Versafit PBBs PBBEs PBBOs Highly flame-retardant, low recovery temperature, heat-shrinkable tubing Versafit heat-shrinkable tubing is a cost-effective choice for many commercial and military applications. Versafit tubing is made from a specially formulated, crosslinked polyolefin to provide high flameretardance (VW-1), excellent flexibility, and a low shrink temperature (to reduce installation time). Electrically insulates and protects in-line components, disconnect terminals, and splices. Bundles wires for very flexible light-duty harnesses. Identifies or color-codes wires, cables, terminals, and components. Versafit tubing hot-stamps extremely well. Versafit tubing performs a variety of functions in commercial and military applications: Compared to noncrosslinked materials, Versafit tubing has a higher temperature rating and exhibits better thermal stability and resistance to physical abuse. Unlike other typical flame-retardant tubings, Versafit tubing is free of polybrominated biphenyls (PBBs) and polybrominated biphenyl oxides and ethers (PBBOs/PBBEs). In Europe, these chemicals are classified as environmentally hazardous substances. Temperature rating Full recovery temperature: Continuous operating temperature: 90C -55C to 135C Specifications* (R) Type Versafit Raychem RW-3009 UL E35586 VW-1 600V, 125C CSA LR31929 VW-1 600V, 125C Military AMS-DTL-23053/5 Classes 1 and 3 *When ordering, always specify latest issue. Dimensions (millimeters/inches) W Expanded as supplied D Size 3/64 1/16 3/32 1/8 3/16 1/4 3/8 1/2 5/8 3/4 1 1 1/4 1 1/2 2 3 4 Inside diameter D Expanded as supplied 1.63 0.2 0.064 0.008 1.85 0.2 0.073 0.007 2.79 0.2 0.110 0.007 3.43 0.2 0.135 0.007 5.21 0.3 0.205 0.010 7.11 0.3 0.280 0.010 10.16 0.4 0.400 0.015 13.72 0.4 0.540 0.015 16.90 0.4 0.665 0.015 20.45 0.4 0.805 0.015 25.53 0.4 1.055 0.015 33.40 0.7 1.315 0.025 39.88 0.8 1.570 0.030 52.83 1.0 2.080 0.040 78.49 1.0 3.090 0.040 104.14 1.3 4.100 0.050 Fully recovered after heating d (max.) Recovered after heating 0.6 0.023 0.8 0.031 1.2 0.046 1.6 0.062 2.4 0.093 3.2 0.125 4.8 0.187 6.4 0.250 8.0 0.315 9.5 0.375 12.7 0.500 15.9 0.625 19.1 0.750 25.4 1.000 38.1 1.500 50.8 2.000 d Wall thickness W Recovered after heating** 0.40 0.08 0.016 0.003 0.43 0.08 0.017 0.003 0.51 0.08 0.020 0.003 0.51 0.08 0.020 0.003 0.51 0.08 0.020 0.003 0.64 0.08 0.025 0.003 0.64 0.08 0.025 0.003 0.64 0.08 0.025 0.003 0.76 0.08 0.030 0.003 0.76 0.08 0.030 0.003 0.89 0.13 0.035 0.005 1.02 0.15 0.040 0.006 1.02 0.15 0.040 0.006 1.14 0.16 0.045 0.007 1.27 0.20 0.050 0.008 1.40 0.23 0.055 0.009 **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering information Colors Size selection Standard packaging Ordering description Standard Black, white, red, blue, yellow and green Nonstandard Brown, orange, violet, and gray Always order the largest size that will shrink snugly over the component being covered. A variety of special order sizes are available. On spools. Specify product name, size, and color; for example, Versafit 1/4-0 (0=Black). Specification values Electrical Chemical Property Dimensions Longitudinal change ASTM D 2671 UL 224 Eccentricity (recovered) Tensile strength Ultimate elongation Secant modulus (expanded) Low-temperature flexibility (1 hour at -45C/-49F) Heat shock (1 hour at 136C/277F) Heat resistance (7 days at 158C/316F) Followed by tests for: Tensile strength Ultimate elongation Flexibility Dielectric withstand at 2500 V Dielectric breakdown Dielectric strength Restricted shrinkage Dielectric strength Dielectric withstand at 2500 V Volume resistivity Corrosive effect (7 days at 158C/316F) Copper stability (7 days at 158C/316F) Followed by test for: Ultimate elongation Flammability Water absorption (recovered) (24 hours at 23C/73F) Fungus resistance Followed by tests for: Tensile strength Ultimate elongation Dielectric strength Unit mm (inches) Requirement See reverse Method of test ASTM D 2671 percent percent percent psi (MPa) percent psi (MPa) +1, -5 +3, -3 30 maximum 1500 (10.3) minimum 200 minimum 2.5 X 104 (172) maximum No cracking ASTM D 2671 UL224 ASTM D 2671 ASTM D 2671 ASTM D 2671 ASTM D 2671 UL 224 No cracking UL 224 ASTM D 2671 psi (MPa) percent seconds volts volts/mil (kV/mm) volts/mil (kV/mm) seconds ohm-cm percent percent 70% minimum of unaged specimens 100 minimum No cracking 60 minimum UL 224 UL 224 UL 224 UL 224 50% minimum of unaged specimens 500 (19.7) minimum Pass 500 (19.7) minimum 60 minimum ASTM D 2671 ASTM D 2671 UL 224 ASTM D 2671 UL 224 1014 minimum No corrosion ASTM D 2671 ASTM D 2671 No brittleness, glazing, cracking, or severe discoloration of tubing. No pitting or blackening of copper. ASTM D 2671 100 minimum Pass 0.5 maximum ASTM D 2671 UL 224, VW-1 ASTM D 2671 ISO 846 Method B psi (MPa) percent volts/mil (kV/mm) 1500 (10.3) minimum 200 minimum 500 (19.7) minimum ASTM D 2671 ASTM D 2671 ASTM D 2671 Note: Consult RW-3009 for specific details about test procedures. Versafit and Raychem are trademarks of Tyco Electronics Corporation. Users should independently evaluate the suitability of the product for their application. Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025-1164 USA Tel: (800) 926-2425 (US & Canada) Tel: +1 (650) 361-3860 (All other countries) Faraday Road Dorcan, Swindon, SN3 5HH United Kingdom Tel: +44 1793 528171 3816 Noborito, Tama-ku Kawasaki, Kanagawa 214-8533 Japan Tel: +81 44 900 5102 Asia Pacific Headquarters 26 Ang Mo Kio, Industrial Park 2 Singapore 569507 Tel: +65 4866 151 All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation's only obligations are those in the Standard Terms and Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Tyco Electronics Corporation's Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing without notification to the Buyer which do not affect compliance with any applicable specification. For more information about this product visit www.tycoelectronics.com (c) 1994, 1997, 2002 Tyco Electronics Corporation Printed in USA 1654051 Revised 04/04 Physical Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: VERSAFIT-1/2-9-SP