DF005S - DF10S WTE POWER SEMICONDUCTORS 1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features ! Glass Passivated Die Construction G ! ! ! ! ! Low Forward Voltage Drop High Current Capability High Surge Current Capability Designed for Surface Mount Application B Plastic Material - UL Recognition Flammability Classification 94V-O L ~ + ~ A ! ! ! ! ! ! J Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 K Polarity: As Marked on Case *Low profile models (J = 2.20~2.50mm) are available. Weight: 0.38 grams (approx.) Please consult factory. Mounting Position: Any Marking: Type Number Maximum Ratings and Electrical Characteristics E C H Mechanical Data D DF-S Dim Min Max A 7.40 7.90 B 6.20 6.50 C 0.009 0.25 D 0.076 0.33 E -- 10.40 G 1.02 1.53 H 8.13 8.51 J* 3.20 3.40 K 5.0 5.20 L 1.00 1.20 All Dimensions in mm @TA=25C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TA = 40C Symbol DF 005S DF 01S DF 02S DF 04S DF 06S DF 08S DF 10S Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Forward Voltage per element @IF = 1.0A VFM 1.1 V Peak Reverse Current At Rated DC Blocking Voltage @TA = 25C @TA = 125C IRM 10 500 A Cj 25 pF RJA 110 K/W Tj, TSTG -65 to +150 C Typical Junction Capacitance per element (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal resistance junction to ambient mounted on PC board with 5.0mm2 (0.03mm thick) land areas. DF005S - DF10S 1 of 3 (c) 2002 Won-Top Electronics 10 60 Hz Resistive or Inductive load IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 1.0 0.5 Tj = 25C Pulse Width = 300s 2% duty cycle 1.0 0.1 0.01 0 40 60 80 100 120 140 0.4 1.0 1.4 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typ Forward Characteristics (per element) 60 100 Tj = 25c f = 1.0 Mhz Vsig = 50 mV p-p Single half-sine-Wave (JEDEC M ethod) 50 CJ, CAPACITANCE (pF) IFSM , PEAK FORWARD SURGE CURRENT (A) TA, AMBIENT TEMPERATURE (C) Fig. 1 Output Current Derating Curve 0.8 0.6 40 30 20 10 10 0 1 1 10 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typ Junction Capacitance (per element) NUM BER OF CYCLES AT 60 Hz Fig. 3 M ax Non-Repetitive Peak Forward Surge Current IR, INSTANTANEOUS REVERSE CURRENT (A) 100 Tj = 125C 10 1.0 Tj = 25C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typ Reverse Characteristics (per element) DF005S - DF10S 2 of 3 (c) 2002 Won-Top Electronics ORDERING INFORMATION Product No.! Package Type Shipping Quantity DF005S-T3 DIL Bridge SMD 1500/Tape & Reel DF005S DIL Bridge SMD 50 Units/Tube DF01S-T3 DIL Bridge SMD 1500/Tape & Reel DF01S DIL Bridge SMD 50 Units/Tube DF02S-T3 DIL Bridge SMD 1500/Tape & Reel DF02S DIL Bridge SMD 50 Units/Tube DF04S-T3 DIL Bridge SMD 1500/Tape & Reel DF04S DIL Bridge SMD 50 Units/Tube DF06S-T3 DIL Bridge SMD 1500/Tape & Reel DF06S DIL Bridge SMD 50 Units/Tube DF08S-T3 DIL Bridge SMD 1500/Tape & Reel DF08S DIL Bridge SMD 50 Units/Tube DF10S-T3 DIL Bridge SMD 1500/Tape & Reel DF10S DIL Bridge SMD 50 Units/Tube Products listed in bold are WTE Preferred devices. ! T3 suffix refers to a 13" reel. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. RECOMMENDED FOOTPRINT 0.047 MIN (1.20 MIN) 0.404 MAX (10.26 MAX) 0.06 MIN (1.52 MIN) 0.205(5.2) 0.195(5.0) inches(mm) Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com DF005S - DF10S We power your everyday. 3 of 3 (c) 2002 Won-Top Electronics