Longwave Infrared (LWIR) Camera Module
The FLIR Lepton is an LWIR camera solution that is smaller than a dime,
can t inside a cell phone, and is ten times less expensive than a traditional
IR camera. Using a focal plane array (FPA) of 80 × 60 active pixel, Lepton
easily integrates into native mobile-devices and other electronics as an IR
sensor or thermal imager.
ENHANCED IR SENSOR
Greater sensitivity than common thermopile arrays
Thermal sensitivity <50 mK
Optional temperature-stable output to support radiometric processing
Low operating power, 150mW
Low power standby mode
MICRO THERMAL IMAGER
Uncooled thermal imaging for small electronics
Integrated digital thermal image processing
Multiple lens options: 50° / 25° FOV
Shutter option available
Fast time to image (<0.5 seconds)
EASE OF INTEGRATION
Simplifies development and manufacturing
of thermal-enabled devices
8.5 x 8.5 x 5.6 mm package
Export Compliant (<9Hz)
MIPI and SPI video interfaces
Uses standard cell phone-compatible power supplies
Two-wire serial control interface
32-pin socket interface to connector
www.flir.com/lepton
FLIR LEPTON®
Specifications
Overiew LEPTON 50°
shutterless LEPTON 25° LEPTON 50°
w/shutter
Sensor technology Uncooled VOx microbolometer
Spectral range Longwave infrared, 8 μm to 14 μm
Array format 80 × 60, progressive scan
Pixel size 17 μm
Effective frame rate 8.6 Hz (exportable)
Thermal sensitivity <50 mK (0.050° C)
Temperature compensation Automatic. Output image independent of camera temperature.
Non-uniformity corrections Shutterless, automatic (with scene motion) Automatic with shutter
Image optimization Factory congured and fully automated
FOV - horizontal 51° 25° 51°
FOV - diagonal 63.5° 31.3° 63.5°
Output format User-selectable 14-bit, 8-bit (AGC applied),
or 24-bit RGB (AGC and colorization applied)
Solar protection Integral
Electrical
Input clock 25-MHz nominal, CMOS IO Voltage Levels
Video data interface Video over SPI
Control port CCI (I2C-like), CMOS IO Voltage Levels
Input supply voltage (nominal) 2.8 V, 1.2 V, 2.5 V to 3.1 V IO
Power dissipation Nominally 150 mW at room temperature (operating), 4 mW (standby)
Mechanical
Package dimensions –
socket version 8.5 × 8.5 × 5.6 mm (w × l × h)
Weight 0.55 grams (typ) 0.55 grams (typ) 0.55 grams (typ)
Environmental
Optimum operating
temperature range -10 °C to +65 °C
Non-operating
temperature range -40 °C to +80 °C
Shock 1500 G @ 0.4 ms
www.flir.com
NASDAQ: FLIR
SANTA BARBARA
FLIR Systems, Inc.
70 Castilian Drive
Goleta, CA 93117
USA
PH: +1 805.964.9797
PORTLAND
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
PH: +1 866.477.3687
EUROPE
FLIR Systems
Luxemburgstraat 2
2321 Meer
Belgium
PH: +32 (0) 3665 5100
CHINA – SHANGHAI
FLIR Systems, Co., Ltd.
K301-302, No.26 Lane
168, Daduhe Road,
Putuo District, Shanghai
200062,P.R.China
PH: +86-21-5169 7628
Equipment described herein may require US Government authorization for
export purposes. Diversion contrary to US law is prohibited. Imagery for
illustration purposes only. Specifications are subject to change without
notice. ©2014 FLIR Systems, Inc. All rights reserved. (Updated 061215)
www.flir.com/lepton