C4D40120D VRRM Silicon Carbide Schottky Diode 1200 V IF (TC=135C) = 54A** Z-Rec Rectifier (R) Qc Features * * * * * = = 198nC** Package 1.2kV Schottky Rectifier Zero Reverse Recovery Current High-Frequency Operation Temperature-Independent Switching Extremely Fast Switching Benefits * * * * * TO-247-3 Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway Applications * * * Switch Mode Power Supplies Power Factor Correction Motor Drives Part Number Package Marking C4D40120D TO-247-3 C4D40120 Maximum Ratings (TC=25C unless otherwise specified) Symbol Parameter 1 Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 1200 V VRSM Surge Peak Reverse Voltage 1300 V VR DC Peak Reverse Voltage 1200 V IF Continuous Forward Current (Per Leg/Device) 56.5/113 27/54 20/40 A TC=25C TC=135C TC=150C IFRM Repetitive Peak Forward Surge Current 91* 61* A TC=25C, tP=10 ms, Half Sine Pulse TC=110C, tP=10 ms, Half Sine Pulse IFSM Non-Repetitive Forward Surge Current 130* 110* A TC=25C, tP=10 ms, Half Sine Pulse TC=110C, tP=10 ms, Half Sine Pulse IF,Max Non-Repetitive Peak Forward Current 1150* 950* A TC=25C, tP=10 ms, Pulse TC=110C, tP=10 ms, Pulse 266/532 114/228 W TC=25C TC=110C Ptot Power Dissipation (Per Leg/Device) TJ Operating Junction Range -55 to +175 C Tstg Storage Temperature Range -55 to +135 C 1 8.8 Nm lbf-in TO-247 Mounting Torque * Value Per Leg, ** Per Device C4D40120D Rev. E M3 Screw 6-32 Screw Note Electrical Characteristics (Per Leg) Symbol Parameter Typ. Max. Unit Test Conditions Note VF Forward Voltage 1.5 2.2 1.8 3 V IF = 20 A TJ=25C IF = 20 A TJ=175C IR Reverse Current 35 65 200 400 A VR = 1200 V TJ=25C VR = 1200 V TJ=175C QC Total Capacitive Charge 99 nC VR = 800 V, IF = 20A di/dt = 200 A/s TJ = 25C C Total Capacitance 1500 93 67 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz VR = 800 V, TJ = 25C, f = 1 MHz Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter Typ. RJC Thermal Resistance from Junction to Case 0.29** 0.57* * Per Leg, ** Max. Unit Test Conditions Note C/W Per Device Typical Performance (Per Leg) 40 1 TJ=-55C TJ= 25C TJ= 75C TJ =125C TJ =175C 35 30 0.9 0.8 0.7 IR (mA) IF (A) 25 20 15 0.6 0.5 0.4 TJ=-55C TJ= 25C TJ= 75C TJ =125C TJ =175C 0.3 10 0.2 5 0.1 0 0 1 2 3 VF (V) Figure 1. Forward Characteristics 2 C4D40120D Rev. E 4 0 0 500 1000 VR (V) Figure 2. Reverse Characteristics 1500 Typical Performance (Per Leg) 200 300.0 180 10% 20% 30% 50% 70% DC IF(peak) (A) 140 120 250.0 Duty Duty Duty Duty Duty 200.0 PTot (W) 160 100 80 150.0 100.0 60 40 50.0 20 0 25 50 75 100 125 150 0.0 175 25 TC C 140 1600 120 1400 100 TC C 125 150 175 1200 100 1000 80 C (pF) Qrr (nC) 75 Figure 4. Power Derating Figure 3. Current Derating 60 800 600 40 400 20 200 0 0 200 400 600 800 1000 VR (V) Figure 5. Recovery Charge vs. Reverse Voltage 3 50 C4D40120D Rev. E 1200 0 0.1 1 10 VR (V) 100 Figure 6. Capacitance vs. Reverse Voltage 1000 Typical Performance 50 50.0 10000 10000 45 45.0 40 40.0 1000 1000 30.0 30 IFSM(A) I (A) FSM E (mJ) EC Capacitive Energy (uJ) C 35 35.0 25 25.0 20 20.0 100 100 15 15.0 TJ = 25C TJ = 110C 10 10.0 5.05 10 10 1E-05 1E-04 1E-03 1E-02 1.E-05 1.E-04 1.E-03 1.E-02 0.00 0 200 400 600 800 1000 0 200 400 600 800 1000 ttp(s) (s) p VR Reverse Voltage (V) VR (V) Thermal Resistance Junction To Case Impedance,(C/W) ZthJC (oC/W) Figure 7. Typical Capacitance Stored Energy, per leg Figure 8. Non-Repetitive Peak Forward Surge Current versus Pulse Duration (sinusoidal waveform), per leg 0.5 100E-3 0.3 0.1 10E-3 0.05 0.02 0.01 SinglePulse 1E-3 100E-6 1E-6 10E-6 100E-6 1E-3 Time, tp (s) T (Sec) 10E-3 Figure 9. Device Transient Thermal Impedance 4 C4D40120D Rev. E 100E-3 1 Package Dimensions Package TO-247-3 T V POS U W Inches Millimeters Min Max Min A .190 .205 4.83 5.21 A1 .090 .100 2.29 2.54 A2 .075 .085 1.91 2.16 b .042 .052 1.07 1.33 b1 .075 .095 1.91 2.41 b2 .075 .085 1.91 2.16 b3 .113 .133 2.87 3.38 b4 .113 .123 2.87 3.13 c .022 .027 0.55 0.68 D .819 .831 20.80 21.10 D1 .640 .695 16.25 17.65 D2 .037 .049 0.95 1.25 E .620 .635 15.75 16.13 E1 .516 .557 13.10 14.15 E2 .145 .201 3.68 5.10 E3 .039 .075 1.00 1.90 E4 .487 .529 12.38 13.43 e .214 BSC 5.44 BSC N 3 3 L .780 .800 19.81 20.32 L1 .161 .173 4.10 4.40 OP .138 .144 3.51 3.65 Q .216 .236 5.49 6.00 S .238 .248 6.04 6.30 T 9 11 9 11 U 9 11 9 11 V 2 8 2 8 W 2 8 2 8 Recommended Solder Pad Layout Part Number Package Marking C4D40120D TO-247-3 C4D40120 TO-247-3 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering 5 C4D40120D Rev. E Max Diode Model Diode Model CSD04060 VfVTfT== VTV+T+If*R If*RT T -3 V VTT==0.965 + (Tj *J*-1.3*10 ) -3) 0.97+(T -1.40*10 -3 RTT==0.096 + (Tj * 1.06*10 ) -4 0.023+(T J* 2.71*10 ) Note: Tj = Diode Junction Temperature In Degrees Celsius, valid from 25C to 175C VT RT Notes * RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. * REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. * This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, or air traffic control systems. Copyright (c) 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C4D40120D Rev. E Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: C4D40120D