BC857BLP4 45V PNP SMALL SIGNAL SURFACE MOUNT TRANSISTOR Features Mechanical Data * * * * * * * * Epitaxial Die Construction Ultra-Small Leadless Surface Mount Package Ultra-low Profile (0.40mm max) Complementary NPN Type Available (BC847BLP4) "Lead Free", RoHS Compliant (Note 1) Halogen and Antimony Free "Green" Device (Note 2) * * * Case: DFN1006H4-3 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish NiPdAu over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.0008 grams (approximate) C DFN1006H4-3 B B C E E Bottom View Device Symbol Top View Device Schematic Ordering Information (Note 3) Product BC857BLP4-7 BC857BLP4-7B Notes: Marking F2 F2 Reel size (inches) 7 7 Tape width (mm) 8 8 Quantity per reel 3,000 10,000 1. No purposefully added lead. 2. Diodes Inc's "Green" policy can be found on our website at http://www.diodes.com. 3. For packaging details, go to our website at http://www.diodes.com. Marking Information BC857BLP4-7 F2 Top View Dot Denotes Collector Side BC857BLP4 Document number: DS31361 Rev. 5 - 2 BC857BLP4-7B F2 F2 = Product Type Marking Code Top View Bar Denotes Base and Emitter Side 1 of 5 www.diodes.com February 2011 (c) Diodes Incorporated BC857BLP4 Maximum Ratings @TA = 25C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Symbol VCBO VCEO VEBO IC Value -50 -45 -5.0 -100 Unit V V V mA Symbol PD RJA TJ, TSTG Value 250 500 -55 to +150 Unit mW C/W C Thermal Characteristics Characteristic Power Dissipation (Note 4) @TA = 25C Thermal Resistance, Junction to Ambient Air (Note 4) @TA = 25C Operating and Storage Temperature Range Electrical Characteristics @TA = 25C unless otherwise specified Characteristic (Note 5) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage DC Current Gain Symbol V(BR)CBO V(BR)CEO V(BR)EBO hFE Min -50 -45 -5 220 Typ -- -- -- 300 -90 -250 Max -- -- -- 475 -300 -650 Collector-Emitter Saturation Voltage VCE(SAT) -- Base-Emitter Saturation Voltage VBE(SAT) Base-Emitter Voltage -- -- -700 -850 -- -- mV VBE(ON) -600 -- -670 -710 -750 -820 mV Collector-Cutoff Current ICBO -- -- -- -- -15 -4.0 nA A Gain Bandwidth Product fT 100 -- -- MHz CCBO -- 3.0 -- pF Collector-Base Capacitance Notes: Unit V V V -- mV Test Condition IC = 10A, IB = 0 IC = 10mA, IB = 0 IE = 1A, IC = 0 VCE = -5.0V, IC = -2.0mA IC = -10mA, IB = -0.5mA IC = -100mA, IB = -5.0mA IC = -10mA, IB = -0.5mA IC = -100mA, IB = -5.0mA VCE = -5.0V, IC = -2.0mA VCE = -5.0V, IC = -10mA VCB = -30V VCB = -30V, TA = 150C VCE = -5.0V, IC = -10mA, f = 100MHz VCB = -10V, f = 1.0MHz 4. Device mounted on FR-4 PCB, pad layout as shown on Diodes Inc. suggested pad layout document AP02001 on our website at http://www.diodes.com 5. Short duration pulse test used to minimize self-heating effect. BC857BLP4 Document number: DS31361 Rev. 5 - 2 2 of 5 www.diodes.com February 2011 (c) Diodes Incorporated BC857BLP4 100 -IC, COLLECTOR CURRENT (A) PD, POWER DISSIPATION (mW) 300 250 200 150 100 50 IB = -0.5mA 80 IB = -0.4mA 60 IB = -0.3mA IB = -0.2mA 40 IB = -0.1mA 20 RJA = 500 C/W 0 0 0 25 50 75 100 125 TA, AMBIENT TEMPERATURE (C) Fig. 1 Power Derating Curve 150 0 1 2 3 4 5 -VCE, COLLECTOR-EMITTER VOLTAGE (V) Fig. 2 Typical Collector Current vs. Collector-Emitter Voltage VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) 500 400 300 200 100 0 10 100 1.0 0.8 0.6 0.4 0.2 0 0.1 1 10 100 IC, COLLECTOR CURRENT (A) Fig. 5 Typical Base-Emitter Turn-On Voltage vs. Collector Current BC857BLP4 Document number: DS31361 Rev. 5 - 2 0.2 0.1 0 0.1 1 10 100 IC, COLLECTOR CURRENT (A) Fig. 4 Typical Collector-Emitter Saturation Voltage vs. Collector Current 1,000 VBE(SAT), BASE-EMITTER SATURATION VOLTAGE (V) VBE(ON), BASE-EMITTER TURN-ON VOLTAGE (V) 1 0.3 3 of 5 www.diodes.com 0.1 1 10 100 IC, COLLECTOR CURRENT (A) Fig. 6 Typical Base-Emitter Saturation Voltage vs. Collector Current February 2011 (c) Diodes Incorporated BC857BLP4 Package Outline Dimensions DFN1006H4-3 Dim Min Max Typ A 0.40 A1 0 0.05 0.02 b1 0.10 0.20 0.15 b2 0.45 0.55 0.50 D 0.95 1.075 1.00 E 0.55 0.675 0.60 e 0.35 L1 0.20 0.30 0.25 L2 0.20 0.30 0.25 L3 0.40 All Dimensions in mm A A1 D b1 E e b2 L2 L3 L1 Suggested Pad Layout C X1 X G2 G1 Y Dimensions Z G1 G2 X X1 Y C Value (in mm) 1.1 0.3 0.2 0.7 0.25 0.4 0.7 Z BC857BLP4 Document number: DS31361 Rev. 5 - 2 4 of 5 www.diodes.com February 2011 (c) Diodes Incorporated BC857BLP4 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2011, Diodes Incorporated www.diodes.com BC857BLP4 Document number: DS31361 Rev. 5 - 2 5 of 5 www.diodes.com February 2011 (c) Diodes Incorporated