FLIR LEPTON (R) Longwave Infrared (LWIR) Camera Module The FLIR Lepton is an LWIR camera solution that is smaller than a dime, can fit inside a cell phone, and is ten times less expensive than a traditional IR camera. Using a focal plane array (FPA) of 80 x 60 active pixel, Lepton easily integrates into native mobile-devices and other electronics as an IR sensor or thermal imager. ENHANCED IR SENSOR Greater sensitivity than common thermopile arrays * Thermal sensitivity <50 mK * Optional temperature-stable output to support radiometric processing * Low operating power, 150mW * Low power standby mode MICRO THERMAL IMAGER Uncooled thermal imaging for small electronics * Integrated digital thermal image processing * Multiple lens options: 50 / 25 FOV * Shutter option available * Fast time to image (<0.5 seconds) EASE OF INTEGRATION Simplifies development and manufacturing of thermal-enabled devices * 8.5 x 8.5 x 5.6 mm package * Export Compliant (<9Hz) * MIPI and SPI video interfaces * Uses standard cell phone-compatible power supplies * Two-wire serial control interface * 32-pin socket interface to connector www.flir.com/lepton Specifications Overiew LEPTON 50 shutterless Sensor technology Uncooled VOx microbolometer Spectral range Longwave infrared, 8 m to 14 m Array format 80 x 60, progressive scan Pixel size 17 m Effective frame rate 8.6 Hz (exportable) Thermal sensitivity Temperature compensation Non-uniformity corrections LEPTON 50 w/shutter LEPTON 25 <50 mK (0.050 C) Automatic. Output image independent of camera temperature. Shutterless, automatic (with scene motion) Image optimization Automatic with shutter Factory configured and fully automated FOV - horizontal 51 25 51 FOV - diagonal 63.5 31.3 63.5 Output format User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied) Solar protection Integral Electrical Input clock 25-MHz nominal, CMOS IO Voltage Levels Video data interface Control port Video over SPI CCI (I2C-like), CMOS IO Voltage Levels Input supply voltage (nominal) Power dissipation 2.8 V, 1.2 V, 2.5 V to 3.1 V IO Nominally 150 mW at room temperature (operating), 4 mW (standby) Mechanical Package dimensions - socket version Weight 8.5 x 8.5 x 5.6 mm (w x l x h) 0.55 grams (typ) 0.55 grams (typ) 0.55 grams (typ) Environmental Optimum operating temperature range -10 C to +65 C Non-operating temperature range -40 C to +80 C Shock 1500 G @ 0.4 ms SANTA BARBARA FLIR Systems, Inc. 70 Castilian Drive Goleta, CA 93117 USA PH: +1 805.964.9797 PORTLAND Corporate Headquarters FLIR Systems, Inc. 27700 SW Parkway Ave. Wilsonville, OR 97070 USA PH: +1 866.477.3687 EUROPE CHINA - SHANGHAI FLIR Systems Luxemburgstraat 2 2321 Meer Belgium PH: +32 (0) 3665 5100 FLIR Systems, Co., Ltd. K301-302, No.26 Lane 168, Daduhe Road, Putuo District, Shanghai 200062,P.R.China PH: +86-21-5169 7628 www.flir.com NASDAQ: FLIR Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. (c)2014 FLIR Systems, Inc. All rights reserved. (Updated 061215) www.flir.com/lepton