3MTM Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System - 26 Position14526-EZHB-XXX-0QC * 10 shielded pairs plus 4 individual wires for high bandwidth applications * The solution for high speed datacom and telecom applications * Each differential pair is shielded with foil; entire cable bundle is shielded with foil and braid for additional signal protection * Rugged MDR ribbon type contact * Quick release latches * RoHS* compliant Date Modified: October 11, 2005 TS-0891-07 Sheet 1 of 3 Physical Connector Contact Plating Wiping Area: 30 [ 0.76 m ] Min. Gold Shell Color: Parchment/Beige Material: Acrylonitrile Butadiene Styrene (ABS) Cable Color: Parchment/Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1 A Insulation Resistance: > 1 x 108 at 100 VDC Withstanding Voltage: 350 Vrms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 10 (USB 90) Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Environmental Temperature Rating: -20C to +75C "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E86982 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System - 26 Position14526-EZHB-XXX-0QC 26 Position High Density Mini D Ribbon (MDR) Male Plug 26 Position High Density Mini D Ribbon (MDR) Male Plug Cable (See Wiring Diagram For Cable Construction) 2X Squeeze Release Latches 2X Squeeze Release Latches 42.0 1.65 42.0 1.65 LENGTH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 MDR 26 Position Plug Both Ends mm [Inch] Tolerance Unless Noted mm 0.0 0.00 .1 .10 [ ] Dimensions for Reference only Ordering Information 14526-EZHB-XXX-0QC Length: 100 = meter 200 = 2 meter 500 = 5 meter A00 = 10 meter 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0891-07 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System - 26 Position14526-EZHB-XXX-0QC MDR 26 Position, Pinout D26-1, Rev A Pin One to One Transmitter, Tx 3M MDR SMT Receptacle 1 USB+ 14 USB2 USB gnd 24 A6M 16 A1M 11 A5P 4 A1P 23 A5M 17 A2M 10 A4P 5 A2P 22 A4M 18 CLK1M 6 CLK1P 9 A3P Interconnect Solutions http://www.3M.com/interconnects/ 21 A3M 8 DDC/USB gnd 7 DDC/SCL 20 DDC/SDA 20 DDC/SDA 7 DDC/SCL 9 A3P 3M 25 A7M 3 A0P 21 A3M 28 AWG insulated conductor 13 A7P 12 A6P 8 DDC/USB gnd 100 Ohm balanced individually shielded twisted pair (USB pair 90 ohms). 26 LVDS gnd 15 A0M 19 DDC/USB pwr Symbols Key: Cable Receiver, Rx 3M MDR SMT Receptacle 19 DDC/USB pwr 6 CLK1P 18 CLK1M 22 A4M 5 A2P 10 A4P 17 A2M 23 A5M 4 A1P 11 A5P 16 A1M 24 A6M 12 A6P 3 A0P 15 A0M 25 A7M 2 USB gnd 13 A7P 14 USB- 26 LVDS Gnd 1 USB+ Note:The shields of the 100 Ohm pairs are in commoned in the cable and share a common drain wire, LVDS ground. TS-0891-07 Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/328-1368 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. (c) 3M 2005