GSP-810 - GW INSTEK - Datasheet.Live

GSP-810

Made to Measure. Good Will Instrument Co., Ltd.

SPECTRUM ANALYZERS

B17 B18

1GHz SPECTRUM ANALYZER

SPECIFICATIONS

GSP-810 (150kHz~1GHz)

FEATURES

* Options:Tracking Generator,

Romote Control

Power Meter,

Software

* RS-232C Interface and Software to get Trace

from GSP-810 to PC

* 9 Memories of Save/Recall

* Functions: Max. Hold, Average(2 ~ 32 Traces),

Freeze, Peak Search, Marker to Center Functions

* Two Markers for Absolute and Relative

Measurement

@30kHz, -100dBm Typical @220kHz RBW

* Good Noise Floor Performance: -95dBm

* Reference Level Range : -30dBm ~ +20dBm

* RBW : 3k, 30k, 220k, 4MHz

* High Resolution of Span to Measure the More

Zero, 2kHz~100MHz/divDetailed Signal :

10ppm: StabilityFrequency High *

* Fully Digital Phase Locked Loop Technique

Design

* Frequency Range : 150kHz ~ 1GHz

* High Input Protection Level : +30dBm,

25VDC

Demodulator WB FM, 120kHz deviation

MB FM, 75kHz deviation

NB FM, 30kHz deviation

Outputs : Internal speaker, 3.5mm stereo jack, wired for mono operation

Calibrate Signal 80MHz, -30dBm

POWER SOURCE

INTERFACE

ACCESSORIES :

DIMENSIONS & WEIGHT

RS-232C standard & remote display software

(The software will be downloaded from GW Website.)

AC 100V/120V/220V/230V 10%, 50/60Hz

User manual x 1, Power cord x 1

310(W) x 150(H) x 455(D) mm, Approx. 8.5kg

FREQUENCY

Frequency Range

Aging Rate

Span Range

Phase Noise

Frequency Resolution

Frequency Display

Frequency Control

150kHz~1GHz

10ppm, 0~50 C, 2ppm/yr

Zero, 2kHz~100MHz/div in 1-2-5 sequence

-77dBc/Hz @ 1GHz 30kHz offset

1kHz C.F. entry, 40Hz sweep resolution at 2kHz/div

6 1/2 digit setting

Digital phase locked

RESOLUTION BANDWIDTH

RBW Range

RBW Accuracy

Video Bandwidth Range

AMPLITUDE

Measurement Range

Overload Protection

Reference Level Range

Amplitude Display Range

Amplitude Accuracy

Frequency Flatness

Amplitude Level Linearity

3kHz, 30kHz, 220kHz, 4MHz

15%

1.6kHz/90kHz couple with RBW

-100dBm~+20dBm

+30dBm continuous, 25VDC

-30dBm~+20dBm

75dB

1.5dB typical @ 0dBm, 80MHz

1.5dB over 100MHz, 2.5dB typical over entire band/ 3dB:150kHz~10MHz

1.5dB over 70dB

DYNAMIC RANGE

Average Noise Floor -95dBm @30kHz RBW, -100dBm typical /-75dBm: 150kHz~10MHz

Third Inter-Modulation

Harmonic Distortion

Non-Harmonic Spurious

DISPLAY SYSTEM

Display Device

Display Function

FUNCTIONS

Marker Mode

Number of Markers

Marker Resolution

Marker Accuracy

Memory

Trace

Setup

<-70dBc, @-40dBm input, 2tones, 2MHz apart/

<-45dBc:150kHz~10MHz

<-40dBc, RF input < selected reference

<-60dBc typical down from reference level, average, 5MHz/div

CRT Display, 8 x 10 graticule, 6-inch waveform screen

LCD Display, 4 line x 20 character data screen

Center Frequency Control, Bandwidth, Reference Level, Span Range, Amplitude

Absolute, relative, PK->marker, marker->center

0.1dB, 1kHz

0.1dB amplitude accuracy

10 memorise of save/recall

Max. hold, average(2~32 traces), freeze(Hold)

Access parameters

Opt. 01

Opt. 02

Opt. 03

REMOTE CONTROL SOFTWARE

Connecting PC to get the trace and provide the control for setting

Type N female

TRACKING GENERATOR (Factory Installed)

Frequency Range

Power Level Range

Power Level Overload

Return Loss

Readout Resolution

Accuracy

Readout

POWER METER (Factory Installed)

10MHz ~ 2 GHz, usable to 2.7GHz

-20 dBm ~ +23 dBm, usable to +30 dBm

+40 dBm < 10% duty cycle, < 10 mS duration

< 1:1.35 VSWR into 50 ohms, < 1:1.25 typical

0.2 mW, 100 mW scale, 2 W, 1 mW scale;

0.1dB, Log scale

(10% rdg 1digit)

mW or dBm

Frequency Range

Amplitude Resolution

Amplitude Accuracy

Attenuation Accuracy

Amplitude Flatness

Harmonics

Reverse Power

Impedance

Return Loss

Connector

150kHz ~ 1GHz

50 dBm ~ 0dBmAmplitude Range

1 dB

1 dB @ 0 dBm, 80 MHz

1 dB @ 50 MHz

1 dB @ 10 MHz/DIV, 1.5dB@0dB,entire band

< -30 dBc (<-25dBc, 150kHz ~ 10MHz)

< +30 dBm

50 nominal

< 10 dB (VSWR < 2)

+_ +_

ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2

ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1

GSC-002: Kit box x 1

ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2

ADP-101: adaptor,BNC(J/F)75 ~BNC(P/M)50 x 2

GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2

GSC-003: Kit box x 1

GAK-001: termination 50 , N(P/M) x 1

GAK-002: Cap with chain, N(P/M) x 1

GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2

GSC-004: Kit box x 1

GKT-001 General Kit set

GKT-002

GKT-003

GKT-006

ATA-001

GTL-301

BNC Antenna

RF Cable

CATV Kit set

RLB Kit set

EMI Probe Kit set

RG 223 N(P/M), 1000mm

ANT-02: 3cm Loop, H-Field Probe x 1

ANT-01: 6cm Loop, H-Field Probe x 1

ANT-03 6mm Stub tip, E- Field Probe x 1

PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1

ADP-01: N(P/M)~BNC(J/F) Adapter x 1

Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1

Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1

RLB-001 Return Loss Bridge

RLB Frequency Range 10MHz ~ 1GHz

1GHz Spectrum Analyzer

GSP-810

(An additional ADP-001 is needed for fitting GSP spectrum analyzers)

GSC-002

ADP-002

ATN-100

GTL-303

For:GSP-810/827/830

GSC-003

ADP-001

ADP-101

GTL-304

For:GSP-810/827/830

GSC-004

GAK-001

GAK-002

GTL-302

For:GSP-810/827/830

GKT-001 General Kit Set

GKT-002 CATV Kit Set

GKT-003 RLB Kit Set

For:GSP-810/827/830

GKT-006 EMI Probe Kit Set

ANT-02

ANT-01

ANT-03

PR-03

ADP-02

ADP-01

Test Lead: BNC(P)~BNC(P) RF Cable x 1

Test Lead: SMA(P)~SMA(P) RF Cable x 1

10MHz ~ 1GHz

For: GSP-810/827/830

RLB-001 Return Loss Bridge

The GSP-810 Spectrum Analyzer is a digitally synthesized, easy-to-use RF measurement instrument

with a frequency range up to 1GHz. It uses a state-of-the-art design with a phased-locked RF system

that combines measurement quality and performance with an affordable price. For flexibility and versa

tility, the GSP-810 has a number of options and optional accessories such as a factory installed

tracking generator or the extensive probe kit options. The GSP-810 is also designed for rugged use

with a 1-watt input protection. The small size and light weight of the GSP-810 make it easy to carry

and stow anywhere.

The GSP-810 includes free software (Windows 2000/XP compatible) for displaying, saving and

printing results via the standard RS232 interface. Optional software is also available for full PC remote

control at additional cost.

All these functions and features make the GSP-810 an affordable, expandable, and high quality

instrument suitable for a variety of applications.

Note: Need to Collocate the Optional Accessories.

ORDERING INFORMATION

OPTION

OPTIONAL ACCESSORIES

FREE DOWNLOAD

PC Software

Programming Labrary

Remote Display Software

DLL file for Programming Use

GTL-303: RF cable assembly(RD316),SMA(P/M),600mm) x 2

ATA-002

Near Field Probe (An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers)

GTP-3000

Passive touch Probe Set

PR-03 Passive touch probe, SMA(F) ADP-002 Adaptor, SMA(J/F) ~ N(P/M)

GTL-303RF Cable Assembly, SMA(P/M), 600mm