SPEC NO: DSAD0985 REV NO: V.4 DATE: MAR/10/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000353
3.2x1.6mm SMD CHIP LED LAMP
Features
3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
The Blue source color devices are made with GaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
AP3216MBC BLUE
SPEC NO: DSAD0985 REV NO: V.4 DATE: MAR/10/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000353
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Part No. Dice Lens Type
Iv (mcd)
@ 20mA
Viewing
Angle
Min. Typ. 2θ
θθθ1/2
AP3216MBC BLUE (GaN) WATER CLEAR 4 10 120°
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Blue 430 nm IF=20mA
λDDominant Wavelength Blue 466 nm IF=20mA
∆λ1/2 Spectral Line Half-width Blue 60 nm IF=20mA
C Capacitance Blue 100 pF VF=0V;f=1MHz
VFForward Voltage Blue 3.8 4.5 V IF=20mA
IRReverse Current Blue 10 uA VR = 5V
Parameter Blue Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAD0985 REV NO: V.4 DATE: MAR/10/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000353
Blue AP3216MBC
SPEC NO: DSAD0985 REV NO: V.4 DATE: MAR/10/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000353
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
AP3216MBC
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).