https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page1/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input
signal: 4 ... 20 mA, output signal: 0 ... 10 V, push-in connection technology
Product Description
Standard signal 3-way signal conditioner with plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of standard
signals. The measuring transducer supports fault monitoring and NFC communication.
Key Commercial Data
Packing unit 1 pc
Weight per Piece (excluding packing) 100.000 g
Custom tariff number 85437090
Country of origin Germany
Technical data
Note
Utilization restriction EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width 6.2 mm
Height 110.5 mm
Depth 120.5 mm
Ambient conditions
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Input data
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page2/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Technical data
Input data
Number of inputs 1
Configurable/programmable no
Current input signal 4 mA ... 20 mA
Input resistance current input approx. 63 Ω (+ 0.7 V for test diode)
Output data
Number of outputs 1
Configurable/programmable no
Voltage output signal 0 V ... 10 V
Max. output voltage 11 V
Short-circuit current < 15 mA
Load/output load voltage output ≥ 10 kΩ
Ripple < 20 mVPP (at 10 kΩ)
Power supply
Nominal supply voltage 24 V DC
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-
ST-3,81 GN, Order No. 2869728) can be used to bridge the supply
voltage. It can be snapped onto a 35 mm DIN rail according to EN60715))
Typical current consumption 25 mA (24 V DC)
54 mA (12 V DC)
Power consumption ≤ 200 mW (at 9.6 V DC)
Connection data
Connection method Push-in connection
Single conductor/terminal point, solid, with ferrule, min. 0.14 mm²
Single conductor/terminal point, solid, with ferrule, max. 2.5 mm²
Single conductor/terminal point, solid, without ferrule, min. 0.14 mm²
Single conductor/terminal point, solid, without ferrule, max. 2.5 mm²
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 2.5 mm²
Min. AWG conductor cross section, flexible 24
Max. AWG conductor cross section, flexible 12
Stripping length 10 mm
General
No. of channels 1
Maximum transmission error 0.1 % (of final value)
Maximum temperature coefficient 0.01 %/K
Temperature coefficient, typical 0.01 %/K
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page3/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Technical data
General
Limit frequency (3 dB) approx. 30 Hz
Step response (10-90%) approx. 10 ms
Protective circuit Transient protection
Electrical isolation Reinforced insulation in accordance with IEC 61010-1
Overvoltage category II
Degree of pollution 2
Rated insulation voltage 300 V (effective)
Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal
deviations.
Color gray
Housing material PBT
Mounting position any
Assembly instructions The T connector can be used to bridge the supply voltage. It can be
snapped onto a 35 mm DIN rail according to EN 60715.
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
Certificate of classification DNV GL 14445-15HH
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
EMC data
Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
Designation Fast transients (burst)
Standards/regulations EN 61000-4-4
Designation Conducted interferences
Standards/regulations EN61000-4-6
Standards and Regulations
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Standards/regulations EN 61000-4-2
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page4/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Technical data
Standards and Regulations
Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
Designation Conducted interferences
Standards/regulations EN61000-4-6
Electrical isolation Reinforced insulation in accordance with IEC 61010-1
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada UL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Pictogram Block diagram
Zone 2
IN
Sensor / Field
OUT
PLC / DCS
4-wire
OUT
I+
US
5
6
1
2
PWR+
PWR–
+
+
+
–
–
–
–
+
FM
1 5
2 6
3 7
4 8
IN I+ OUT U+
TI–
PWR+
PWR–
IN I–
PWR+
PWR–
OUT U–
OUT
I-
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page5/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Pictogram
POWER
IUOUT
IN
FM
Classifications
eCl@ss
eCl@ss 4.0 27210120
eCl@ss 4.1 27210120
eCl@ss 5.0 27210120
eCl@ss 5.1 27210100
eCl@ss 6.0 27210100
eCl@ss 7.0 27210120
eCl@ss 8.0 27210120
eCl@ss 9.0 27210120
ETIM
ETIM 4.0 EC002653
ETIM 5.0 EC002653
ETIM 6.0 EC002653
UNSPSC
UNSPSC 6.01 30211502
UNSPSC 7.0901 39121004
UNSPSC 11 39121004
UNSPSC 12.01 39121004
UNSPSC 13.2 39121008
Approvals
Approvals
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page6/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Approvals
Approvals
GL / UL Listed / cUL Listed / EAC / cULus Listed
Ex Approvals
ATEX / UL Listed / cUL Listed / cULus Listed
Approval details
GL http://exchange.dnv.com/tari/ 14445-15 HH
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
EAC EAC-Zulassung
cULus Listed
Accessories
Accessories
Device marking
Marker for end clamp-UCT-EM (30X5)-0801505
Marker for end clamp, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page7/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Accessories
Marker for end clamp-UCT-EM (30X5) YE-0830340
Marker for end clamp, Sheet, yellow, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
mounting type: snapped into marker carrier, lettering field size: 30 x 5 mm
Plastic label-UC-EMLP (15X5)-0819301
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label-UC-EMLP (15X5) YE-0822615
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label-UC-EMLP (15X5) SR-0828095
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label-US-EMLP (15X5)-0828790
Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page8/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Accessories
Plastic label-US-EMLP (15X5) YE-0828873
Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm
Plastic label-US-EMLP (15X5) SR-0828874
Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15 x 5 mm
DIN rail connector
DIN rail bus connectors-ME 6,2 TBUS-2 1,5/5-ST-3,81 GN-2869728
DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Evaluation unit
Monitoring module-MINI MCR-2-FM-RC-2904504
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM
system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology, standard
configuration
Monitoring module-MINI MCR-2-FM-RC-PT-2904508
Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM
system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard
configuration
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page9/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Accessories
Labeled device marker
Marker for end clamp-UCT-EM (30X5) CUS-0801589
Marker for end clamp, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm
Marker for end clamp-UCT-EM (30X5) YE CUS-0830348
Marker for end clamp, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type:
snapped into marker carrier, lettering field size: 30 x 5 mm
Plastic label-UC-EMLP (15X5) CUS-0824550
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label-UC-EMLP (15X5) YE CUS-0824551
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label-UC-EMLP (15X5) SR CUS-0828099
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page10/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Accessories
Plastic label-US-EMLP (15X5) CUS-0830076
Plastic label, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label-US-EMLP (15X5) YE CUS-0830077
Plastic label, can be ordered: By card, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Plastic label-US-EMLP (15X5) SR CUS-0830078
Plastic label, can be ordered: By card, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 15 x 5 mm
Power module
Power terminal block-MINI MCR-2-PTB-2902066
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring
of the supply voltages in combination with the fault monitoring module. Screw connection technology
Power terminal block-MINI MCR-2-PTB-PT-2902067
Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring
of the supply voltages in combination with the fault monitoring module. Push-in connection technology
https://www.phoenixcontact.com/us/products/2902003
11/01/2018Page11/11
Signal conditioner-MINI MCR-2-I4-U-PT-2902003
Accessories
Power supply
Power supply unit-MINI-SYS-PS-100-240AC/24DC/1.5-2866983
Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
Power supply unit-MINI-PS-100-240AC/24DC/1.5/EX-2866653
Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the
potentially explosive area
Terminal marking
Marker strip-SK 5,0 WH:REEL-0805221
Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL,
THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for
terminal block width: 5 mm, lettering field size: continuous x 5 mm
DIN rail bus connectors-ME 6,2 TBUS-2 1,5/5-ST-3,81 GY-2695439
DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according to
EN60715
Phoenix Contact 2018 © - all rights reserved
http://www.phoenixcontact.com