MPD2002CT1 - VISHAY - Datasheet.Live

MPD, MPDA

www.vishay.com Vishay Dale Thin Film

Revision: 20-Oct-11 1Document Number: 60016

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Molded, SOT-143 Thin Film Resistor, Surface Mount Network

Vishay Dale Thin Film MPD Series Dividers provide

± 2 ppm/°C tracking and a ratio tolerance as tight as

± 0.05 %, small size, and exceptional stability for all surface

mount applications. The standard SOT-143 package format

with unity and common standard resistance divider ratios

provide easy selection for most applications requiring

matched pair resistor elements. The ratios listed are

available for off the shelf convenience, if you require a

non-standard ratio, consult the applications engineering

group as we may be able to meet your requirements.

SCHEMATIC

FEATURES

• Tight ratio tolerances to 0.05 %

• ± 2 ppm tracking

• Standard values stocked

• Standard JEDEC TO-253 package

• Compliant to RoHS Directive 2002/95/EC

• Halogen-free according to IEC 61249-2-21

definition

Note

*Pb containing terminations are not RoHS compliant, exemptions

may apply

TYPICAL PERFORMANCE

Note

• Tantalum nitride film is available on special orders

Actual Size

(R1 ref)

MPD MPDA

ABSOLUTE TRACKING

TCR 25 2

ABSOLUTE RATIO

TOL.0.1 0.05

STANDARD VALUES

MODEL R1 ()R

2 ()R

3 ()

MPD

100K 100K -

50K 50K -

25K 25K -

20K 20K -

10K 10K -

5K 5K -

2K 2K -

1K 1K -

MPDA 10K 10K 10K

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Passivated nichrome -

Pin/Lead Number 4-

Resistance Range 1000  to 100 k per resistor -

TCR: Absolute ± 25 ppm/°C - 55 °C to + 125 °C

TCR: Tracking ± 2 ppm/°C (typical) - 55 °C to + 125 °C

Tolerance: Absolute ± 0.1 % to ± 1.0 % + 25 °C

Tolerance: Ratio ± 0.05 % to ± 0.5 % + 25 °C

Power Rating: Resistor 100 mW Maximum at + 70 °C

Power Rating: Package 200 mW Maximum at + 70 °C

Stability: Absolute R ± 0.05 % 2000 h at + 70 °C

Stability: Ratio R ± 0.015 % 2000 h at + 70 °C

Voltage Coefficient 0.1 ppm/V -

Working Voltage 100 V max. not to exceed -

Operating Temperature Range - 55 °C to + 125 °C -

Storage Temperature Range - 55 °C to + 150 °C -

Noise < - 25 dB -

Thermal EMF 0.2 μV/°C -

Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C

Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C

P x R

MPD, MPDA

www.vishay.com Vishay Dale Thin Film

Revision: 20-Oct-11 2Document Number: 60016

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Preferred packaging code

DIMENSIONS AND IMPRINTING in millimeters

DIMENSION MIN. NOM. MAX.

A 0.80 - 1.22

A1 0.05 - 0.15

A2 0.75 0.90 1.07

b 0.30 - 0.50

b1 0.30 0.40 0.45

b2 0.76 - 0.89

b3 0.76 0.80 0.84

c 0.08 - 0.20

c1 0.08 0.10 0.16

D 2.80 2.90 3.04

E 2.10 - 2.64

E1 1.20 1.30 1.40

e 1.92 BSC

e1 0.20 BSC

L 0.40 0.50 0.60

L1 0.54 REF.

Ø0" - 8"

Seating

Plane

E1 E

e1 3 x b

See View C

Seating Plane

Gauge Plane

0.25

(b)

(b2)

Base Metal

With Plating

cc1

VIEW C

MECHANICAL SPECIFICATIONS

Resistive Element Passivated nichrome

Substrate Material Silicon

Body Molded epoxy

Terminals Copper alloy

Lead (Pb)-free Option 100 % matte tin

Tin Lead Option Sn85

Tin Lead and Lead (Pb)-free Finish Plated

DERATING CURVE

Ambient Temperature °C

0 70 125 150

100

Precent of Rated Power

100 % = 0.20 W

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: MPD1003AWS

GLOBAL MODEL

(3 or 4 digits)

RESISTANCE

(4 or 8 digits)

TOLERANCE AND

RATIO TOLERANCE PACKAGING

MPD

(Two resistors, tin lead)

MPDT

(Two resistors,

lead (Pb)-free) (e3)

The first 3 digits are significant

figures and the last digit

specifies the number of zeros

to follow. When like values are

required use total resistance.

Example:

1002 = 10K (5K/5K)

1003 = 100K (50K/50K)

Abs. Tol.

A = ± 0.1 %

B = ± 0.1 %

C = ± 0.25

D = ± 0.5 %

F = ± 1 %

Ratio

± 0.05 %

± 0.1 %

± 0.5 %

BS = BULK 100 min., 1 mult

WS = WAFFLE 100 min., 1 mult

TAPE AND REEL

T1 = 1000 min., 1000 mult (1)

Historical Part Number example: MPD1002BW (for reference purposes only)

MPD 1002 B W

SERIES RESISTANCE TOLERANCE AND

RATIO TOLERANCE PACKAGING

PDT2001MAT1

PD1003MAWS

MPD, MPDA

www.vishay.com Vishay Dale Thin Film

Revision: 20-Oct-11 3Document Number: 60016

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Preferred packaging code

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: MPDAT3002AWS

GLOBAL MODEL

(4 or 5 digits) RESISTANCE TOLERANCE AND

RATIO TOLERANCE PACKAGING

MPDA

(Three equal series

resistors, tin/lead)

MPDAT

(Three equal series

resistors, lead (Pb)-free)

(e3)

First 3 digits are significant

figures and the last digit

specifies the number of zeros

to follow. When like values are

required use total resistance.

Example:

3002 = Three 10 k resistors

Abs. Tol.

A = ± 0.1 %

B = ± 0.1 %

C = ± 0.25

D = ± 0.5 %

F = ± 1 %

Ratio

± 0.05 %

± 0.1 %

± 0.5 %

BS = BULK 100 min., 1 mult

WS = WAFFLE 100 min., 1 mult

TAPE AND REEL

T1 = 1000 min., 1000 mult (1)

Historical Part Number example: MPDA3002BT (for reference purposes only)

MPDA 3002 B T

SERIES RESISTANCE TOLERANCE AND

RATIO TOLERANCE PACKAGING

DAT 3 0 0 2AWSMP

DA3002AWSMP

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.