Back Diode Detector 2085 Series V 3.00 Specifications Mechanical Outline Drawing Parameter Specification Bias Current 0 Negative 4 Output Polarity Video Resistance 80 Ohms Nominal 2 Maximum Power 40 mW CW or 3 erg spike Temperature Stability 1 dB over operating range of -65C to +100C Temperature Range -65C to +100C Finish Passivated Stainless Steel Detector Part Number Frequency Range (GHz) Flatness1 Typical ( dB) VSWR1 Typical 2085-6010-00 1.0 - 18.0 1.5 4.0 2085-6013-00 1.0 - 2.0 0.2 2085-6014-00 2.0 - 4.0 2085-6015-00 Open Circuit Sensitivity2 (mV/mW) Tangential Sensitivity3 (-dBm) Output Capacitance Typical (pF) Dim. A Inches (mm) Typ. Min Typ. Min. 500 400 47.0 46.0 12 1.35 (34.3) 2.5 780 700 53.0 52.0 18 1.35 (34.3) 0.3 1.8 840 750 53.5 52.5 18 1.55 (39.4) 4.0 - 8.0 0.4 2.5 610 525 52.0 51.0 12 1.55 (39.4) 2085-6016-00 8.0 - 12.4 0.5 2.0 640 550 52.5 51.5 12 1.55 (39.4) 2085-6017-00 12.4 - 18.0 0.5 2.5 600 500 52.0 51.0 9 1.55 (39.4) Typical Extended Band Performance Detector Part Number Frequency Range (GHz) Flatness1 Typical ( dB) VSWR1 Typical Open Circuit Sensitivity2 (mV/mW) Typical Tangential Sensitivity3 (-dBm) Output Capacitance Typical (pF) 2085-6013-00 0.85 - 6.0 1.0 3:1 500 50.0 18 2085-6014-00 1.4 - 5.0 1.0 3:1 500 50.0 18 2085-6015-00 3.9 - 9.5 1.0 3:1 500 50.0 12 2085-6016-00 6.5 - 14.0 1.0 3:1 400 49.0 12 2085-6017-00 2.7 - 18.5 1.0 3:1 400 49.0 9 1. 2. 3. 4. For RF Power levels below -20 dBm, and with 1,000 ohm load. For RF power levels below -20 dBm. With video amplifier of 1 MHz bandwidth, and 2 dB noise figure. For Positive Output change suffix to -13.