P www.vishay.com Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors FEATURES * Load life stability at 70 C for 2000 h: 0.1 % under Pn/0.05 % under Pd * Low temperature coefficient down to 5 ppm/C (- 55 C; + 155 C) * Very low noise < - 35 dB and voltage coefficient < 0.01 ppm/V * Wide resistance range: 10 to 76 M depending on size * Tolerances to 0.01 % For low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient, Vishay Sfernice's proven precision thin film wraparound resistors exceed requirements of MIL-PRF-55342G characteristics Y 10 ppm/C (- 55 C; + 155 C) down to 5 ppm/C (- 55 C; + 155 C). * In lot tracking 5 ppm/C * Termination: Thin film technology * Gold plated or pre-tinned terminations over nickel barrier * Short circuits (jumpers) r < 50 mR, I < 2 A, see PZR datasheet (www.vishay.com/doc?53053) * SMD wraparound terminations * Withstand moisture resistance test of AEC-Q200 * Compliant to RoHS Directive 2002/95/EC Notes * Pb containing terminations are not RoHS compliant, exemptions may apply ** Please see document "Vishay Material Category Policy": www.vishay.com/doc?99902 DIMENSIONS in millimeters (inches) A D D B C E E CASE SIZE A B MAX. TOL. + 0.152 (+ 0.006) MIN. TOL. - 0.152 (- 0.006) MAX. TOL. + 0.127 (+ 0.005) MIN. TOL. - 0.127 (- 0.005) D/E C NOMINAL NOMINAL NOMINAL TOLERANCE 0302 0.75 (0.029) 0.60 (0.024) 0.15 (0.006) 0.08 (0.003) 0402 1.00 (0.039) 0.60 (0.024) 0.25 (0.010) 0.1 (0.004) 0505 1.27 (0.005) 1.27 (0.050) 0603 1.52 (0.060) 0.85 (0.033) 0705/0805 1.91 (0.075) 1.27 (0.050) 1005 2.54 (0.100) 1.27 (0.050) 1206 3.06 (0.120) 1.60 (0.063) 1505 3.81 (0.150) 1.32 (0.052) 2010 5.08 (0.200) 2.54 (0.100) 0.5 (0.02) 0.127 (0.005) 0.38 (0.015) 0.13 (0.005) 0.40 (0.016) 0.48 (0.019) Note * Case size 2512 under development. Please consult Vishay Sfernice. Revision: 08-Sep-11 1 Document Number: 53017 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P www.vishay.com Vishay Sfernice SUGGESTED LAND PATTERN (to IPC-7351A) Gmin. Xmax. Zmax. DIMENSIONS (in millimeter) CHIP SIZE Zmax. Gmin. Xmax. 0302 1.30 0.14 0.73 0402 1.55 0.15 0.73 0505 1.82 0.10 1.40 0603 2.37 0.35 0.98 0705/0805 2.76 0.74 1.40 1005 3.39 1.37 1.40 1206 3.91 1.85 1.73 1505 4.66 2.44 1.45 2010 5.93 3.71 2.67 Note * Case size 2512 under development. Please consult Vishay Sfernice. ELECTRICAL SPECIFICATIONS CASE SIZE POWER RATING mW LIMITING ELEMENT VOLTAGE V RESISTANCE RANGE (2) Pn (1) Pd (1) 0302 40 30 25 10 to 750 k 0402 63 40 50 10 to 1.5 M 0505 125 50 50 10 to 4 M 0603 125 100 75 10 to 3.2 M 0705/0805 200 125 150 10 to 10 M 1005 250 125 75 10 to 8.1 M 1206 330 250 200 10 to 35 M 1505 350 175 75 10 to 15 M 2010 1000 500 300 10 to 76 M Notes * Case size 2512 under development. Please consult Vishay Sfernice. (1) Pn = Nominal power - Pd = Derated power intended to improve stability. (2) For ohmic range versus tolerance and TCR see detailed table on next page. Revision: 08-Sep-11 2 Document Number: 53017 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS TEMPERATURE COEFFICIENT Resistance range: 10 to 76 M Resistance tolerance: 0.01 % to 1 % Power dissipation: Pn: 40 mW to 1 W Pd: 40 mW to 500 mW TCR 5 ppm/C (1) 5 ppm/C FILM NiCr (1) Z (0 C; + 70 C) NiCr Y NiCr 10 ppm/C (1) Temperature coefficient: Down to 5 ppm - 55 C; + 155 C CLIMATIC SPECIFICATIONS Operating temp. range: CODE C (- 55 C; + 155 C) - 55 C to + 155 C 25 ppm/C E NiCr 50 ppm/C H NiCr or CrSi 100 ppm/C K NiCr or CrSi Note (1) R > 39 on request for lower values. For temperature up to 230 C, see PHT datasheet (www.vishay.com/doc?53050) POWER DERATING CURVE Substrate: Alumina Technology: Thin film Film: Nickel chromium with mineral passivation or CrSi Protection: Silicone Terminations: B type: SnPb over nickel barrier for solder reflow N type: SnAg over nickel barrier G type: gold over nickel barrier for other applications Rated Power (%) MECHANICAL SPECIFICATIONS 100 80 60 40 20 0 0 20 40 60 70 80 100 120 140 155 Ambient Temperature in C BEST TOLERANCE AND TCR VS. OHMIC VALUE 10 100 0.05 % 250 P2010 3M8 5M 7M5 76M P1505 720K 1M 1M5 15M P1206 1M3 2M 3M5 35M P1005 400K 550K 810K 8M1 P0805 360K 511K 750K 10M P0603 160K 332K 500K 3M2 P0505 187K 260K 400K 4M P0402 67K 100K 150K 1M5 P0302 35K 50K 75K 750K 0.02 % 0.01 % 0.05 % 0.1 % TCR C TCR Z, Y TCR E TCR H, K Revision: 08-Sep-11 3 Document Number: 53017 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P www.vishay.com Vishay Sfernice POPULAR OPTIONS For any option it is recommended to consult Vishay Sfernice for availability first. Option: Enlarged terminations: For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heatsink (see application note: 53048 Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA Arrays, CHP Thick Film) www.vishay.com/doc?53048. Option to order: 0063 (applies to size 1206/1505/2010). DIMENSIONS (Option 0063) in millimeters Bottom view for mounting Uncoatted ceramic A Enlarged termination B F D E A B E D MAX. TOL. + 0.152 MIN. TOL. - 0.152 MAX. TOL. + 0.127 MIN. TOL. - 0.127 MAX. TOL. + 0.13 MIN. TOL. - 0.13 MAX. TOL. + 0.13 MIN. TOL. - 0.13 NOMINAL NOMINAL NOMINAL NOMINAL 1206 3.06 1.60 0.40 1.215 1505 3.81 1.32 2010 5.08 2.54 CASE SIZE 1.59 0.48 F NOMINAL MIN. MAX. 0.63 0.50 0.76 2.25 Note * Case size 2512 under development. Please consult Vishay Sfernice. SUGGESTED LAND PATTERN (Option 0063) Gmin. Xmax. Zmax. CHIP SIZE DIMENSIONS (IN MILLIMETER) Zmax. 1206 3.91 1505 4.66 2010 5.93 Gmin. Xmax. 1.73 0.50 1.45 2.67 Note * Case size 2512 under development. Please consult Vishay Sfernice. Revision: 08-Sep-11 4 Document Number: 53017 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P www.vishay.com Vishay Sfernice Option: Marking Option to order 0013: Marking of ohmic value and tolerance: Sizes: 0805 to 1005: 3 digits marking (according to EIA-96) Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure) Tolerance indicated by a color dot. Option to order 0014: Marking of ohmic value: Sizes: 0805 to 1005: 3 digits marking (according to EIA-96) Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure) No standard marking available for smaller sizes. A price adder will apply to the unit price of the parts for options 0013 and 0014. Option: AEC-Q200 Moisture resistance Option to Order 0058: Specific production process to withstand 85 C/85 % at Pn/10 PACKAGING PACKAGING RULES ESD packaging available: waffle-pack, and plastic tape and reel (low conductivity). Paper tape available upon request (ESD only) (for size 0603, 0805, and 1206). Waffle Pack Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. To get "not stacked up" waffle pack in case of ordered quantity > maximum number of pieces per package: Please consult Vishay Sfernice for specific ordering code. Tape and Reel Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered is between the MOQ and the maximum reel capacity, only one reel is provided. When several reels are needed for ordered quantity within MOQ and maximum reel capacity: Please consult Vishay Sfernice for specific ordering code. SIZE MOQ 0302 0402 0505 0603 0805 0705 1005 1206 1505 2010 NUMBER OF PIECES PER PACKAGE TAPE TAPE AND REEL WAFFLE PACK WIDTH 2" x 2" MIN. MAX. 5000 100 100 100 221 140 60 8 mm 4000 100 2000 8 mm PERFORMANCE TESTS Thermal shock Short time overload Low temperature operation Resistance to solder heat Moisture resistance High temperature Load life CONDITIONS MIL-PRF-55342G MIL-STD-202 F-Method 107 F MIL-PRF-55342G PARA 3.10.4.7.5 MIL-PRF-55342G PARA 3.9 and 4.7.4 MIL-PRF-55342G PARA 3.12, 4.7.7, 4.7.1.2 MIL-PRF-55342G PARA 3.13 and 4.7.8 MIL-STD-202 F-Method 106 E CECC 56 days/40 C/93 % RH AEC-Q200 (2) 85 C/85 % RH/Pn/10 1000 h MIL-PRF-55342G PARA 3.11 and 4.7.6 MIL-PRF-55342G 2000 h Pn at 70 C MIL-STD-202 F-Method 108 A MIL OR CECC REQUIREMENTS TYPICAL PERFORMANCES 0.05 % 0.02 % 0.05 % 0.01 % 0.05 % 0.01 % 0.05 % 0.03 % 0.10 % 0.01 % 0.10 % 0.01 % 0.5 % + 0.05 Max. < 0.3 % + 0.05 0.05 % 0.05 % 0.5 % 0.10 % (1) Notes (1) 0.05 % under Pd (2) Option to order Revision: 08-Sep-11 5 Document Number: 53017 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P www.vishay.com Vishay Sfernice Maximum permissible pulse load Pi max. for single pulse Permissible Pulse Power P (W) 100 P2512 P2010 P1206 P0805 P0603 P0402 10 1 0.1 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Duration t (s) Energy for single pulse 100 Permissible Pulse Energy (J) 10 1 0.1 0.01 P2512 P2010 P1206 P0805 P0603 P0402 0.001 0.0001 0.00001 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Duration t (s) Maximum permissible pulse voltage Ui max. Permissible Pulse Voltage (V) 10 000 P2512 P2010 P1206 P0805 P0603 P0402 1000 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Duration t (s) Revision: 08-Sep-11 6 Document Number: 53017 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P www.vishay.com Vishay Sfernice Maximum permissible pulse load Pi max. Permissible Pulse Power P (W) 100 P2512 P2010 P1206 P0805 P0603 P0402 10 1 0.1 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Duration t (s) 1.2/50 s lightning surge Test Voltage (V) 10 000 1000 100 P2512 P1206 P0805 P0603 10 10 100 1000 10 000 100 000 Resistor Value () 10/700 s lightning surge Test Voltage (V) 10 000 1000 100 P1206 P0805 P0603 10 10 100 1000 10 000 100 000 Resistor Value () Revision: 08-Sep-11 7 Document Number: 53017 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P www.vishay.com Vishay Sfernice GLOBAL PART NUMBER INFORMATION New Global Part Numbering: P0505Y1003BBT0999 P 0 5 0 5 Y 1 0 0 3 B B T 0 9 9 9 GLOBAL MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION P 0302 0402 0505 0603 0705 0805 1005 1206 1505 2010 K= 100 ppm/C H = 50 ppm/C E = 25 ppm/C Y = 10 ppm/C Z = 5 ppm (0.70 C) C = 5 ppm (- 55 C; + 155 C) The first three digits are significant figures and the last digit specifies the number of zeros to follow, R designates decimal point L = 0.01 % P = 0.02 % W = 0.05 % B = 0.1 % C = 0.25 % D = 0.5 % F=1% G=2% J=5% B: SnPb over nickel barrier N: SnAg over nickel barrier G: Gold over nickel barrier Blank = Waffle pack T = Tape (1) PT = Paper tape (2) Leave blank if no option 10R0 = 10 3901 = 3900 1004 = 1 M B: Lead bearing version N and G: Lead (Pb)-free/RoHS version Historical Part Number example: P 0505 Y 1003 B B TR R0999 e2 P 0505 Y 1003 B B TR R0999 e2 HISTORICAL MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION RoHS 0302 0402 0505 0603 0705 0805 1005 1206 1505 2010 K= 100 ppm/C H = 50 ppm/C E = 25 ppm/C Y = 10 ppm/C Z = 5 ppm (0.70 C) C = 5 ppm (- 55 C; + 155 C) The first three digits are significant figures and the last digit specifies the number of zeros to follow, R designates decimal point L = 0.01 % P = 0.02 % W = 0.05 % B = 0.1 % C = 0.25 % D = 0.5 % F=1% G=2% J=5% B: SnPb over nickel barrier N: SnAg over nickel barrier G: Gold over nickel barrier Blank = Waffle pack TR = Tape (1) Leave blank if no option e2: Tin/silver e4: Gold Blank: SnPb P B: Lead bearing version N and G: Lead (Pb)-free/RoHS version 10R0 = 10 3901 = 3900 1004 = 1 M Notes (1) For specific quantity of parts per packaging please consult Vishay Sfernice. (2) For paper tape please consult Vishay Sfernice (0603, 0805, and 1206 only). QUICK PROTOTYPING Vishay Sfernice can offer quick prototyping service in 3 weeks production time for most popular case sizes: 0603, 0805, 1206 (Best tolerance: 0.05 %, best TCR: 10 ppm/C) - Premium will apply - Check availability PTRIM Chips ready to be trimmed available. Please consult Vishay Sfernice. Notes * For CECC qualified, see RV datasheet (www.vishay.com/doc?60022) * For ESCC qualified, see PHR datasheet (www.vishay.com/doc?53037) or PFRR datasheet (www.vishay.com/doc?53046) * For High Temperature (230 C), see PHT datasheet (www.vishay.com/doc?53050) * For Strap (0 ), see PZR datasheet (www.vishay.com/doc?53053) Revision: 08-Sep-11 8 Document Number: 53017 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1