Model PPLIM Light Interface Module DC-Powered Interface for PresencePLUS (R) Lights Features * Low-cost strobe interface between user's hardware and PresencePLUS lights *Separate Strobe Signal inputs: - 5V TTL signal - 8-30V dc signal (switch-selectable current sinking/NPN or current sourcing/PNP) * Two Light Strobe outputs: - 5V "Active Low" (non-inverting) - 5V "Active High" (inverting) * LED indicators for Power and Strobe Signal inputs * Easy-to-adjust 45 screw terminals for electrical wiring * Simple 35 mm DIN-rail-mount or wall-mount configuration Overview Input Terminal Block The model PPLIM PresencePLUS Light Interface Module is a passive DIN-rail-mount or wall-mount module. It enables use of Banner PresencePLUS LED lights with strobe signal sources other than Banner machine vision sensors, for example, high-end vision systems, PLCs, photoelectric sensors, or proximity sensors. Power LED Installation 5V Strobe LED For mounting to a flat surface, unscrew one end cap, slide the DIN clips off of the housing, and replace the end cap. Use the screw-holes in the end caps for mounting to a flat surface. 8-30V Strobe LED NPN/PNP Select Switch PresencePLUS Light Terminal Block Figure 1. Features Printed in USA 07/06 P/N 128190 Models PPLIM.. PresencePLUS Light Interface Module Specifications Input Supply Voltage 24V dc 10% Strobe Output Non-Inverting "Active Low": 5V @ 10 mA max. Inverting "Active High": 5V @ 10 mA max. Adjustments NPN / PNP Select switch is dedicated to "8-30V Strobe" input only. When using "5V Strobe" input, put NPN / PNP Select switch in PNP position. Indicator LEDs Power Green: Power ON 5V Strobe Green: Active 8-30V Strobe Green: Active Construction PCB circuit board; PVC housing, polyamide end caps and DIN rail mounting hardware Environmental Rating IEC IP00: NEMA 1 Connections Terminal Strip: Accepts 12 to 24 gauge wire Operating Conditions Temperature: 0 to +50 C (+32 to +122 F) Max. Relative Humidity: 90% (non-condensing) Weight Approximately 45 grams (0.1 lb.) Dimensions Terminal Block Wiring Tables "Input" Terminal Block 49.5 mm (1.95") 52.5 mm (2.07") 29.5 mm (1.16") 2X 2.7 mm (0.11") 2X R 2.7 mm (R 0.11") 86.4 mm (3.40") 43.2 mm (1.70") 28.7 mm (1.13") 2X 11.8 mm (0.46") 62.6 mm (2.46") 17.5 mm (0.69") Pin Color Description 1 Brown 24V dc 2 Blue OV dc (Common) 3 Black 8-30V Strobe 4 Pink 5V Strobe "PresencePLUS Light" Terminal Block Pin Color Description 1 Brown 24V dc 2 Blue OV dc (Common) 3 White 5V Active low (non-inverting) 4 Yellow 5V Active high (inverting) WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. P/N 128190 Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 * Phone: 763.544.3164 * www.bannerengineering.com * Email: sensors@bannerengineering.com