cExpress-HL-2980U - ADLINK Technology

cExpress-HL

COM Express

Compact Size Type 6 Module with Intel

Core™ i7/i5/i3 Processor

Features

●

4th Generation Intel

Core™ i7/i5/i3 Processor SoC

●

Up to 16 GB DDR3L SDRAM at 1600MHz

●

Two DDI channels, one LVDS supporting 3 independent displays

●

Four PCIe x1 or 1 PCIe x4

●

GbE, four SATA 6 Gb/s, two USB 3.0, six USB 2.0

●

Supports Smart Embedded Management Agent (SEMA

) functions

●

Extreme Rugged operating temperature: -40°C to +85°C

(build option)

Specications

● Core System

CPU

4th Generation Intel

Core™ Processors (Mobile) - 22nm (formerly codename

“Haswell-ULT”)

Core™ i7-4650U 1.7 GHz (3.3 GHz Turbo), 15W (2C/GT3)

Core™ i5-4300U 1.9 GHz (2.9 GHz Turbo), 15W (2C/GT2)

Core™ i3-4010U 1.7 GHz (no Turbo) 3MB, 15W (2C/GT2)

Celeron

2980U 1.6 GHz (no Turbo) 15W (2C/GT1)

Supports : Intel

VT, Intel

TXT, Intel

SSE4.2, Intel

HT Technology, Intel

Architecture, Execute Disable Bit, Intel

Turbo Boost Technology 2.0, Intel

AVX2, Intel

AES-NI, PCLMULQDQ Instruction, Intel

Secure Key and Intel

TSX

Note: Availability of the features may vary between processor SKUs.

Memory

Dual channel non-ECC 1600/1333 MHz DDR3L memory up to 16GB in dual

SODIMM socket

Embedded BIOS

AMI EFI with CMOS backup in 8MB SPI BIOS with Intel

AMT 9.0 support

L3 Cache

4MB for i7-4650U, 3MB for i5-4300U and i3-4010U; 2MB for 2980U

Expansion Busses

4 PCI Express x1: lanes 0/1/2/3

LPC bus, SMBus (system), I2C (user)

SEMA Board Controller

Supports : Voltage/Current monitoring, Power sequence debug support, AT/

ATX mode control, Logistics and Forensic information, Flat Panel Control,

General Purpose I2C, Failsafe BIOS (dual BIOS ), Watchdog Timer and Fan

Control

Debug Headers

40-pin multipurpose at cable connector

Use in combination with DB-40 debug module

Providing BIOS POST code LED, BMC access, SPI BIOS ashing, power

testpoints, debug LEDs

60-pin XDP header for ICE debug of CPU/Chipset

● Video

GPU Feature Support

Generation 7.5 graphics core architecture, supporting

3 independent and simultaneous display combinations of DisplayPort/ HDMI/

LVDS monitors

Encode/transcode HD content

LVDS

Single/dual channel 18/24-bit LVDS from eDP (two lanes)

Digital Display Interface

DDI1 supporting DisplayPort / HDMI / DVI

DDI2 supporting DisplayPort / HDMI / DVI

● Audio

Chipset

Intel

HD Audio integrated in SoC

Audio Codec

Located on carrier Express-BASE6 (ALC886 standard supported)

● Ethernet

Intel

MAC/PHY: i218LM (Enterprise SKU) with AMT 9.0 support

Interface: 10/100/1000 GbE connection

● I/O Interfaces

USB: 2x USB 3.0 (USB 0,1) and 6x USB 2.0 (USB2,3,4,5,6,7)

SATA: Four ports SATA 6Gb/s (SATA0, SATA1, SATA2, SATA3)

Serial: 2 UART ports COM1/2 with console redirection

GPIO: 4 GPO and 4 GPI with interrupt

● Super I/O

On carrier if needed (standard support for W83627DHG-P)

● TPM

Chipset: Atmel AT97SC3204

Type: TPM 1.2

Note: “build option” indicates an alternative BOM conguration to support additional or alternative functions that are not available on the standard product.

Be aware that these “build option” part numbers will need to be newly created and this will result in production lead times.

Specications

● Power

Standard Input: ATX = 12V±5% / 5Vsb ±5% or AT = 12V±5%

Wide Input: ATX = 5~20 V / 5Vsb ±5% or AT = 5~20V

Management: ACPI 4.0 compliant, Smart Battery support

Power States: C1-C6, S0, S1, S4, S3, S5 , S5 ECO mode (Wake on USB S3/S4,

WOL S3/S4/S5)

ECO mode: Supports deep S5 mode for power saving

● Operating Systems

Standard Support

Windows 7/8 32/64-bit, Linux 32/64-bit

Extended Support (BSP)

WES7/8, Linux , VxWorks

● Mechanical and Environmental

Form Factor: PICMG COM.0: Rev 2.1 Type 6

Dimension: Compact size: 95 mm x 95 mm

Operating Temperature

Standard: 0°C to +60°C

Extreme Rugged™: -40°C to +85°C (build option)

Humidity

5-90% RH operating, non-condensing

5-95% RH storage (and operating with conformal coating)

Shock and Vibration

IEC 60068-2-64 and IEC-60068-2-27

MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A,

Table 214-I, Condition D

HALT

Thermal Stress, Vibration Stress, Thermal Shock and Combined Test

Note: “build option” indicates an alternative BOM conguration to support additional or alternative functions that are not available on the standard product.

Be aware that these “build option” part numbers will need to be newly created and this will result in production lead times.

Functional Diagram

LM73

eDP - LVDS

RTD2136R/N

4th Generaon

Intel® Core™

i7/i5/i3 Processor

SoC

“Haswell - ULT”

GbE

i218LM

GPIO

PCA9535

SEMA

BMC

SMBus

4x GP0

GP I2C

SPI 0

BIOS

SODIMM 2

1333/1600 MHz

1~8 GB DDR3L

SPI

4x GPI

XDP

60-pin

4x PCIe x1 (Gen2)

(port 0~3)

PCIe x1

(port 4)

HD Audio

4x SATA3

(port 0/1/2/3)

6x USB 2.0

(port 2~7)

2x USB 3.0

(port 0/1)

SPI 1

BIOS

DDC I2C

SODIMM 2

1333/1600 MHz

1~8 GB DDR3L

SPI_CS0

SPI_CS1

SPI_CS#

DDI0(portB)

DP/HDMI/DVI

DDI 1 (port C)

DP / HDMI / DVI

eDP

2 lane

single / dual

18-24-bit LVDS

TPM

Atmel

AT97SC3204

Serial

NCT5104D

LPC bus

UART1

UART0

www.adlinktech.com

All products and company name listed are trademarks or trade names of their respective companies.

All specifications are subject to change without further notice.

Ordering Information

●

cExpress-HL-i7-4650U

COM Express

Compact Size Type 6 Module with Intel

Core™

i7-4650U at 1.7 GHz with GT3 level graphics

●

cExpress-HL-i5-4300U

COM Express

Compact Size Type 6 Module with Intel

Core™

i5-4300U at 1.9 GHz with GT2 level graphics

●

cExpress-HL-i3-4010U

COM Express

Compact Size Type 6 Module with Intel

Core™

i3-4010U at 1.7 GHz with GT2 level graphics

●

cExpress-HL-2980U

COM Express

Compact Size Type 6 Module with Intel

Celeron

2980u with 1.6GHz ULV 15W 2+1F and HD graphics

Accessories

Heat Spreaders

●

HTS-cHL-B

Heatspreader for cExpress-HL with threaded standoffs for

bottom mounting

●

HTS-cHL-BT

Heatspreader for cExpress-HL with through hole standoffs for

top mounting

Passive Heatsinks

●

THS-cHL-B

Low profile heatsink for cExpress-HL with threaded standoffs

for bottom mounting

●

THS-cHL-BT

Low profile heatsink for cExpress-HL with through hole

standoffs for top mounting

●

THSH-cHL-B

High profile heatsink for cExpress-HL with threaded standoffs

for bottom mounting

Active Heatsink

●

THSF-cHL-B

High profile heatsink with Fan for cExpress-HL with threaded

standoffs for bottom mounting

Starter Kit

●

COM Express Type 6 Starter Kit Plus

COM Express formfactor starter kit with Express-BASE6 board,

power supply, and accessory kit

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

ADLINK Technology:

THS-cHL-B cExpress-HL-i3-4010U HTS-cHL-BT cExpress-HL-i7-4650U cExpress-HL-2980U THSF-cHL-B THS-

cHL-BT cExpress-HL-i5-4300U HTS-cHL-B THSH-cHL-B t2cExpress-HL-i3-4010U t2cExpress-HL-2980U

t2cExpress-HL-i5-4300U t2cExpress-HL-i7-4650U