Document Number: 68002 For technical questions, contact: te1resistors@vishay.com www.vishay.com
Revision: 19-Nov-08 3
CRHV
Vishay Techno
Thick Film Chip Resistors, High Voltage
Notes
(1) Resistance values below 1 GΩ are calibrated at 100 VDC, and
values of 1 GΩ and above are calibrated at 1000 VDC. Calibration
at other voltages available upon request.
For non-standard sizes, lower values or higher power rating
requirement, contact factory
ELECTRICAL SPECIFICATIONS
(Reference only: Not for all values specified. Consult factory for your
size and value.)
Resistance Range: 2 MΩ to 50 GΩ
Resistance Tolerance: ± 1 %, ± 2 %, ± 5 %, ± 10 %, ± 20 %
Temperature Coefficient: ± 100 ppm/°C (- 55 °C to + 150 °C)
Voltage Rating: 1500 V - 3000 V
Short Time Overload: Less than 0.5 % ΔR
FEATURES
High voltage up to 3000 V
Outstanding stability < 0.5 %
Flow solderable
Custom sizes available
Automatic placement capability
Available with either wraparound terminations or as a
single termination flip chip
Tape and reel packaging available
Internationally standardized sizes
Suitable for solderable, epoxy bondable, or wire bondable
applications
Termination: Gold, palladium silver, platinum gold,
platinum silver, platinum palladium gold or solder-coated
nickel barrier available
Multiple styles, termination materials and configurations,
allow wide design flexibility
Non-magnetic terminations available
Lead (Pb)-free version is RoHS compliant
MECHANICAL SPECIFICATIONS
Construction: 96 % alumina substrate with proprietary
cermet resistance element and specified termination material
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: - 55 °C to + 150 °C
Life: Less than 0.5 % change when tested at full rated power
(Reference only: Not for all values specified. Consult factory for your
size and value.)
* Pb containing terminations are not RoHS compliant, exemptions may apply
STANDARD ELECTRICAL SPECIFICATIONS
MODEL RESISTANCE (1)
(Ω)
POWER
RATING
(W)
VOLTAGE
RATING
(V) (max.)
CRHV1206 2M - 8G 0.300 1500
CRHV1210 4M - 10G 0.450 1750
CRHV2010 6M - 35G 0.500 2000
CRHV2510 10M - 40G 0.600 2500
CRHV2512 12M - 50G 0.700 3000
Available
RoHS*
COMPLIANT
VOLTAGE COEFFICIENT OF RESISTANCE CHART
SIZE VALUE (Ω) VCR (ppm/V) FURTHER INSTRUCTIONS
CRHV1206 2M to 199M 25 Values over 200M, consult factory
CRHV1210 4M to 200M 25 Values over 200M, consult factory
CRHV2010 6M to 99M 15 Values over 1G, consult factory
100M to 1G 20
CRHV2510 10M to 99M 10 Values over 1G, consult factory
100M to 1G 15
CRHV2512 12M to 999M 10 Values over 5G, consult factory
1G to 5G 25
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CRHV1206AF100MFKFB (preferred part number format)
GLOBAL
MODEL SIZE TERM
STYLE TERM MATERIAL RESISTANCE
VALUE TOLERANCE TCR SOLDER
TERMINATION PA C K AG I N G
CRHV 1206
1210
2010
2510
2512
A
= 3-sided
B
= top only
C
= 5-sided
A
= Palladium silver
B
= Platinum gold
C
= Gold
D
= Platinum silver
E
= Platinum
palladium gold
F
= Nickel barrier
M = Million
G = Billion
4M70
= 4.7 M
Ω
10M0
= 10 M
Ω
1G00
= 1 G
Ω
F
= ± 1.0 %
G
= ± 2.0 %
J
= ± 5.0 %
K
= ± 10.0 %
M
= ± 20.0 %
K
= 100 ppm
N
= 200 ppm
W
= 350 ppm
P
= 500 ppm
E
= Sn100
F
= Sn95/Ag5
N
= No solder
S
=
Sn62/Pb36/Ag2
T
= Sn90/Pb10
B
= Bulk
T
= Tape and
reel
W
= Waffle
Historical Part Numbering: CRHV1206AF1006F100e2 (will continue to be accepted)
CRHV 1206 A F 1006 F 100 e2
HISTORICAL
MODEL SIZE TERM
STYLE
TERM
MATERIAL
RESISTANCE
VALUE TOLERANCE TCR SOLDER
TERMINATION
V120 AF16RH 00M BC KF F
www.vishay.com For technical questions, contact: te1resistors@vishay.com Document Number: 68002
4Revision: 19-Nov-08
CRHV
Vishay Techno Thick Film Chip Resistors, High Voltage
Notes
(1) Use solder termination N for applications requiring wire bondable mounting, and solder terminations F or S for applications requiring solderable
mounting.
(2) While not recommended, palladium silver terminations could be used for solderable applications when using a solder alloy containing silver.
(3) Standard solder plating for the nickel barrier parts are solder terminations E or T. Hot solder dipped terminations F or S are also available.
DIMENSIONS in inches [millimeters]
MODEL LENGTH (L)
± 0.006 [0.152]
WIDTH (W)
± 0.006 [0.152]
THICKNESS (T)
± 0.002 [0.051]
CRHV1206 0.125 0.063 0.025
CRHV1210 0.125 0.100 0.025
CRHV2010 0.200 0.100 0.025
CRHV2510 0.250 0.100 0.025
CRHV2512 0.250 0.126 0.025
DERATING CURVE
(Reference only: Not for all values specified. Consult factory for your size and value.)
TYPE TERMINATION
MATERIAL
TERMINATION
STYLE
TERMINATION STYLE/
MATERIAL CODE
SOLDER TERMINATION
CODE
Solderable Nickel barrier 3-sided (wraparound) AF E, F, S, or T (3)
Top only (flip chip) BF
Wire bondable/
Solderable Platinum palladium gold
3-sided (wraparound) AE
N, F or S (1)
Top only (flip chip) BE
5-sided (wraparound) CE
Wire bondable/
Epoxy bondable Gold
3-sided (wraparound) AC
NTop only (flip chip) BC
5-sided (wraparound) CC
Epoxy bondable
Palladium silver (2)
3-sided (wraparound) AA
N
Top only (flip chip) BA
5-sided (wraparound) CA
Platinum gold
3-sided (wraparound) AB
Top only (flip chip) BB
5-sided (wraparound) CB
Platinum silver
3-sided (wraparound) AD
Top only (flip chip) BD
5-sided (wraparound) CD
0.025 [0.635]
Max.
L
T
W
Termination Style A
(3-sided wraparound)
0.025 [0.635]
Max.
W
T
L
Termination Style B
(Top conductor only)
T
W
L
0.025 [0.635]
Max.
Termination Style C
(5-sided wraparound)
20 50 70 100 150
120
100
80
60
40
20
0
AMBIENT TEMPERATURE IN °C
% OF RATED POWER
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.