DATA SHEET PHOTOCOUPLER PS2505-1,-2,-4, PS2505L-1,-2,-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES -NEPOC TM Series- DESCRIPTION The PS2505-1, -2, -4 and PS2505L-1, -2, -4 are optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor. The PS2505-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2505L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES * AC input response * High isolation voltage (BV = 5 000 Vr.m.s.) * High collector to emitter voltage (VCEO = 80 V) * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Ordering number of tape product: PS2505L-1-E3, E4, F3, F4, PS2505L-2-E3, E4 * Safety standards * UL approved: File No. E72422 (S) APPLICATIONS * Power supply * Telephone/FAX. * FA/OA equipment * Programmable logic controller The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P10958EJ7V0DS00 (7th edition) Date Published March 2001 NS CP(K) Printed in Japan The mark * shows major revised points. (c) 1988, 2001 PS2505-1,-2,-4,PS2505L-1,-2,-4 PACKAGE DIMENSIONS (UNIT : mm) DIP Type (New package) 2 7.62 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 16 15 14 13 12 11 10 9 6.5 +0.7 -0.5 1 TOP VIEW 19.80.5 1 2 7.62 3.50.3 6.5 +0.7 -0.5 3 3.50.3 3.20.4 4.150.4 4 0 to 15 +0.1 0.25 -0.05 1.250.15 PS2505-4 TOP VIEW 3.20.4 4.150.4 PS2505-1 4.60.35 0.500.10 0.25 M 4 5 6 7 8 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 0 to 15 +0.1 0.25 -0.05 0.500.10 1.250.15 3 0.25 M 2.54 2.54 Caution New package 1-ch, 4-ch only DIP Type 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 0 to 15 +0.1 0.25 -0.05 1.250.15 8 1 0.500.10 1.250.15 0.500.10 0.25 M TOP VIEW 7 6 5 1, 3. Anode, Cathode 2, 4. Cathode, Anode 5, 7. Emitter 6, 8. Collector 6.5 +0.7 -0.5 2 7.62 9.70.5 2 3 4 7.62 3.50.3 6.5 +0.7 -0.5 3 3.50.3 3.30.5 4.150.4 1 PS2505-2 TOP VIEW 4 3.30.5 4.150.4 PS2505-1 4.60.5 0 to 15 +0.1 0.25 -0.05 0.25 M 2.54 2.54 PS2505-4 TOP VIEW 16 15 14 13 12 11 10 9 6.5 +0.7 -0.5 19.80.5 1 2 3.50.3 3.30.5 4.150.4 7.62 0.500.10 1.250.15 2.54 2 0 to 15 +0.1 0.25 -0.05 0.25 M Data Sheet P10958EJ7V0DS 3 4 5 6 7 8 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector PS2505-1,-2,-4,PS2505L-1,-2,-4 Lead Bending Type (New package) PS2505L-1 PS2505L-4 TOP VIEW 16 15 14 13 12 11 10 9 TOP VIEW 2 3.50.3 0.1 +0.1 -0.05 3.50.3 0.90.25 9.600.4 1.250.15 0.25 M 2.54 1 2 3 4 5 6 7 8 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 0.1 +0.1 -0.05 1 19.80.5 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 0.25 +0.1 -0.05 3 6.5 +0.7 -0.5 4 0.25 +0.1 -0.05 6.5 +0.7 -0.5 4.60.35 0.90.25 9.600.4 1.250.15 0.25 M 0.15 2.54 0.15 Caution New package 1-ch, 4-ch only Lead Bending Type PS2505L-2 PS2505L-1 TOP VIEW 2 0.90.25 9.600.4 1.250.15 0.25 M 7 6 5 1, 3. Anode, Cathode 2, 4. Cathode, Anode 5, 7. Emitter 6, 8. Collector 1 1.250.15 0.25 M 2 3 4 0.15 2.54 0.90.25 9.600.4 0.15 PS2505L-4 TOP VIEW 16 15 14 13 12 11 10 9 1.250.15 0.25 M 2.54 0.15 1 2 3 4 5 6 7 8 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 0.1 +0.1 -0.05 0.25 +0.1 -0.05 6.5 +0.7 -0.5 19.80.5 3.50.3 2.54 8 3.50.3 0.1 +0.1 -0.05 3.50.3 0.25 +0.1 -0.05 1 TOP VIEW 9.70.5 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 0.1 +0.1 -0.05 3 0.25 +0.1 -0.05 6.5 +0.7 -0.5 4 6.5 +0.7 -0.5 4.60.5 0.90.25 9.600.4 Data Sheet P10958EJ7V0DS 3 PS2505-1,-2,-4,PS2505L-1,-2,-4 MARKING EXAMPLE PS2505-1 PS2505-2, -4 No. 1 pin Mark No. 1 pin Mark 2505 MD003 M D Assembly Lot 0 03 M D Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG Made in Japan Made in Taiwan D F 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG E *1 PS2505-4 only 4 Data Sheet P10958EJ7V0DS Country Assembled Type Number Assembly Lot PS2505-2 MD003 Made in Japan Made in Taiwan D *1 E F PS2505-1,-2,-4,PS2505L-1,-2,-4 ORDERING INFORMATION Part Number PS2505-1 Package 4-pin DIP *1 Application Part Number Packing Style Magazine case 100 pcs PS2505-1 PS2505L-1 PS2505L-1-E3 Embossed Tape 1 000 pcs/reel PS2505L-1-E4 PS2505L-1-F3 Embossed Tape 2 000 pcs/reel PS2505L-1-F4 PS2505-2 8-pin DIP Magazine case 45 pcs PS2505-2 PS2505L-2 PS2505L-2-E3 Embossed Tape 1 000 pcs/reel PS2505L-2-E4 PS2505-4 16-pin DIP Magazine case 20 pcs PS2505-4 PS2505L-4 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Ratings Parameter Diode Symbol Forward Current (DC) Power Dissipation PS2505-2,-4 PS2505L-2,-4 80 IF Power Dissipation Derating Unit mA PD/C 1.5 1.2 mW/C PD 150 120 mW/ch IFP 1 A Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 7 V IC 50 mA/ch Peak Forward Current Transistor PS2505-1, PS2505L-1 *1 Collector Current Power Dissipation Derating Power Dissipation *2 PC/C 1.5 1.2 mW/C PC 150 120 mW/ch Isolation Voltage BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output Data Sheet P10958EJ7V0DS 5 PS2505-1,-2,-4,PS2505L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Conditions MIN. MAX. Unit 1.4 V Forward Voltage VF IF = 10 mA 1.17 Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 100 Transistor Collector to Emitter Dark Current ICEO VCE = 80 V, IF = 0 mA Coupled Current Transfer Ratio (IC/IF) CTR IF = 5 mA, VCE = 5 V 80 CTR Ratio *1 CTR1/ CTR2 IF = 5 mA, VCE = 5 V 0.3 Collector Saturation Voltage VCE(sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 Rise Time tr *2 tf Fall Time VCC = 10 V, IC = 2 mA, RL = 100 IC1 IF1 VCE IC2 IF2 *2 Test circuit for switching time Pulse Input IF VCC PW = 100 s Duty Cycle = 1/10 50 VOUT RL = 100 Data Sheet P10958EJ7V0DS pF 100 nA 300 600 % 1.0 3.0 0.3 V 11 10 0.5 pF 3 s 5 *1 CTR1 = IC1/IF1, CTR2 = IC2/IF2 6 TYP. PS2505-1,-2,-4,PS2505L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 PS2505-1 PS2505L-1 100 PS2505-2 PS2505L-2 PS2505-4 PS2505L-4 1.5 mW/C 50 1.2 mW/C 0 25 50 75 100 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 125 150 PS2505-1 PS2505L-1 100 PS2505-2 PS2505L-2 PS2505-4 PS2505L-4 50 1.2 mW/C 0 150 25 100 125 150 FORWARD CURRENT vs. FORWARD VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 100 80 50 60 TA = +100 C +60 C +25 C Forward Current IF (mA) Forward Current IF (mA) 75 50 Ambient Temperature TA (C) Ambient Temperature TA (C) 10 5 0 C -25 C -55 C 1 0.5 40 20 0 -20 -40 -60 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 -80 1.5 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 Forward Voltage VF (V) Forward Voltage VF (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 50 mA 20 mA 10 mA 10 000 VCE = 80 V 40 V 24 V 10 V 5V 1 000 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 1.5 mW/C 100 10 1 - 50 -25 0 25 50 75 100 10 5 mA 5 2 mA IF = 1 mA 1 0.5 0.1 0 Ambient Temperature TA (C) 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) Data Sheet P10958EJ7V0DS 7 PS2505-1,-2,-4,PS2505L-1,-2,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Normalized Current Transfer Ratio CTR 70 Collector Current IC (mA) 60 50 40 50 30 mA 20 mA A m 10 20 IF = 5 mA 10 0 4 2 8 6 ,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, 1.0,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, 0.8,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, 0.6 1.2 0.4 0 10 -50 -25 0 25 50 75 Collector to Emitter Voltage VCE (V) Ambient Temperature TA (C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT SWITCHING TIME vs. LOAD RESISTANCE 1 000 450 350 Switching Time t ( s) 400 Sample A B C D 300 250 200 150 100 ts 100 10 tr 50 0 100 tf IF = 5 mA, VCC = 5 V, CTR = 290 % VCE = 5 V Current Transfer Ratio CTR (%) Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 0.2 0.05 0.1 0.5 1 5 10 1 100 50 td 500 1 k Forward Current IF (mA) 5 k 10 k 50 k 100 k Load Resistance RL () SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 50 tf tr IF = 5 mA, VCE = 5 V 0 10 Normalized Gain GV Switching Time t ( s) IC = 2 mA, VCC = 10 V, CTR = 290 % td ts 1 -5 -10 100 -15 RL = 1 k -20 0.1 10 300 50 100 500 1 k 5 k 10 k Load Resistance RL () 8 0.5 1 2 5 10 20 50 100 200 500 Frequency f (kHz) Data Sheet P10958EJ7V0DS PS2505-1,-2,-4,PS2505L-1,-2,-4 LONG TERM CTR DEGRADATION 1.2 IF = 5 mA CTR (Relative Value) 1.0 0.8 TA = 25 C 0.6 TA = 60 C 0.4 0.2 0 102 103 104 105 Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet P10958EJ7V0DS 9 PS2505-1,-2,-4,PS2505L-1,-2,-4 TAPING SPECIFICATIONS (UNIT : mm) 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2505L-1-E3 PS2505L-1-E4 Outline and Dimensions (Reel) 1.6 R 1.0 21.00.8 80.05.0 250 2.00.5 13.00.5 16.4 +2.0 -0.0 Packing: 1 000 pcs/reel 10 Data Sheet P10958EJ7V0DS PS2505-1,-2,-4,PS2505L-1,-2,-4 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2505L-1-F3 PS2505L-1-F4 Outline and Dimensions (Reel) 1.5 R 1.0 21.00.8 80.05.0 330 2.00.5 13.00.5 16.4 +2.0 -0.0 Packing: 2 000 pcs/reel Data Sheet P10958EJ7V0DS 11 PS2505-1,-2,-4,PS2505L-1,-2,-4 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 10.40.1 1.550.1 12.00.1 0.3 Tape Direction PS2505L-2-E4 PS2505L-2-E3 Outline and Dimensions (Reel) 1.5 R 1.0 21.00.8 80.05.0 330 2.00.5 13.00.5 16.4 +2.0 -0.0 Packing: 1 000 pcs/reel 12 Data Sheet P10958EJ7V0DS PS2505-1,-2,-4,PS2505L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 235 C or below (package surface temperature) * Time of temperature higher than 210 C 30 seconds or less * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating) Time (s) (2) Dip soldering * Temperature 260 C or below (molten solder temperature) * Time 10 seconds or less * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet P10958EJ7V0DS 13 PS2505-1,-2,-4,PS2505L-1,-2,-4 [MEMO] 14 Data Sheet P10958EJ7V0DS PS2505-1,-2,-4,PS2505L-1,-2,-4 [MEMO] Data Sheet P10958EJ7V0DS 15 PS2505-1,-2,-4,PS2505L-1,-2,-4 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation. * The information in this document is current as of March, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4