Cable Group Listing
60
Amphenol® RF: 800-627-7100
60
Amphenol® RF: 800-627-7100
SMA Connectors
Description
SMA is an acronym for SubMiniature version A and was developed in the 1960’s.
It uses a threaded interface. 50 Ω SMA connectors are semi-precision, subminiature
units that provide excellent electrical performance from DC to 18 GHz. These high-per-
formance connectors are compact in size and mechanically have outstanding durability.
For phase array radar, test equipment, ILS landing systems and other instrumenta-
tion using phase matching techniques, these SMA connectors for semi-rigid coaxial
cables and the SMA Plug-to-Jack adapter offer a precise and simple means of phase
adjustment for microwave devices. Built in accordance with MIL-C-39012 and CECC
22110/111, SMA connectors can be mated with all connectors that meet these interface
specifications, regardless of manufacturer.
SMA is available both in Standard and Reverse Polarity. Reverse polarity is a keying
system accomplished with a reverse interface, and ensures that reverse polarity inter-
face connectors do not mate with standard interface connectors. Amphenol accomplish-
es this by inserting female contacts into plugs and male contacts into jacks.
Features/Benefits
•BroadbandperformanceDCto18GHzwithlowreectionstainlesssteel
construction and ¼-36 threaded coupling.
•BrassSMAavailableinnickelorgoldplatingwhichprovidesapproximately
30% cost reduction with 100 mating cycles.
•Availablefor.085”and.141”diametersemi-rigidcablesandallthestandard
flexible cables including double shielded RG-316.
•PhaseAdjustableSMAconnectorsprovideeaseofmechanicalscrewadjustments.
Applications
•BaseStations •ProcessControls
•CableAssemblies •PC/LAN
•Instrumentation •Telecom
•Mil/Aero
SMA
SMA
Amphenol® RF
61
Amphenol® RF: 800-627-7100 SMA
SMA
Stainless Steel SMA Specifications
Electrical
Impedance 50 Ω
Frequency range DC - 18 GHz (semi-rigid cable)
DC - 12.4 GHz (flexible cable)
RF-leakage 100 dB-f minimum @ 3 GHz (semi-rigid cable)
60 dB minimum @ 3 GHz (flexible cable)
Voltage rating (at sea level) ≤ 500 Vrms (semi-rigid, depending on cable)
≤ 335 Vrms (flexible, depending on cable)
Contact resistance center contact: ≤ 2 mΩ
outer contact: ≤ 2 mΩ
braid to body: ≤ 0.5 mΩ
Insulation resistance 5,000 MΩ minimum
Insertion loss maximum dB maximum = .03 √ f(GHz)
Dielectric withstanding voltage 1,500 Vrms (semi-rigid cable, at sea level)
1,000 Vrms (flexible cable, at sea level)
Mechanical
Mating .250-36 threaded coupling
Coupling torque 15 in-lbs (22 / 170 N-cm) max, recom. 7 / 10 in-lbs (80 / 110
N-cm)
Coupling nut retention force 100 in-lbs (300 N-cm) min.
Braid/Jacket cable affixment Crimp and solder types
Center conductor cable affixment Solder, unless noted otherwise
Captivated contacts All types, unless noted otherwise
Durability (matings) 500 cycles minimum
Environmental
Temperature range -65°C to +165°C
Weatherproof crimp: w/ heat shrink tubing, solder: w/ gasket
Thermal shock MIL-STD-202, method 107, cond. B
Moisture resistance MIL-STD-202, method 106 (except step 7b)
Corrosion MIL-STD-202, method 101, cond. B
Vibration MIL-STD-202, method 204, cond. D
Mechanical shock MIL-STD-202, method 213, cond. 1
Altitude MIL-STD-202, method 105, cond. C (n/a 70,000 ft)
Note: These characteristics are typical but may not apply to all connectors.
62
Amphenol® RF: 800-627-7100
Stainless Steel SMA Specifications (continued)
Material
Center contact Beryllium copper, gold plated
Crimp ferrule Copper or brass
Other metal parts Non-magnetic stainless steel (except as noted)
Plated Gold or nickel
Insulator PTFE (ASTM D1457)
Gasket Silicone rubber (MIL-R-5847 and ZZ-R-765)
Military
MIL-C-39012 where applicable
MIL-C-83517 SMA where applicable
Plug Jack
6.35/6.73
ø.250 MIN
6.53/6.59
ø.1808 MAX
.130 MIN
.015/.045
2.56/3.63
.135 MAX
.250-36UNS-2B
.050 MIN
.015 MIN
.000 MAX
.015 MAX
0.90
.1.91/2.56
100 MAX
.010 MAX
PROJECTION
ø
RECESS
.000 MIN
0.96
ø
ø.051/.049
.000 MAX
.000/.010
.115
ø.1810 MIN
.216
.015/.045
.074/.078
.170 MIN
.218 MIN
FULL THD
CONTACT
REF PLANE
PROJECTION
ø.208
.250-36UNS-2A
SMA
SMA
63
Amphenol® RF: 800-627-7100
Brass SMA Specifications
Electrical
Impedance 50 Ω
Frequency range DC - 18 GHz (semi-rigid cable)
DC - 12.4 GHz (flexible cable)
RF-leakage 100 dB-f minimum @ 3 GHz (semi-rigid cable)
60 dB minimum @ 3 GHz (flexible cable)
Voltage rating (at sea level) ≤ 500 Vrms (semi-rigid, depending on cable)
≤ 335 Vrms (flexible, depending on cable)
Contact resistance center contact: ≤ 2 mΩ
outer contact: ≤ 2 mΩ
braid to body: ≤ 0.5 mΩ
Insulation resistance 5,000 MΩ minimum
Insertion loss maximum dB maximum = .06 √ f(GHz)
Dielectric withstanding voltage 1,500 Vrms (semi-rigid cable, at sea level)
1,000 Vrms (flexible cable, at sea level)
Mechanical
Mating .250-36 threaded coupling
Coupling torque, min./max. max. = 5.2 in-lbs (60 N-cm), recommended = 4 in-lbs (45 N-cm)
Coupling nut retention force 100 in-lbs (300 N-cm) min.
Braid/Jacket cable affixment Crimp and solder types
Center conductor cable affixment Solder, unless noted otherwise
Captivated contacts All types, unless noted otherwise
Durability (matings) 100 cycles minimum
Environmental
Temperature range -65°C to +165°C
Weatherproof crimp: w/ heat shrink tubing, solder: w/ gasket
Thermal shock MIL-STD-202, method 107, cond. B
Moisture resistance MIL-STD-202, method 106 (except step 7b)
Corrosion MIL-STD-202, method 101, cond. B
Vibration MIL-STD-202, method 204, cond. D
Mechanical shock MIL-STD-202, method 213, cond. 1
Altitude MIL-STD-202, method 105, cond. C (n/a 70,000 ft)
Material
Male contact Brass, gold plated
Female contact Beryllium copper, gold plated
Crimp ferrule Copper or brass
Other metal parts Brass (except as noted), gold or nickel plated
Insulator PTFE (ASTM D1457)
Gasket Silicone rubber (MIL-R-5847 and ZZ-R-765)
Military
MIL-C-39012 where applicable
MIL-C-83517 SMA where applicable
Note: These characteristics are typical but may not apply to all connectors.
SMA
SMA
64
Amphenol® RF: 800-627-7100
SMA
SMA
Brass SMA Specifications (continued)
Plug Jack
6.35/6.73
ø.250 MIN
6.53/6.59
ø.1808 MAX
.130 MIN
.015/.045
2.56/3.63
.135 MAX
.250-36UNS-2B
.050 MIN
.015 MIN
.000 MAX
.015 MAX
0.90
.1.91/2.56
100 MAX
.010 MAX
PROJECTION
ø
RECESS
.000 MIN
0.96
ø
ø.051/.049
.000 MAX
.000/.010
.115
ø.1810 MIN
.216
.015/.045
.074/.078
.170 MIN
.218 MIN
FULL THD
CONTACT
REF PLANE
PROJECTION
ø.208
.250-36UNS-2A
65
Amphenol® RF: 800-627-7100 SMA
SMA
Reverse Polarity SMA Specifications
Electrical
Impedance 50 Ω
Frequency range DC - 18 GHz (semi-rigid cable)
DC - 12.4 GHz (flexible cable)
RF-leakage 100 dB-f minimum @ 3 GHz (semi-rigid cable)
60 dB minimum @ 3 GHz (flexible cable)
Voltage rating (at sea level) ≤ 500 Vrms (semi-rigid, depending on cable)
≤ 335 Vrms (flexible, depending on cable)
Contact resistance center contact: ≤ 2 mΩ
outer contact: ≤ 2 mΩ
braid to body: ≤ 0.5 mΩ
Insulation resistance 5,000 MΩ minimum
Dielectric withstanding voltage 1,500 Vrms (semi-rigid cable, at sea level)
1,000 Vrms (flexible cable, at sea level)
Mechanical
Mating .250-36 threaded coupling
Coupling nut retention force 100 in-lbs (300 N-cm) min.
Braid/Jacket cable affixment Crimp and solder types
Center conductor cable affixment Solder, unless noted otherwise
Captivated contacts All types, unless noted otherwise
Durability (matings) 100 cycles min. (brass), 500 cycles min. (stainless steel)
Environmental
Temperature range -65°C to +165°C
Weatherproof crimp: w/ heat shrink tubing, solder: w/ gasket
Thermal shock MIL-STD-202, method 107, cond. B
Moisture resistance MIL-STD-202, method 106 (except step 7b)
Corrosion MIL-STD-202, method 101, cond. B
Vibration MIL-STD-202, method 204, cond. D
Mechanical shock MIL-STD-202, method 213, cond. 1
Altitude MIL-STD-202, method 105, cond. C (n/a 70,000 ft)
Material
Center contact Beryllium copper, gold plated
Crimp ferrule Copper or brass
Other metal parts Non-magnetic stainless steel or brass, gold, silver or nickel plated
Insulator PTFE (ASTM D1457)
Gasket Silicone rubber (MIL-R-5847 and ZZ-R-765)
Military
MIL-C-39012 where applicable
MIL-C-83517 SMA where applicable
Plug Jack
Note: These characteristics are typical but may not apply to all connectors.
66
Amphenol® RF: 800-627-7100
Cable Connectors
Straight Plugs for Flexible Cable
Cable Plating Termination
Group Part Number Body Material Body Contact Body Contact
B 901-9601-3 Stainless Steel Gold Gold Crimp Solder
B 901-9601-3SF Stainless Steel Passivated Gold Crimp Solder
B 901-9501-3 Stainless Steel Gold Gold Crimp Solder
B 901-128-11 (QPL) Stainless Steel Gold Gold Clamp Solder
B 901-9511-3 Stainless Steel Gold Gold Crimp Solder
B 901-9511-3SF Stainless Steel Passivated Gold Crimp Solder
B 901-9511-12SF Stainless Steel Passivated Gold Crimp Solder
B 901-9511-3SFC Stainless Steel Passivated Gold Solder Crimp
B 901-9511-12SFC Stainless Steel Passivated Gold Solder Crimp
B 901-155-12 (QPL) Stainless Steel Gold Gold Crimp Solder
B 901-155-16 (QPL) Stainless Steel Gold Gold Crimp Solder
B2 901-9877-RFX Brass Nickel Gold Crimp Solder
B 901-9916 Brass Gold Gold Crimp Solder
C 901-103 Stainless Steel Gold Gold Clamp Solder
C 901-103-11 (QPL) Stainless Steel Gold Gold Clamp Solder
C 901-9511-2 Stainless Steel Gold Gold Crimp Solder
C 901-9511-2SF Stainless Steel Gold Gold Crimp Solder
C 901-9870 Brass Gold Gold Crimp Solder
C 901-9876-RFX Brass Nickel Gold Crimp Solder
C 901-9871 Brass Gold Gold Crimp Solder
C1 901-9601-1SF Stainless Steel Passivated Gold Crimp Solder
C1 901-9511-1 Stainless Steel Gold Gold Crimp Solder
C1 901-9511-1SF Stainless Steel Passivated Gold Crimp Crimp
C1 901-9511-1SFC Stainless Steel Passivated Gold Crimp Crimp
C1 901-101-15 (QPL) Stainless Steel Gold Gold Crimp Crimp
C2 901-10010-RFX Brass Gold Gold Crimp Solder
C2 901-10012 Stainless Steel Passivated Gold Crimp Solder
G2 901-10009-RFX Brass Gold Gold Crimp Solder
G2 901-10011 Stainless Steel Passivated Gold Crimp Solder
SMA
SMA
67
Amphenol® RF: 800-627-7100 SMA
Straight Plugs for Semi-Rigid Cable
Cable Plating Termination
Group Part Number Body Material Body Contact Body & Contact
L 901-9201-1A Stainless Steel Gold Gold Solder
L 901-9201-1ASF Stainless Steel Gold Gold Solder
L 901-9808 Stainless Steel Gold Gold Solder
L 901-9808-1 Stainless Steel Gold Gold Solder
L 901-9808-2 Stainless Steel Gold Gold Solder
L 901-9868-RFX Brass Gold Gold Solder
L2 901-9201-2A Stainless Steel Gold Gold Solder
L2 901-9201-2ASF Stainless Steel Gold Gold Solder
L2 901-9723 Stainless Steel Gold Gold Solder
L2 901-9723-10 Stainless Steel Gold Gold Solder
L2 901-9805-HP Stainless Steel Gold Gold Solder
L2 901-9867-RFX Brass Gold Gold Solder
Angle Plugs for Flexible Cable
Cable Plating Termination
Group Part Number Body Material Body Contact Body Contact
B 901-368-12 (QPL) Stainless Steel Gold Gold Solder Solder
B 901-9531-3 Stainless Steel Gold Gold Crimp Solder
B 901-9521-3 Stainless Steel Gold Gold Crimp Solder
B 901-9531-3SF Stainless Steel Passivated Gold Crimp Crimp
B 901-9872 Brass Gold Gold Crimp Solder
B 901-9881-RFX Brass Nickel Gold Crimp Solder
B2 901-9531-12 Stainless Steel Gold Gold Crimp Crimp
B2 901-9531-12SF Stainless Steel Passivated Gold Crimp Solder
C 901-9531-2 Stainless Steel Gold Gold Crimp Solder
C 901-9531-2SF Stainless Steel Passivated Gold Solder Crimp
C 901-9873 Brass Gold Gold Crimp Solder
C 901-9880-RFX Brass Nickel Gold Crimp Solder
C1 901-148-15 (QPL) Stainless Steel Gold Gold Solder Solder
C1 901-9531-1 Stainless Steel Gold Gold Crimp Solder
C1 901-9531-1SF Stainless Steel Passivated Gold Crimp Solder
C1 901-9874 Brass Gold Gold Crimp Solder
G2 901-10014 Stainless Steel Passivated Gold Solder Crimp
SMA
68
Amphenol® RF: 800-627-7100
SMA
SMA
Cable Connectors (continued)
Angle Plugs for Semi-Rigid Cable
Cable Plating Termination
Group Part Number Body Material Body Contact Body & Contact
L 901-9221-1A Stainless Steel Gold Gold Solder
L 901-9221-1ASF Stainless Steel Gold Gold Solder
L2 901-9221-2A Stainless Steel Gold Gold Solder
L2 901-9221-2ASF Stainless Steel Gold Gold Solder
Straight Jacks
Cable Plating Termination
Group Part Number Body Material Body Contact Body Contact
B 901-9602-3 Stainless Steel Gold Gold Crimp Solder
B 901-9602-3SF Stainless Steel Passivated Gold Crimp Solder
B2 901-9602-12SF Stainless Steel Passivated Gold Crimp Solder
C1 901-9602-1 Stainless Steel Gold Gold Crimp Solder
C1 901-9602-1SF Stainless Steel Passivated Gold Crimp Solder
L 901-9202-1A Stainless Steel Gold Gold Solder Solder
L 901-9704 Stainless Steel Gold Gold Solder Captivated
L2 901-9202-2A Stainless Steel Gold Gold Solder Solder
Bulkhead Jacks
Cable Plating Termination
Group Part Number Body Material Body Contact Body Contact
B 901-9610-3 Stainless Steel Gold Gold Crimp Solder
B 901-9610-3SF Stainless Steel Passivated Gold Crimp Solder
B 901-10021-3SF Stainless Steel Passivated Gold Crimp Solder
B 901-9875 Brass Gold Gold Crimp Solder
B 901-9879-RFX Brass Nickel Gold Crimp Solder
B 901-10013-RFX Brass Nickel Gold Crimp Solder
B2 901-9610-12SF Stainless Steel Passivated Gold Crimp Solder
B2 901-10021-12SF Stainless Steel Passivated Gold Crimp Solder
C1 901-9610-1SF Stainless Steel Passivated Gold Crimp Solder
C1 901-10021-1SF Stainless Steel Passivated Gold Crimp Solder
G2 901-10015 Stainless Steel Passivated Gold Crimp Solder
L 901-9210-1 Stainless Steel Gold Gold Solder Solder
L2 901-9210-2 Stainless Steel Gold Gold Solder Solder
69
Amphenol® RF: 800-627-7100 SMA
Receptacles
Straight Bulkhead Jacks
Plating
Part Number Body Material Body Contact Terminal Type Description
901-9911 Stainless Steel Passivated Gold Blunt Post Front Mount, .050 Pin
901-9211 Stainless Steel Gold Gold Solder Cup Rear Mount/Hex Flange
901-9220 Stainless Steel Gold Gold Blunt Post Front or Rear Mount
901-9841 Stainless Steel Gold Gold Post Front Mount
901-9856 Stainless Steel Passivated Gold Slot Press Fit
901-9023 Stainless Steel Passivated Gold Socket Front or Rear Mount (launcher)
Straight Panel Plugs: 4-Hole Flange
Plating
Part Number Body Material Body Contact Terminal Type
901-9214-CC Stainless Steel Gold Gold Blunt Post/.158(4.0) Long
901-9767 Stainless Steel Passivated Gold Blunt Post/.115(2.9) Long
Straight Panel Jacks: 4-Hole Flange
Plating
Part Number Body Material Body Contact Terminal Type
901-9215 Stainless Steel Gold Gold Solder Cup .200” (5.1mm) Long
901-9758 Stainless Steel Passivated Gold Blunt Post .115” (2.9mm) Long
901-9204-CCSF Stainless Steel Passivated Gold Blunt Post .205” dielectric + .060”
center conductor behind flange
901-9839 Stainless Steel Passivated Gold Blunt Post .06” dielectric + .120”
center conductor behind flange
901-9789 Stainless Steel Passivated Gold Blunt Post .590” dielectric + .117”
center conductor behind flange
901-9804-1 Stainless Steel Passivated Gold Blunt Post, Solder Dipped .010 dia
Straight Panel Jacks: 2-Hole Flange
Plating
Part Number Body Material Body Contact Terminal Type
901-9244-1 Stainless Steel Gold Gold Slot .025” (0.6mm) wide
901-9244-1SF Stainless Steel Passivated Gold Slot .025” (0.6mm) wide
901-9814 Stainless Steel Passivated Gold Socket (Flush)
901-9770 Stainless Steel Passivated Gold Socket (Extended Dielectric)
SMA
70
Amphenol® RF: 800-627-7100
SMA
SMA
Receptacles (continued)
Panel Jacks
Plating
Part Number Body Material Body Contact Terminal Type
901-9893-RFX Brass Nickel Gold Solder Cup
901-9892-RFX Brass Nickel Gold Solder Cup
901-9891-RFX Brass Nickel Gold Blunt Post
901-9887-RFX Brass Nickel Gold Blunt Post
Bulkhead Jacks
Plating
Part Number Body Material Body Contact Terminal Type Description
901-9889-RFX Brass Nickel Gold Solder Cup Front Mount
901-9890-RFX Brass Nickel Gold Solder Cup Rear Mount
Printed Circuit Board Connectors
Straight Plugs
Plating
Part Number Body Material Body Contact Terminal Type Description
901-9895-RFX Brass Gold Gold Thru-Hole Four Legs
Angle Plugs
Plating
Part Number Body Material Body Contact Terminal Type Description
901-9894-RFX Brass Gold Gold Thru-Hole Four Legs
Straight Jacks
Plating
Part Number Body Material Body Contact Terminal Type Description
901-144-8RFX Brass Gold Gold Thru-Hole Four Legs
901-144 Stainless Steel Gold Gold Thru-Hole Four Legs
901-144-2 Stainless Steel Gold Gold Thru-Hole Four Legs
901-144-3 Stainless Steel Gold Gold Thru-Hole Four Legs
901-144-4 Stainless Steel Gold Gold Thru-Hole Four Legs
71
Amphenol® RF: 800-627-7100 SMA
Printed Circuit Board Connectors (continued)
Angle Jacks
Plating
Part Number Body Material Body Contact Terminal Type Description
901-143-6RFX Brass Gold Gold Thru-Hole Four Legs
901-143 Stainless Steel Gold Gold Thru-Hole Four Legs
901-143-3 Stainless Steel Gold Gold Thru-Hole Four Legs
901-143-4 Stainless Steel Gold Gold Thru-Hole Four Legs
Edge Mount Jacks
Plating
Part Number Body Material Body Contact Terminal Type
901-9850 Brass Nickel Gold Blunt Post
901-10003 Brass Gold Gold Blunt Post
901-10019 Brass Gold Gold Blunt Post
Reverse Polarity Cable Connectors
Straight Plugs
Cable Plating Termination
Group Part Number Body Material Body Contact Body Contact
B 901-9852 Brass Nickel Gold Crimp Solder
C1 901-9884 Stainless Steel Passivated Gold Crimp Solder
Angle Plugs
Cable Plating Termination
Group Part Number Body Material Body Contact Body Contact
C1 901-9908 Stainless Steel Passivated Gold Crimp Solder
SMA
901-10110 Brass Gold Gold Tab
901-10111 Brass Gold Gold Tab
901-10044-4RFX Brass Gold Gold Tab
901-10044-6RFX Brass Gold Gold Blunt Post
901-10186 Brass Gold Gold Blunt Post
901-1004-3RFX Brass Gold Gold Tab
901-1004-2RFX Brass Gold Gold Blunt Post
901-1004-1RFX Brass Gold Gold Blunt Post
Straight Press Fit Jacks
Plating
Part Number Body Material Body Contact Terminal Type
901-144-PFD Brass Nickel Gold Compliant Pin
901-144-PF8 Brass Gold Gold Blunt Post
72
Amphenol® RF: 800-627-7100
Reverse Polarity Cable Connectors (continued)
Straight Bulkhead Jacks
Cable Plating Termination
Group Part Number Body Material Body Contact Body Contact
A 901-9990 Stainless Steel Passivated Gold Crimp Solder
B 901-9863 Stainless Steel Passivated Gold Crimp Solder
L 901-9857 Stainless Steel Passivated Gold Crimp Solder
Reverse Polarity Printed Circuit Board Connectors
Angle Jacks
Plating
Part Number Body Material Body Contact Description
901-9865 Stainless Steel Gold Gold Post Terminal
Edge Mount Jacks
Plating
Part Number Body Material Body Contact Description
901-9864 Brass Gold Gold Post Terminal
SMA
SMA
Adapters
In-Series Adapters
Plating
Part Number Body Material Body Contact Description
901-9217 Stainless Steel Gold Gold Straight Jack-Jack
901-9217-SF Stainless Steel Passivated Gold Straight Jack-Jack
901-9216 Stainless Steel Gold Gold Straight Plug-Jack
901-9216-SF Stainless Steel Passivated Gold Straight Plug-Jack
901-9218 Stainless Steel Gold Gold Straight Plug-Plug
901-9218-SF Stainless Steel Passivated Gold Straight Plug-Plug
901-125-11 Stainless Steel Gold Gold Angle Plug-Jack
901-125-11SF
(QPL)
Stainless Steel Passivated Gold Angle Plug-Jack
In-Series T-Adapters
Plating
Part Number Body Material Body Contact Description
901-178 Brass Gold Gold Jack-Jack-Jack
901-382-1 Brass Gold Gold Jack-Jack-Jack
In-Series Bulkhead Adapters
Plating
Part Number Body Material Body Contact Description
901-9209-A Brass Gold Gold Jack-Jack Front or Rear Mount
901-9209-ASF Brass Gold Gold Jack-Jack Front or Rear Mount
73
Notes
SMA
74
Cable Group Listing
Cable Group Cable Type
ARG-178, 196
BRG-174, 188A, 316, Belden 7805
B1 RG-179, 187, Belden 9221
B2 RD-188/U, RD-316/U
B3 RD-179/U, AT&T 19224L2
C RG-58, 58A, 58C, 141, 303, LMR195, Belden 7806A, 9907
C1 RG-55, 142, 223, 400
C2 LMR200, Belden 7807A
DRG-58/U Plenum, Thinnet, RG-122/U, Belden 88240, 89907
ERG-59, 62, 140, 210, Belden 8241, 8263, 8279, 9209
E1 RG-59/U 20 AWG center conductor, Belden 1426A, 1505A, 9100, 9278
E2 RD-59/U, Belden 8281, 9141, 9231
E3 RG-59/U Quad Shield, Belden 1152A
FRG-59/U Plenum, Belden 1560A, 9259, 82259, 89259, 88241
F1 RG-59/U Plenum 20 AWG center conductor, Belden 82108
G1 RG-6, 143, 212
G2 8X, LMR240, Belden 7808A, 9258
G3 LMR400, Belden 7810A, 8214, 9913
G4 RG-8, 8A, 9, 87A, 213, 214, 225, 393
G5 RD-6/U
HRG-11
H1 Belden 1694A, 9248
H2 Belden 1859A, 7731, 8213, 9292
H3 RG-54A/U
IAT&T 734A, Belden 1505A
I2 AT&T 735A, Belden 735A1
JQuad 59 headend cable
KLMR600
K2 Belden 1695A
K3 RG-122, 180, 195, Belden 1855, 1865A, 8218
L.141 semi-rigid, RG-402/U
L2 .085, .086, .087 semi-rigid, RG-405/U
L3 .250 semi-rigid
L4 .047 semi-rigid, Belden 1674
M1/2 inch annular corrugated
M1 1 1/4 inch annular corrugated
M2 1 5/8 inch annular corrugated
M3 7/8 inch annular corrugated
N1/4 Helical
N1 3/8 Helical
N2 1/2 Helical
N3 7/8 inch SFC
P1 .81 mm OD micro-cable
P2 1.13 mm OD micro-cable, TCB-068
P3 1.32 mm OD micro-cable
P4 1.37 mm OD micro-cable