400 340 300 270 250 230 230 230 190 7.9 7.9 7.9 7.9 7.9 7.9 18 18 16 16 16 16 50 25 25 7.9 7.9 7.9 140 120 100 80 60 50 2.3 2.3 2.4 2.5 2.7 2.9 180 180 170 170 160 150 Pad Layout 5/16/00 (c) Volume Manufacturer of Quality Inductors, Chokes & Coils 20 For more information contact our distributor: Inductors Inc., 5 Technology Drive, Irvine, CA 92618 Inside US 800-533-8295 Outside US 949-623-2460 Fax 949-623-1401 SMD Wire-wound Chip Inductors www.ctparts.com Physical Dimensions Size mm inches A Max. B Max. C Max. D E F 2.20 1.64 1.35 1.27 0.50 1.03 0.086 0.068 0.053 0.050 0.020 0.040 For more information contact our distributor: Inductors Inc., 5 Technology Drive, Irvine, CA 92618 Inside US 800-533-8295 Outside US 949-623-2460 Fax 949-623-1401 21 CT0805HS Series Notes (c) Volume Manufacturer of Quality Inductors, Chokes & Coils 5/16/00