©2009 Fairchild Semiconductor Corporation 1www.fairchildsemi.com
FDP44N25 / FDPF44N25T Rev. B
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
March 2009
UniFET
TM
FDP44N25 / FDPF44N25T
250V N-Channel MOSFET
Features
• 44A, 250V, RDS(on) = 0.069Ω @VGS = 10 V
• Low gate charge ( typical 47 nC)
• Low Crss ( typical 60 pF)
•Fast switching
•Improved dv/dt capability
Description
These N-Channel enhancement mode power field effect
transistors are produced using Fairchild’s proprietary, planar
stripe, DMOS technology.
This advanced technology has been especially tailored to
minimize on-state resistance, provide superior switching
performance, and withstand high energy pulse in the ava lanche
and commutation mode. These devices are well suited fo r high
efficient switched mode power supplies and active power factor
correction.
Absolute Maximum Ratings
*Drain current limited by maximum junction temperature
Thermal Characteristics
TO-220
FDP Series
GS
DTO-220F
FDPF Series
GS
D
D
G
S
Symbol Parameter FDP44N25 FDPF44N25T Unit
VDSS Drain-Source Voltage 250 V
IDDrain Current - Continuous (TC = 25°C)
- Continuous (TC = 100°C) 44
26.4 44*
26.4* A
A
IDM Drain Current - Pulsed (Note 1) 176 176* A
VGSS Gate-Source voltage ± 30 V
EAS Single Pulsed Avalanche Energy (Note 2) 2055 mJ
IAR Avalanche Current (Note 1) 44 A
EAR Repetitive Avalanche Energy (Note 1) 30.7 mJ
dv/dt Peak Diode Recovery dv/dt (Note 3) 4.5 V/ns
PDPower Dissipation (TC = 25°C)
- Derate above 25°C307
2.45 38
0.3 W
W/°C
TJ, TSTG Operating and Storage Temperature Range -55 to +150 °C
TLMaximum Lead Temperature for Soldering Purpose,
1/8” from Case for 5 Seconds 300 °C
Symbol Parameter FDP44N25 FDPF44N25T Unit
RθJC Thermal Resistance, Junction-to-Case 0.41 3.3 °C/W
RθCS Thermal Resistance, Case-to-Sink Typ. 0.5 -- °C/W
RθJA Thermal Resistance, Junction-to-Ambient 62.5 62.5 °C/W
2www.fairchildsemi.com
FDP44N25 / FDPF44N25T Rev. B
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
Package Marking and Ordering Information
Electrical Characteristics TC = 25°C unless otherwise noted
Notes:
1. Repetitive Rating: Pulse wi dth limited by maximum junction temperature
2. L = 1.7mH, IAS = 44A, VDD = 50V, RG = 25Ω, Starting TJ = 25°C
3. ISD ≤ 44A, di/dt ≤ 200A/μs, VDD ≤ BVDSS, Starting TJ = 25°C
4. Pulse Test: Pulse width ≤ 300μs, Duty Cycle ≤ 2%
5. Essentially Independent of Operating Temperature Typical Characteristics
Device Marking Device Package Reel Size Tape Width Quantity
FDP44N25 FDP44N25 TO-220 - - 50
FDPF44N25T FDPF44N25T TO-220F - - 50
Symbol Parameter Conditions Min Typ Max Units
Off Characteristics
BVDSS Drain-Source Breakdown Voltage VGS = 0V, ID = 250μA, TJ = 25°C250 -- -- V
ΔBVDSS
/ ΔTJ
Breakdown Voltage Temperature
Coefficient ID = 250μA, Referenced to 25°C-- 0.25 -- V/°C
IDSS Zero Gate Voltage Drain Current VDS = 250V, VGS = 0V
VDS = 200V, TC = 125°C--
-- --
-- 1
10 μA
μA
IGSSF Gate-Body Leakage Current, Forward VGS = 30V, VDS = 0V -- -- 100 nA
IGSSR Gate-Body Leakage Current, Reverse VGS = -30V, VDS = 0V -- -- -100 nA
On Characteristics
VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250μA3.0 -- 5.0 V
RDS(on) Static Drain-Source
On-Resistance VGS = 10V, ID = 22A -- 0.058 0.069 Ω
gFS Forward Transconductance VDS = 40V, ID = 22A (N ote 4) -- 32 -- S
Dynamic Characteristics
Ciss Input Capacitance VDS = 25V, VGS = 0V,
f = 1.0MHz -- 2210 2870 pF
Coss Output Capacitance -- 450 585 pF
Crss Reverse Transfer Capacitance -- 60 90 pF
Switching Characteristics
td(on) Turn-On Delay Ti me VDD = 125V, ID = 44A
RG = 25Ω
(Note 4, 5)
-- 53 117 ns
trTurn-On Rise Time -- 402 814 ns
td(off) Turn-Off Delay Time -- 85 179 ns
tfTurn-Off Fall Time -- 112 234 ns
QgTotal Gate Charge VDS = 200V, ID = 44A
VGS = 10V
(Note 4, 5)
-- 47 61 nC
Qgs Gate-Source Charge -- 18 -- nC
Qgd Gate-Drain Charge -- 24 -- nC
Drain-Source Diode Characteristics and Maximum Ratings
ISMaximum Continuous Drain-Source Diode Forward Current -- -- 44 A
ISM Maximum Pulsed Drain-Source Diode Forward Current -- -- 176 A
VSD Drain-Source Diode Forward Voltage VGS = 0V, IS = 44A -- -- 1.4 V
trr Reverse Recovery Time VGS = 0V, IS = 44A
dIF/dt =100A/μs (Note 4) -- 195 -- ns
Qrr Reverse Recovery Charge -- 1.8 -- μC
3www.fairchildsemi.com
FDP44N25 / FDPF44N25T Rev. B
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
Typical Performance Characteristics
Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics
Figure 3. On-Resistance Variation vs. Figure 4. Body Diode Forward Voltage
Drain Current and Gate Voltage Variation vs. Source Current
and Temperatue
Figure 5. Capacitance Characteristics Figure 6. Gate Charge Characteristics
24681012
100
101
102
150oC
25oC
-55oC
* Notes :
1. VDS = 40V
2. 250 μs Pulse Test
ID, Drain Current [A]
VGS, Gate-Source Voltage [V]
10-1 100101
100
101
102 VGS
Top : 15.0 V
10.0 V
8.0 V
7.0 V
6.5 V
6.0 V
Bottom : 5.5 V
* Notes :
1. 250μs Pulse Test
2. TC = 25oC
ID, Drain Current [A]
VDS, Drain-Source Voltage [V]
0 25 50 75 100 125 150
0.04
0.06
0.08
0.10
VGS = 20V
VGS = 10V
* N o te : T J = 25oC
RDS(ON) [Ω],
Drain-Source On-Resist ance
ID, Drain Current [A]
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
100
101
102
150oC
* Notes :
1. VGS = 0V
2. 25 0 μs Pulse Test
25oC
IDR, Reverse Drain Current [A]
VSD, So u rc e -Drain v o l ta ge [V]
10-1 100101
0
1000
2000
3000
4000
5000
6000 Ciss = Cgs + Cgd (Cds = shorted)
Coss = Cds + Cgd
Crss = Cgd
* Note :
1. VGS = 0 V
2. f = 1 MHz
Crss
Coss
Ciss
Capacitances [pF]
VDS, Drain-Source Voltage [V]
0 102030405060
0
2
4
6
8
10
12
VDS = 125V
VDS = 50V
VDS = 200V
* Note : ID = 44 A
VGS, Gate-Source Voltage [V]
QG, Tota l G a te C harge [nC]
4www.fairchildsemi.com
FDP44N25 / FDPF44N25T Rev. B
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
Typical Performance Characteristics (Continued)
Figure 7. Breakdown Volt age Variation Figure 8. On-Resistance Variation
vs. Temperature vs. Temperature
Figure 9-1. Maximum Safe Operating Area Figure 9-2. Maximum Safe Operating Area
for FDP44N25 for FDPF44N25
Figure 10. Maximum Drain Current
vs. Case Temperature
-100 -50 0 50 100 150 200
0.0
0.5
1.0
1.5
2.0
2.5
3.0
* Note s :
1. VGS = 10 V
2. ID = 22 A
RDS(ON), (Normali zed)
Drain-Source On-Resistance
TJ, Junction Temperature [oC]
-100 -50 0 50 100 150 200
0.8
0.9
1.0
1.1
1.2
* No te s :
1. VGS = 0 V
2. ID = 250 μA
BVDSS, (N ormalized)
Drain-Source Breakdown Voltage
TJ, Junction Tem perature [oC]
100101102
10-2
10-1
100
101
102
100 ms
1 ms
10 μs
DC
10 ms
100 μs
Operation in This Area
is Limited by R DS(on)
* Note s :
1. TC = 25 oC
2. TJ = 150 oC
3. Single Pulse
ID, Drain Current [A]
VDS, Drain-Source Voltage [V]
25 50 75 100 125 150
0
10
20
30
40
50
ID, Drain Current [A]
TC, Case Temperature [oC]
5www.fairchildsemi.com
FDP44N25 / FDPF44N25T Rev. B
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
Typical Performance Characteristics (Continued)
Figure 11-1. Transient Thermal Respo nse Curve for FDP44N25
Figure 11-2. Transient Thermal Response Curve for FDPF44N25
10-5 10-4 10-3 10-2 10-1 100101
10-2
10-1
* N otes :
1. Z θJC(t) = 0.41 oC/W Max.
2. Du ty Fa c to r , D= t1/t2
3. T JM - TC = PDM * Z θJC(t)
single pulse
D=0.5
0.02
0.2
0.05
0.1
0.01
ZθJC(t), Thermal Response
t1, Square Wave Pulse Duration [sec]
t
1
P
DM
t
2
10-5 10-4 10-3 10-2 10-1 100101
10-2
10-1
100
* Note s :
1. ZθJC(t) = 3.3 0C/W Max.
2. Duty Factor, D = t1/t2
3. TJM - TC = PDM * ZθJC(t)
single pulse
D=0.5
0.02
0.2
0.05
0.1
0.01
ZθJC(t), Thermal Response
t1, Square W ave Pulse Duration [sec]
t
1
P
DM
t
2
6www.fairchildsemi.com
FDP44N25 / FDPF44N25T Rev. B
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
Gate Charge Test Circuit & Waveform
Resistive Switching Test Circuit & Wa veforms
Unclamped Inductive Switching Test Circuit & Waveforms
7www.fairchildsemi.com
FDP44N25 / FDPF44N25T Rev. B
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
Peak Diode Recovery dv/dt Test Circuit & Waveforms
8www.fairchildsemi.com
FDP44N25 / FDPF44N25T Rev. B
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
Mechanical Dimensions
TO-220
Dimensions in Millimeters
9www.fairchildsemi.com
FDP44N25 / FDPF44N25T Rev. B
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
Mechanical Dimensions (Continued)
TO-220F
Dimensions in Millimeters
10 www.fairchildsemi.com10 www.fairchildsemi.com
FDP44N25 / FDPF44N25T 250V N-Channel MOSFET
FDP44N25 / FDPF44N25T Rev. B
Rev. I39
TRADEMARKS
The following include s registered and unreg istered trademarks and se rvice marks, owned by Fairchild Semicon ductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDW IDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEV ICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPO RATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant int o the body or (b) support or sustain lif e,
and (c) whose failure to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonab ly expe cted t o ca use
the failure of the life support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™ *
™
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FlashWriter® *
FPS™
F-PFS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™ e-Series™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW /W /kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™ ®
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TriFault Detect™
TRUECURRENT™*
μSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
tm
®
tm
tm
Datasheet Identification Product Status Definition
Advance Informati on Formative / In Design Datasheet contains the design specifications for product development. Specifications
may change in any manner without notice.
Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later
date. Fairchild Semiconduct or reserves the right to make changes at any time withou t
notice to improve design.
No Identification Needed Full Production Datasheet co ntains final specifications. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild
Semiconductor. The datasheet is for reference information only .
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website,
www.Fairchildsemi.com, under Sales Support.
Counterfeiti ng of semiconductor parts is a growing problem in the in dustry. All manufactur es of semiconductor products are experiencing counte rfeiting of their
parts. Customers who i nadverten tly purchase counterf eit p arts experi ence many pr oblems su ch as lo ss of bra nd reputation, subst andard per for mance, faile d
application, and increased cost of productio n and manuf acturing delays. Fairchild is taking strong measures to protect ourselves and our customers from th e
proliferation of coun terfeit part s. Fairchild stro ngly encourages customers t o purchase Fairchild parts eithe r directly fro m Fairchild or from A uthorized Fairchil d
Distributors who are listed by country on our web page cited above. Products customers buy either from fairchild directly or from Authorized Fairchild
Distributors are genuine parts, have full traceabi lity, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of
up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and
warranty issues that may arise. Fairchild wi ll not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is
committed to combat this global problem and encourage our custo mers to do their part in stopping this practice by buying direct or from authorized distributors.