DF005S – DF10S 1 of 3 © 2002 Won-Top Electronics
DF005S – DF10S
1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Features
! Glass Passivated Die Construction G
! Low Forward Voltage Drop
! High Current Capability
! High Surge Current Capability - +
! Designed for Surface Mount Application B ~ ~ A D E
! Plastic Material – UL Recognition Flammability
Classification 94V-O C
L
H
Mechanical Data J
! Case: Molded Plastic
! Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208 K
! Polarity: As Marked on Case
! Weight: 0.38 grams (approx.) *Low profile models (J = 2.20~2.50mm) are available.
! Mounting Position: Any
Please consult factory.
! Marking: Type Number
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise sp ecified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capaciti ve load, derate current by 20%.
Characteristic Symbol DF
005S DF
01S DF
02S DF
04S DF
06S DF
08S DF
10S Unit
Peak Repetit i ve Revers e Volt age
Working Peak Reverse Volt age
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Volt age VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @TA = 40°C IO1.0 A
Non-Repetiti ve P eak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method) IFSM 30 A
Forward Voltage per element @IF = 1.0A VFM 1.1 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 125°C IRM 10
500 µA
Typical Junction Capacitance per element (Note 1) Cj25 pF
Typical Thermal Resistance (Note 2) RJA 110 K/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal resistanc e juncti on to ambient mount ed on PC board with 5.0mm2 (0.03mm thick) land areas.
WTE
POWER SEMICONDUCTORS
DF-S
Dim Min Max
A7.40 7.90
B6.20 6.50
C0.009 0.25
D0.076 0.33
E— 10.40
G1.02 1.53
H8.13 8.51
J* 3.20 3.40
K5.0 5.20
L1.00 1.20
All Dimensions in mm
0.01
0.1
1.0
10
0.4 0.6 0.8 1.0 1.2 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typ Forward Characteristics (per element)
F
T = 25°C
Pulse Width = 300µs
2% duty cycle
j
0
10
20
30
40
50
60
110100
I , PEAK FORWARD SURGECURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fi
g
. 3 Max Non-Repetitive Peak Forward Sur
g
e Current
Single half-sine-Wave
(JEDECMethod)
1
10
100
1 10 100
C , CAPACITANCE (pF)
J
V , REVERSE VOLTAGE (V)
Fig. 4 Typ Junction Capacitance (per element)
R
T = 25°c
f = 1.0 Mhz
V = 50 mV p-p
j
sig
0.01
0.1
1.0
10
100
2004060
80 100 120 140
I , INSTANTANEOUS REVERSE CURRENT (µA)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 5 Typ Reverse Characteristics (per element)
T = 125°C
j
T = 25°C
j
1.0
0.5
040 60 80 100 120 140
I , AVERAGE FORWARD CURRENT (A)
(AV)
T , AMBIENT TEMPERATURE (°C)
Fig. 1 Output Current Derating Curve
A
60 Hz Resistive or
Inductive load
DF005S – DF10S 2 of 3 © 2002 Won-Top Electronics
DF005S – DF10S 3 of 3 © 2002 Won-Top Electronics
ORDERING INFORMATION
Product No.!
!!
!Package Type Shipping Quantity
DF005S-T3 DIL Bridge SMD 1500/Tape & Reel
DF005S DIL Bridge SMD 50 Units/Tube
DF01S-T3 DIL Bridge SMD 1500/Tape & Reel
DF01S DIL Bridge SMD 50 Units/Tube
DF02S-T3 DIL Bridge SMD 1500/Tape & Reel
DF02S DIL Bridge SMD 50 Units/Tube
DF04S-T3 DIL Bridge SMD 1500/Tape & Reel
DF04S DIL Bridge SMD 50 Units/Tube
DF06S-T3 DIL Bridge SMD 1500/Tape & Reel
DF06S DIL Bridge SMD 50 Units/Tube
DF08S-T3 DIL Bridge SMD 1500/Tape & Reel
DF08S DIL Bridge SMD 50 Units/Tube
DF10S-T3 DIL Bridge SMD 1500/Tape & Reel
DF10S DIL Bridge SMD 50 Units/Tube
Products listed in bold are WTE Preferred devices.
!T3 suffix refers to a 13” reel.
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
RECOMMENDED FOOTPRINT
0.06 MIN
(1.52 MIN)
0.404 MAX
(10.26 MAX)
0.047 MIN
(1.20 MIN)
0.205(5.2)
0.195(5.0) inches
(
mm
)
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wontop.c om