Constant Current LED Driver Model Number AC-84CD2100ATFY AC84CD2100ATBFY MultiCurrent Switching and Dimming Input Voltage: 120-277V Input Frequency: 50/60Hz Side and Bottom Mount/Leads Options ELECTRICAL SPECIFICATIONS: Output Power Max. Input Power Input Current Minimum PF (full load) Max. THD (full load) Minimum Starting Temp. IP Rating Efficiency Up To Dimming Protocol Dimming Range 84W 95W 0.79A @ 120V 0.3A @ 277V >0.9 <20% 24-40V 2100mA5% 90 C -40 C 64 88% 0 to 10V 10 to 100% 70W 80W 0.67A @ 120V 0.29A @ 277V >0.9 <20% 24-40V 1750mA5% 90 C -40 C 64 87% 0 to 10V 10 to 100% 56W 65W 0.54A @ 120V 0.24A @ 277V >0.9 <20% 24-40V 1400mA5% 90 C -40 C 64 86% 0 to 10V 10 to 100% Output Voltage WIRING: Output Current T case Max. PHYSICAL: Bottom Mount Option Model Number: AC84CD2100ATBFY Hot Spot Lead Lengths Black White 5.9" 5.9" Blue Red 5.9" 5.9" Driver Option: * 12V Output Tap Wire * IP 67 Rating Purple Gray 5.9" 5.9" Dimensions Length Width Height Mounting * 10% dimming, Dim-To-Off and 1% * 10Kv Surge Protection 9.5" 2.4" 1.46" 8.9" Consult Factory for model number and form factor SAFETY & PERFORMANCE: * UL US Class 2 * cUL LVLE * UL Outdoor Type 1 * Class A sound rating * No PCBs * Open/Short Circuit Protection * LED driver has a life expectancy of 50,000 hours at Tcase of 75C * LED driver has a life expectancy of 100,000 hours at Tcase of 65C * Warranty: 5 yrs based on max case temp of <75C; 3 yrs based on max case temp of 90C* * Input/Output Isolation * FCC Title 47 CFR Part 15 * Surge Protection (3 KV) INSTALLATION: * LED drivers shall be installed inside electrical enclosures * 18 AWG 600V/105C tinned strand copper lead-wires are required for installation * Max Remote installation distance is 18 ft * LED driver cases should be grounded *AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75C; 3 years from date of manufacture when operated at a max case temp of up to 90C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy. 3401 Avenue D, Arlington, TX 76011 * 800-375-6355 * www.aceleds.com Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted. (c)2017 Revised 04/11/2017 E328847 LVLE RoHS COMPLIANT L E A D - F R E E AC-84CD2100ATFY AC84CD2100ATBFY Performance Characteristics Life Time (kHours) Life Time v.s. Case Temperature Curve 180 165 150 135 120 105 90 75 60 45 30 15 0 30 32 35 40 45 50 55 60 65 70 75 80 85 90 Case Temperature Curve (C) Derating Curve 120Vac & 277Vac 120 Load (%) 100 80 60 40 20 0 -40 -20 0 20 40 60 80 Outside Driver Ambient Temperature (C) 3401 Avenue D, Arlington, TX 76011 * 800-375-6355 * www.aceleds.com Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted. (c)2017 Revised 04/11/2017 100 AC-84CD2100ATFY AC84CD2100ATBFY Performance Characteristics Efficiency v.s. Load Efficiency (%) 95.00% 90.00% 120V 277V 85.00% 80.00% 75.00% 70.00% 50.00% 60.00% 70.00% 80.00% 90.00% 100.00% Load (%) Power Factor v.s. Load 1 0.98 0.96 120V 277V PF 0.94 0.92 0.9 0.88 0.86 50.00% 60.00% 70.00% 80.00% 90.00% 100.00% Load (%) 3401 Avenue D, Arlington, TX 76011 * 800-375-6355 * www.aceleds.com Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted. (c)2017 Revised 04/11/2017 AC-84CD2100ATFY AC84CD2100ATBFY Performance Characteristics Output Current (A) Output Current v.s. Dimming 2.4 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 4 6 7 8 9 10 Dimming (0-10V) Output Current (A) Output Current v.s. Resistance 2.4 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 Resistance (K) 3401 Avenue D, Arlington, TX 76011 * 800-375-6355 * www.aceleds.com Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted. (c)2017 Revised 04/11/2017