1N4969JAN - MICROSEMI - Datasheet.Live

TZM-Series

Vishay Semiconductors

17205

Document Number 84122

Rev. 1.5, 19-Apr-11

www.vishay.com

For technical questions within your region, please contact one of the following:

DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Small Signal Zener Diodes

Features

• Very sharp reverse characteristic

• Low reverse current level

• Very high stability

•Low noise

• TZMC - VZ-tolerance ± 5 %

• TZMB - VZ-tolerance ± 2 %

• AEC-Q101 qualified

• Compliant to RoHS Directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

Applications

• Voltage stabilization

Mechanical Data

Case: MiniMELF SOD-80

Weight: approx. 31 mg

Cathode band color: black

Packaging codes/options:

GS08/2.5K per 7" reel (8 mm tape), 12.5K/box

GS18/10K per 13" reel (8 mm tape), 10K/box

Absolute Maximum Ratings

Tamb = 25 °C, unless otherwise specified

Thermal Characteristics

Tamb = 25 °C, unless otherwise specified

Electrical Characteristics

Tamb = 25 °C, unless otherwise specified

Parameter Test condition Symbol Value Unit

Power dissipation RthJA  300 K/W Ptot 500 mW

Z-current IZPtot/VZmA

Parameter Test condition Symbol Value Unit

Thermal resistance junction to ambient air On PC board 50 mm x 50 mm x 1.6 mm RthJA 500 K/W

Junction temperature Tj175 °C

Storage temperature range Tstg - 65 to + 175 °C

Parameter Test condition Symbol Min. Ty p. Max. Unit

Forward voltage IF = 200 mA VF1.5 V

TZM-Series

Vishay Semiconductors

Document Number 84122

Rev. 1.5, 19-Apr-11

www.vishay.com

For technical questions within your region, please contact one of the following:

DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Electrical Characteristics

Note:

Additional measurement of voltage group TZMC9V1 to TZMC75, IR at 95 % VZmin 35 nA at Tj = 25 °C

1) at Tj = 150 °C

Part number

Zener voltage

range

Dynamic

resistance Test current Reverse leakage current

Temperature

coefficient of zener

voltage

VZ at IZT

rzjT at

IZT

rzjK at

IZK

IZT IZK IRIR 1) at VRTKVZ

V V   mA mA µA µA V%/K %/K

min. max. typ . typ. min. max.

TZMC2V4 2.28 2.56 < 85 < 600 5 1 < 50 < 100 1 - 0.09 - 0.06

TZMC2V7 2.5 2.9 < 85 < 600 5 1 < 10 < 50 1 - 0.09 - 0.06

TZMC3V0 2.8 3.2 < 90 < 600 5 1 < 4 < 40 1 - 0.08 - 0.05

TZMC3V3 3.1 3.5 < 90 < 600 5 1 < 2 < 40 1 - 0.08 - 0.05

TZMC3V6 3.4 3.8 < 90 < 600 5 1 < 2 < 40 1 - 0.08 - 0.05

TZMC3V9 3.7 4.1 < 90 < 600 5 1 < 2 < 40 1 - 0.08 - 0.05

TZMC4V3 4 4.6 < 90 < 600 5 1 < 1 < 20 1 - 0.06 - 0.03

TZMC4V7 4.4 5 < 80 < 600 5 1 < 0.5 < 10 1 - 0.05 0.02

TZMC5V1 4.8 5.4 < 60 < 550 5 1 < 0.1 < 2 1 - 0.02 0.02

TZMC5V6 5.2 6 < 40 < 450 5 1 < 0.1 < 2 1 - 0.05 0.05

TZMC6V2 5.8 6.6 < 10 < 200 5 1 < 0.1 < 2 2 0.03 0.06

TZMC6V8 6.4 7.2 < 8 < 150 5 1 < 0.1 < 2 3 0.03 0.07

TZMC7V5 7 7.9 < 7 < 50 5 1 < 0.1 < 2 5 0.03 0.07

TZMC8V2 7.7 8.7 < 7 < 50 5 1 < 0.1 < 2 6.2 0.03 0.08

TZMC9V1 8.5 9.6 < 10 < 50 5 1 < 0.1 < 2 6.8 0.03 0.09

TZMC10 9.4 10.6 < 15 < 70 5 1 < 0.1 < 2 7.5 0.03 0.1

TZMC11 10.4 11.6 < 20 < 70 5 1 < 0.1 < 2 8.2 0.03 0.11

TZMC12 11.4 12.7 < 20 < 90 5 1 < 0.1 < 2 9.1 0.03 0.11

TZMC13 12.4 14.1 < 26 < 110 5 1 < 0.1 < 2 10 0.03 0.11

TZMC15 13.8 15.6 < 30 < 110 5 1 < 0.1 < 2 11 0.03 0.11

TZMC16 15.3 17.1 < 40 < 170 5 1 < 0.1 < 2 12 0.03 0.11

TZMC18 16.8 19.1 < 50 < 170 5 1 < 0.1 < 2 13 0.03 0.11

TZMC20 18.8 21.2 < 55 < 220 5 1 < 0.1 < 2 15 0.03 0.11

TZMC22 20.8 23.3 < 55 < 220 5 1 < 0.1 < 2 16 0.04 0.12

TZMC24 22.8 25.6 < 80 < 220 5 1 < 0.1 < 2 18 0.04 0,12

TZMC27 25.1 28.9 < 80 < 220 5 1 < 0.1 < 2 20 0.04 0.12

TZMC30 28 32 < 80 < 220 5 1 < 0.1 < 2 22 0.04 0.12

TZMC33 31 35 < 80 < 220 5 1 < 0.1 < 2 24 0.04 0.12

TZMC36 34 38 < 80 < 220 5 1 < 0.1 < 2 27 0.04 0.12

TZMC39 37 41 < 90 < 500 2.5 0.5 < 0.1 < 5 30 0.04 0.12

TZMC43 40 46 < 90 < 600 2.5 0.5 < 0.1 < 5 33 0.04 0.12

TZMC47 44 50 < 110 < 700 2.5 0.5 < 0.1 < 5 36 0.04 0.12

TZMC51 48 54 < 125 < 700 2.5 0.5 < 0.1 < 10 39 0.04 0.12

TZMC56 52 60 < 135 < 1000 2.5 0.5 < 0.1 < 10 43 0.04 0.12

TZMC62 58 66 < 150 < 1000 2.5 0.5 < 0.1 < 10 47 0.04 0.12

TZMC68 64 72 < 200 < 1000 2.5 0.5 < 0.1 < 10 51 0.04 0.12

TZMC75 70 79 < 250 < 1500 2.5 0.5 < 0.1 < 10 56 0.04 0.12

TZM-Series

Vishay Semiconductors

Document Number 84122

Rev. 1.5, 19-Apr-11

www.vishay.com

For technical questions within your region, please contact one of the following:

DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Electrical Characteristics

Note:

Additional measurement of voltage group TZMB9V1 to TZMB75, IR at 95 % VZmin  35 nA at Tj = 25 °C

1) at Tj = 150 °C

Part number

Zener voltage

range

Dynamic

resistance Test current Reverse leakage current

Temperature

coefficient of zener

voltage

VZ at IZT

rzjT at

IZT

rzjK at

IZK

IZT IZK IRIR 1) at VRTKVZ

V V   mA mA µA µA V%/K %/K

min. max. typ. typ . min. max.

TZMB2V4 2.35 2.45 < 85 < 600 5 1 < 50 < 100 1 - 0.09 - 0.06

TZMB2V7 2.64 2.76 < 85 < 600 5 1 < 10 < 50 1 - 0.09 - 0.06

TZMB3V0 2.94 3.06 < 90 < 600 5 1 < 4 < 40 1 - 0.08 - 0.05

TZMB3V3 3.24 3.36 < 90 < 600 5 1 < 2 < 40 1 - 0.08 - 0.05

TZMB3V6 3.52 3.68 < 90 < 600 5 1 < 2 < 40 1 - 0.08 - 0.05

TZMB3V9 3.82 3.98 < 90 < 600 5 1 < 2 < 40 1 - 0.08 - 0.05

TZMB4V3 4.22 4.38 < 90 < 600 5 1 < 1 < 20 1 - 0.06 -0.03

TZMB4V7 4.6 4.8 < 80 < 600 5 1 < 0.5 < 10 1 - 0.05 0.02

TZMB5V1 5 5.2 < 60 < 550 5 1 < 0.1 < 2 1 - 0.02 0.02

TZMB5V6 5.48 5.72 < 40 < 450 5 1 < 0.1 < 2 1 - 0.05 0.05

TZMB6V2 6.08 6.32 < 10 < 200 5 1 < 0.1 < 2 2 0.03 0.06

TZMB6V8 6.66 6.94 < 8 < 150 5 1 < 0.1 < 2 3 0.03 0.07

TZMB7V5 7.35 7.65 < 7 < 50 5 1 < 0.1 < 2 5 0.03 0.07

TZMB8V2 8.04 8.36 < 7 < 50 5 1 < 0.1 < 2 6.2 0.03 0.08

TZMB9V1 8.92 9.28 < 10 < 50 5 1 < 0.1 < 2 6.8 0.03 0.09

TZMB10 9.8 10.2 < 15 < 70 5 1 < 0.1 < 2 7.5 0.03 0.1

TZMB11 10.78 11.22 < 20 < 70 5 1 < 0.1 < 2 8.2 0.03 0.11

TZMB12 11.76 12.24 < 20 < 90 5 1 < 0.1 < 2 9.1 0.03 0.11

TZMB13 12.74 13.26 < 26 < 110 5 1 < 0.1 < 2 10 0.03 0.11

TZMB15 14.7 15.3 < 30 < 110 5 1 < 0.1 < 2 11 0.03 0.11

TZMB16 15.7 16.3 < 40 < 170 5 1 < 0.1 < 2 12 0.03 0.11

TZMB18 17.64 18.36 < 50 < 170 5 1 < 0.1 < 2 13 0.03 0.11

TZMB20 19.6 20.4 < 55 < 220 5 1 < 0.1 < 2 15 0.03 0.11

TZMB22 21.55 22.45 < 55 < 220 5 1 < 0.1 < 2 16 0.04 0.12

TZMB24 23.5 24.5 < 80 < 220 5 1 < 0.1 < 2 18 0.04 0,12

TZMB27 26.4 27.6 < 80 < 220 5 1 < 0.1 < 2 20 0.04 0.12

TZMB30 29.4 30.6 < 80 < 220 5 1 < 0.1 < 2 22 0.04 0.12

TZMB33 32.4 33.6 < 80 < 220 5 1 < 0.1 < 2 24 0.04 0.12

TZMB36 35.3 36.7 < 80 < 220 5 1 < 0.1 < 2 27 0.04 0.12

TZMB39 38.2 39.8 < 90 < 500 2.5 1 < 0.1 < 5 30 0.04 0.12

TZMB43 42.1 43.9 < 90 < 600 2.5 0.5 < 0.1 < 5 33 0.04 0.12

TZMB47 46.1 47.9 < 110 < 700 2.5 0.5 < 0.1 < 5 36 0.04 0.12

TZMB51 50 52 < 125 < 700 2.5 0.5 < 0.1 < 10 39 0.04 0.12

TZMB56 54.9 57.1 < 135 < 1000 2.5 0.5 < 0.1 < 10 43 0.04 0.12

TZMB62 60.8 63.2 < 150 < 1000 2.5 0.5 < 0.1 < 10 47 0.04 0.12

TZMB68 66.6 69.4 < 200 < 1000 2.5 0.5 < 0.1 < 10 51 0.04 0.12

TZMB75 73.5 76.5 < 250 < 1500 2.5 0.5 < 0.1 < 10 56 0.04 0.12

TZM-Series

Vishay Semiconductors

Document Number 84122

Rev. 1.5, 19-Apr-11

www.vishay.com

For technical questions within your region, please contact one of the following:

DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Typical Characteristics

Tamb = 25 °C, unless otherwise specified

Figure 1. Total Power Dissipation vs. Ambient Temperature

Figure 2. Typical Change of Working Voltage under Operating

Conditions at Tamb = 25°C

Figure 3. Typical Change of Working Voltage vs.

Junction Temperature

0 120 160

100

300

400

500

600

Ptot - Total Power Dissipation (mW)

Tamb - Ambient Temperature (°C)

200

95 9602

200

10 15 20

100

1000

- Voltage Change (mV)

- Z-Voltage (V)

95 9598

Tj = 25 °C

IZ = 5 mA

- 60 60 120 180

0.8

0.9

1.0

1.1

1.2

1.3

Ztn

- Relative Voltage Change

Tj - Junction Temperature (°C)

240

95 9599

VZtn = VZt/VZ (25 °C)

= 10 x 10-4/K

8 x 10-4/K

2 x 10-4/K

6 x 10-4/K

4 x 10-4/K

- 4 x 10-4/K

- 2 x 10-4/K

Figure 4. Temperature Coefficient of VZ vs. Z-Voltage

Figure 5. Diode Capacitance vs. Z-Voltage

Figure 6. Forward Current vs. Forward Voltage

- 5

VZ - Z-Voltage (V)

95 9600

IZ = 5 mA

0 10 203040 50

TKVZ - Temperature Coefficient

of VZ (10-4/K)

10 15

100

150

200

- Diode Capacitance (pF)

- Z-Voltage (V)

95 9601

= 25 °C

= 2 V

0 0.2 0.4 0.6 0.8

0.001

0.01

0.1

100

1.0

95 9605

IF - Forward Current (mA)

VF - Forward Voltage (V)

Tj = 25 °C

TZM-Series

Vishay Semiconductors

Document Number 84122

Rev. 1.5, 19-Apr-11

www.vishay.com

For technical questions within your region, please contact one of the following:

DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Figure 7. Z-Current vs. Z-Voltage

Figure 8. Z-Current vs. Z-Voltage

820

95 9604

100

IZ - Z-Current (mA)

Ptot = 500 mW

Tamb = 25 °C

046 12

VZ - Z-Voltage (V)

15 20 25 30

IZ - Z-Current (mA)

VZ - Z-Voltage (V)

95 9607

Ptot = 500 mW

Tamb = 25 °C

Figure 9. Differential Z-Resistance vs. Z-Voltage

0 101520

100

1000

95 9606

Tj = 25 °C

IZ = 1 mA

5 mA

10 mA

- Z-Voltage (V)

- Differential Z-Resistance (Ω)

Figure 10. Thermal Response

100

1000

Zthp - Thermal Resistance for Pulse Cond. (KW)

tp - Pulse Length (ms) 95 9603

10-1 100101102

tp/T = 0.5

tp/T = 0.2

tp/T = 0.1

tp/T = 0.05

tp/T = 0.02

tp/T = 0.01

Single Pulse RthJA = 300 K/W

T = Tjmax - Tamb

iZM = (- VZ + (VZ

2 + 4rzj x T/Zthp) 1/2)/(2rzj)

TZM-Series

Vishay Semiconductors

Document Number 84122

Rev. 1.5, 19-Apr-11

www.vishay.com

For technical questions within your region, please contact one of the following:

DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Package Dimensions in millimeters (inches): MiniMELF SOD-80

Cathode indification

0.47 (0.019) max.

2.5 (0.098) max. 1.25 (0.49) min.

3.7 (0.146)

3.3 (0.130)

5 (0.197) ref.

2 (0.079) min.

1.6 (0.063)

1.4 (0.055)

Foot print recommendation:

* The gap between plug and glass can

be either on cathode or anode side

Document no.:6.560-5005.01-4

Rev. 8 - Date: 07.June.2006

96 12070

Document Number: 91000 www.vishay.com

Revision: 11-Mar-11 1

Disclaimer

Legal Disclaimer Notice

Vishay

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.