The pHAT DAC provides a super affordable high-quality DAC for the Raspberry Pi. Pumping out
24-bits at 192KHz of audio goodness from the Raspberry Pi's I2S interface on the 2x20 pin
GPIO header. Since it's digital audio, it sounds really good, much better than the onboard
analog audio. The 3.5mm stereo jack comes soldered onto the board already.
Though designed to match the format of the Raspberry Pi Zero it is compatible with all 40-
pin GPIO Raspberry Pi variants (2/B+/A+).
Features:
24-bit audio at 192KHz
Line out stereo jack
pHAT format board
Uses the PCM5102A DAC to work with the Raspberry Pi I2S interface
Kit includes: Assembled pHAT DAC & 2x20 0.1" female GPIO header, some light soldering is
required to attach the header on, or you can of course solder the pHAT right onto the Pi Zero
At the heart of pHAT DAC is Texas Instrument's PCM5102A stereo audio DAC chip. Raspberry
Pi not included!
TECHNICAL DETAILS
PCM5102A Datasheet
65mm x 33mm x 6.8mm / 2.56" x 1.3" x 0.27"
Weight (assembled): 11.2g
For pointers on how to set up your pHAT DAC, check out Pimoroni's tutorial!
For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni
forum or contact Pimoroni directly.
LEARN