Best USB Audio I/O Controller for External High End 8CH Audio Devices CM106-F+/L+ High Integrated USB Audio I/O Controller (Dolby Digital Live and DTS Connect Software Technology Bundle) DataSheet 1.0 C-MEDIA ELECTRONICS INC. TEL: 886-2-8773-1100 FAX: 886-2-8773-2211 6F, 100, Sec. 4, Civil Boulevard, Taipei, Taiwan 106, R.O.C. For detailed product information, please contact sales@cmedia.com.tw CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution NOTICES THIS DOCUMENT IS PROVIDED "AS IS" WITH NO WARRANTIES WHAT SO EVER, INCLUDING ANY WARRANTY OF MERCHANT ABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, DOCUMENT OR SAMPLE. ALL RIGHTS RESERVED. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING INFORMATION STORAGE AND RETRIEVAL SYSTEMS, WITHOUT PERMISSION IN WRITING FROM C-MEDIA ELECTRONICS, INC. COPYRIGHT Copyright (c) 2005-2007 C-Media Electronics Inc. All rights reserved. All content included on this document, such as text, graphics, logos, button icons, images, audio clips, digital downloads, data compilations, and software, is either the exclusive property of C-Media Electronics Inc., its affiliates (collectively, "C-Media"), its content suppliers, or its licensors and protected by Republic of China and international copyright laws. TRADEMARKS C-Media, the C-Media Logo, Xear 3D, Xear 3D Logo and Speaker Shifter are trademarks of C-Media Electronics Inc. in Republic of China and/or other countries. Dolby Digital and dts are trademarks of Dolby Laboratories, Inc. and DTS Corporate. and All other brand, logos and product names listed are trademarks or registered trademarks of their respective holders and are hereby recognized as such. *C-Media reserves the right to modify the specifications without further notice* Date: 08/19/2005 Version 1.01 -2- CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Table of Contents 1. DESCRIPTIONS AND OVERVIEW 5 2. FEATURES 6 3. PIN DESCRIPTIONS 8 3.1 CM106-F+ QFP 100 PIN TABLE 8 3.2 CM106-L+ LQFP 48 PIN TABLE 8 3.3 CM106-F+ QFP 100 PIN DESCRIPTION 10 3.4 CM106-L+ LQFP 48 PIN DESCRIPTION 13 4. ORDERING INFORMATION 16 4.1 CM106-L+ (LQFP 48 PIN) PACKAGE 16 4.2 CM106-F+ (QFP 100 PIN) PACKAGE 17 5. FUNCTION BLOCK DIAGRAM OF CM106-F+/L 18 6. FUNCTION DESCRIPTIONS 19 6.1 INTERNAL REGISTER 19 6.2 MCU INTERFACE 22 6.3 SERIAL EEPROM CONTENT 24 6.4 DAC 25 6.5 ADC 25 6.6 POWER MANAGEMENT 25 Date: 08/19/2005 Version 1.01 -3- CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 7. SOFTWARE TECHNOLOGY 26 7.1 Xear 3DTM SOUND 26 7.2 DOLBY(R) DIGITAL LIVE 27 7.3 DTS(R) CONNECT 28 8. VOLUME CONTROL 30 8.1 DAC VOLUME CONTROL 30 8.2 ADC VOLUME CONTROL 30 8.3 MIC / LINE-IN MONITOR VOLUME CONTROL 31 9. ELECTRICAL CHARACTERISTICS 32 9.1 ABSOLUTE MAXIMUM RATING 32 9.2 RECOMMENDED OPERATION CONDITIONS 32 9.3 AUDIO PERFORMANCE 33 10. AUDIO PERFORMANCE CURVES 35 10.1 AA PATH (LINE IN TO LINE OUT) FREQUENCY RESPONSE 35 10.2 AA PATH (LINE IN TO LINE OUT) CROSS TALK 35 10.3 DAC (FRONT) FREQUENCY RESPONSE @ 48KS/SEC 36 10.4 DAC (FRONT) FREQUENCY RESPONSE @ 44.1KS/SEC 36 10.5 DAC (FRONT) PASS BAND RIPPLE @ 48KS/SEC 37 10.6 DAC (FRONT) PASS BAND RIPPLE @ 44.1KS/SEC 37 10.7 ADC (LINE IN) FREQUENCY RESPONSE @ 48KS/SEC 38 10.8 ADC (MIC IN) FREQUENCY RESPONSE @ 48KS/SEC 38 11. APPLICATION CIRCUIT 39 11.1 CM106-L+ (LQFP 48) / CM106-F+ (QFP 100) Date: 08/19/2005 39 Version 1.01 -4- CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 1. DESCRIPTIONS AND OVERVIEW CM106-F+/ L+ is a highly integrated single chip USB audio solution. All essential analog modules are embedded in CM106F+/L+, including 8CH DAC and earphone buffer, 2CH ADC, microphone booster, PLL, regulator, and USB transceiver. This chip design can provided more efficiency features and high quality sound for high end USB audio products application. It is very suitable for USB external audio box, USB multi-channel headphone, USB Ducking System, USB Portable Home Theater Adoptoror and USB audio interface multi-channel speaker set application. CM106F+/L+ is design for all kind of PC base USB multi-media audio device products. It is USB 2.0 full speed compatible and utilizes USB bus power for plug-and-play feature. Via C-Media Xear 3D Sound USB audio driver, users can avail themselves of a much better virtual 7.1 CH environment capable. Moreover, Xear 3D sound also supported unique enviromentFX, 10 band equalizer sound effects and Karaoke function. For high-end consumer application, this multi-media audio device can easy to processing any sound source to Dolby Digital AC-3 and DTS interactive raw data by real-time encoding function. The world first innovation software function to grade up every PC system and output high quality digital sound effects for link up with high-end home theater equipments like amplifier, DVD player or decoder etc. These special features are Dolby Digital Live and DTS Connect function modules. As we know, Dolby Digital and DTS (Digital Theater System) are the world well-known sound technology brands and generality using on consumer electronics. Therefore, if PC products need to be home theater equipment or media center this would be key feature and selling point for product development. These functions not only provide easy bridge to connect PCs and consumer electronics but also adding value and upgrade sound quality to PC products. In the future, PCs can put on Dolby Digital and DTS logo on it and provide advanced sound quality to end-user. All of modules were implemented by C-Media in software technology and anyone can request these features by license from Dolby Lab. and DTS Corporate. through C-Media. Furthemore, Many features are programmable with external EEPROM and MCU interface. In addition, Venders can using MCU/EEPROM/GPIO control interface easily via HID software to develop remote control or keypad button functions. Better yet, CM106-F+/L support stereo MIC, phone jack sense, S/PDIF I/O and 48/44.1 Khz sampling rate. Date: 08/19/2005 Version 1.01 -5- CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 2. FEATURES USB spec. 2.0 full speed compliant and USB IF certification USB audio device class spec. 1.0 and USB HID class spec. 1.1 compliant IEC60958 spec. Compliant (consumer format S/PDIF input and output with loop-back support) SCMS (Serial Copy Management System) compliant Dolby(R) Digital and DTS audio streaming via S/PDIF out USB remote wake-up support 8 channel DAC output with 16 bit resolution 3.1 Vpp (1.1 Vrms) biased at 2.25V output swing Volume control and mute function Earphone buffer 2X interpolator for digital playback data to improve quality 2 channel ADC input with 16 bit resolution 3.2 Vpp (or 4.0 Vpp programmed by vendor driver) biased at 2.25V input swing Volume control and mute function Date: 08/19/2005 Version 1.01 -6- CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Additional headphone output with selectable source and phone jack sense Stereo MIC support with boost capability Recording source select from S/PDIF, MIC, Line-in and summation of MIC, Line-in and front channel MIC, Line-in monitor from front channel (all channels optional) with volume control and mute function Master volume control by default; per-channel volume control by C-Media driver Playback with soft-mute function Support 48 / 44.1 KHz sampling rate for both playback and recording MCU support with two-wire serial interface Serial EEPROM support for customized VID/PID MCU / EEPROM / GPIO control via HID software interface Volume up / volume down / playback mute HID button LED indicator pins: operation / recording mute / SCMS protection Embedded USB transceiver and power on reset circuit Single 12MHz crystal input with embedded PLL Single 5V power supply with embedded 5V to 3.3V regulator Industry standard LQFP-48 (CM106-L+) or QFP-100 (CM106-F+) package C-Media value added patent software driver Xear 3D sound Earphone Plus SPEAKER SHIFTER Environment sound effects Room Size Mode Graphic Equalizer Karaoke Function Software Driver support Dolby Digital Live for multi-media content real-time encoder with Dolby Digital AC-3 Raw data bit stream Software Driver support DTS Connect with DST Interactive and DTS NEO:PC sound technology DST Interactivemulti-media content real-time encoder with DTS Raw data bit stream NEO:PCaudio up-mix matrix technology that turns any 2 channel audio into 7.1 surrounds sound. Date: 08/19/2005 Version 1.01 -7- CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 3. PIN DESCRIPTIONS 3.1 CM106-F+ QFP 100PIN TABLE PIN # Signal Name 1~7 NC 8 DVSS5 9 PHONES 10 CS 11 SK 12 DR 13 DW 14 MSEL1 15 MSEL2 16 DVSS2 17 USBDP 18 USBDM 19 REGV 20 DVDD1 21 AVSS3 22 MICINL 23 MICINR 24~30 NC PIN # 31~34 35 36 37 38 39 40 41 42 43 44 45 46 47~50 51~57 58 59 60 Signal Name PIN # Signal Name PIN # NC 61 LOCF 85 LIL 62 LOLFE 86 LIR 63 AVSS2 87 AVDD1 64 DVSS6 88 VREF 65 VOLUP 89 VBIAS 66 VOLDN 90 AVSS1 67 SPDIFI 91 HPOUTL 68 MUTER 92 HPOUTR 69 MUTEP 93 LOSL 70 SPDIFO 94 LOSR 71 GPIO2 95 LOFL 72 GPIO3 96 LOFR 73 GPIO4 97 NC 74 DVSS7 98 NC 75~80 NC 99 AVDD2 81~82 NC 100 LOLS 83 PDSW LORS 84 XI Signal Name XO DVSS1 PWRSEL PWRSEL1 DVSS3 SDAT SCLK TEST MCLK DVSS4 MINT GPIO1 LEDO LEDR LEDS NC 3.2 CM106-L+ LQFP 48PIN TABLE PIN # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Signal Name PDSW XI XO DVSS1 SDAT SCLK TEST MCLK MINT GPIO1 LEDO LEDR PHONES CS SK DR PIN # 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Signal Name DW USBDP USBDM REGV DVDD1 AVSS3 MICINL MICINR LIL LIR AVDD1 VREF VBIAS AVSS1 HPOUTL HPOUTR Date: 08/19/2005 PIN # 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 Signal Name LOSL LOSR LOFL LOFR AVDD2 LOLS LORS LOCF LOLFE AVSS2 VOLUP VOLDN SPDIFI MUTER MUTEP SPDIFO Version 1.01 -8- CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Figure 1. CM106-F+ QFP 100 Pin Assignments (Top View) Figure 2. CM106-L+ LQFP 48 Pin Assignments (Top View) Date: 08/19/2005 Version 1.01 -9- CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 3.3 CM106-F+ QFP 100 PIN DESCRIPTION Pin # Symbol Type Description 1~7 NC -- -- 8 DVSS5 P 9 PHONES DI 10 CS DO EEPROM interface chip select 11 SK DO EEPROM interface clock 12 DR DO EEPROM interface data read 13 DW DI EEPROM interface data write 14 MSEL1 DI 15 MSEL2 DI 16 DVSS2 P Digital ground 17 USBDP AIO USB data D+ 18 USBDM AIO USB data D- 19 REGV AO 3.3V reference output for internal 5 20 DVDD1 P 5V power supply to internal regulator 21 AVSS3 P Analog ground 22 MICINL AI Microphone input left channel 23 MICINR AI Microphone input right channel 24~30 NC -- -- 31~34 NC -- -- 35 LIL AI Line-In input left channel 36 LIR AI Line-In input right channel 37 AVDD1 P 5V analog power for analog circuit 38 VREF AO Digital ground Phone jack sense pin for line out Tri-state; an internal register bit will be set when activated (active H) 0: MICINL/R and LIL/R mix to 8 channels 1: MICINL/R and LIL/R mix to LOFL and LOFR 0: playback only 1: playback and recording 3.3V regulator Connecting to external decoupling capacitor for embedded band-gap circuit; 2.25V output Date: 08/19/2005 Version 1.01 - 10 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Pin # Symbol Type Description 39 VBIAS AO 40 AVSS1 P 41 HPOUTL AO Headphone out left channel 42 HPOUTR AO Headphone out right channel 43 LOSL AO Line out side (back) left channel 44 LOSR AO Line out side (back) right channel 45 LOFL AO Line out front left channel 46 LOFR AO Line out front right channel 47~50 NC -- -- 51~57 NC -- -- 58 AVDD2 P 59 LOLS AO Line out surround (rear) left channel 60 LORS AO Line out surround (rear) right channel 61 LOCF AO Line out center channel 62 LOLFE AO Line out LFE (subwoofer) channel 63 AVSS2 P Analog ground 64 DVSS6 P Digital ground 65 VOLUP DI Volume up (edge trigger with de-bouncing) 66 VOLDN DI Volume down (edge trigger with de-bouncing) 67 SPDIFI DI S/PDIF input 68 MUTER DI Mute recording (edge trigger with de-bouncing) 69 MUTEP DI Mute playback (edge trigger with de-bouncing) 70 SPDIFO DO S/PDIF output 71 GPIO2 DIO GPIO pin #2 72 GPIO3 DIO GPIO pin #3 73 GPIO4 DIO GPIO pin #4 74 DVSS7 P Microphone bias voltage supply (4.5V/2.25V) Analog ground 5V analog power for analog circuit Digital ground Date: 08/19/2005 Version 1.01 - 11 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Pin # Symbol Type Description 75~80 NC -- -- 81~82 NC -- -Power down switch control (for PMOS polarity) 83 PDSW DO 0: normal mode 1: power down mode 84 XI DI 12MHz crystal, or oscillator input 85 XO DO 12MHz crystal output 86 DVSS1 P 87 PWRSEL DI 88 PWRSEL1 DI 89 DVSS3 P 90 SDAT DIO External MCU serial bus data pin 91 SCLK DI External MCU serial bus clock pin 92 TEST DI Test mode select pin; pull low in normal operation Digital ground 0: self power 1: bus power 0: 100mA operation current 1: 500mA operation current Digital ground External MCU clock pin; clock frequency is programmable (12MHz, 93 MCLK DO 6MHz, 3MHz, 1.5MHz) Default is 1.5 MHz 94 DVSS4 DO Digital ground External MCU interrupt pin (active L) 95 MINT DO When internal register address 0 ~ 3 or external serial EEPROM is accessed, MINT is set low; after MCU read, MINT is reset to H 96 GPIO1 DIO GPIO pin #1 97 LEDO DO LED for operation; output H for power on; toggling for data transmit 98 LEDR DO LED for mute recording indication; output H when recording is muted 99 LEDS DO 100 NC -- LED for SCMS indication; output H when S/PDIF input is not authorized to record -- Date: 08/19/2005 Version 1.01 - 12 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 3.4 CM106-L+ LQFP 48 PIN DESCRIPTION Pin # Symbol Type Description Power down switch control (for PMOS polarity) 1 PDSW DO 0: normal mode 1: power down mode 2 XI DI 12MHz crystal, or oscillator input 3 XO DO 12MHz crystal output 4 DVSS1 P 5 SDAT DIO External MCU serial bus data pin 6 SCLK DI External MCU serial bus clock pin 7 TEST DI Test mode select pin; pull low in normal operation Digital ground External MCU clock pin; clock frequency is programmable 8 MCLK DO (12MHz, 6MHz, 3MHz, 1.5MHz) Default is 1.5 MHz External MCU interrupt pin (active L) 9 MINT DO When internal register address 0 ~ 3 or external serial EEPROM is accessed, MINT is set low; after MCU read, MINT is reset to H 10 GPIO1 DIO GPIO pin #1 11 LEDO DO LED for operation; output H for power on; toggling for data transmit 12 LEDR DO LED for mute recording indication; output H when recording is muted 13 PHONES DI 14 CS DO EEPROM interface chip select 15 SK DO EEPROM interface clock 16 DR DO EEPROM interface data read 17 DW DI EEPROM interface data write 18 USBDP AIO USB data D+ 19 USBDM AIO USB data D- 20 REGV AO 3.3V reference output for internal 5 21 DVDD1 P 5V power supply to internal regulator 22 AVSS3 P Analog ground 23 MICINL AI Microphone input left channel Phone jack sense pin for line out Tri-state; an internal register bit will be set when activated (active H) Date: 08/19/2005 3.3V regulator Version 1.01 - 13 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Pin # Symbol Type Description 24 MICINR AI Microphone input right channel 25 LIL AI Line-In input left channel 26 LIR AI Line-In input right channel 27 AVDD1 P 5V analog power for analog circuit 28 VREF AO 29 VBIAS AO 30 AVSS1 P 31 HPOUTL AO Headphone out left channel 32 HPOUTR AO Headphone out right channel 33 LOSL AO Line out side (back) left channel 34 LOSR AO Line out side (back) right channel 35 LOFL AO Line out front left channel 36 LOFR AO Line out front right channel 37 AVDD2 P 38 LOLS AO Line out surround (rear) left channel 39 LORS AO Line out surround (rear) right channel 40 LOCF AO Line out center channel 41 LOLFE AO Line out LFE (subwoofer) channel 42 AVSS2 P Analog ground 43 VOLUP DI Volume up (edge trigger with de-bouncing) 44 VOLDN DI Volume down (edge trigger with de-bouncing) 45 SPDIFI DI S/PDIF input 46 MUTER DI Mute recording (edge trigger with de-bouncing) 47 MUTEP DI Mute playback (edge trigger with de-bouncing) 48 SPDIFO DO S/PDIF output Connecting to external decoupling capacitor for embedded band-gap circuit; 2.25V output Microphone bias voltage supply (4.5V/2.25V) Analog ground 5V analog power for analog circuit Date: 08/19/2005 Version 1.01 - 14 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution *Note 1: DI - digital input pad DO - digital output pad DIO - digital bi-directional pad AI/AO/AIO - analog pad P - power pad *Note 2: For LQFP 48 package, PWRSEL, PWRSEL1, MSEL1 and MSEL2 are internal bonding options; They are not bonded by default. Date: 08/19/2005 Version 1.01 - 15 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 4. ORDERING INFORMATION 4.1 CM106-L+ (LQFP48) PACKAGE Date: 08/19/2005 Version 1.01 - 16 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 4.2 CM106-F+ (QFP100) PACKAGE Date: 08/19/2005 Version 1.01 - 17 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 5. FUNCTION BLOCK DIAGRAM OF CM106-F+/L+ Figure 3Function Block Diagram Of CM106-F+/L+ Signal Set EEPROM VOL I/F LED I/F MCU I/F SEL GPIO Power Signals CS, SK, DR, DW VOLUP, VOLDN, MUTER, MUTEP LEDO, LEDR, LEDS SCLK, SDAT, MCLK, MINT PWRSEL, PWRSEL1, MSEL1, MSEL2 GPIO1, GPIO2, GPIO3, GPIO4 AVDD1, AVDD2, AVSS1, AVSS2, DVDD1, DVSS1, DVSS2 Date: 08/19/2005 Version 1.01 - 18 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 6. FUNCTION DESCRIPTION 6.1 INTERNAL REGISTER The internal registers of CM106F+/L+ can be divided to two parts. Some of them (REG0, REG1, REG2 and REG3) are 16-bit width and can be accessed via HID interface. The others are 8-bit width and can be accessed by vendor requests. To access registers via HID interface, users should issue a "Set Output Report" HID request. The four bytes of output report data is organized as below: Byte [0] Read: 8'd48 Write: 8'd32 Byte [1] DATAL Byte [2] DATAH Byte [3] Register address (0, 1, 2, 3) In addition to internal registers, users can also access external serial EEPROM by the same way: Byte [0] Read: 8'd80 Write: 8'd64 Byte [1] DATAL Byte [2] DATAH Byte [3] EEPROM address (0 ~ 8'd63) When users intend to read register / EEPROM by "Set Output Report", the returned data will be transferred to USB host via HID input report through interrupt pipe. The three bytes of input report data is organized as below: Byte [0] MCUIN EEIN REGIN HEADPON MUTE VDN VUP DATAL from MCU when MCUIN = 1 Byte [1] DATAL from EEPROM when EEIN = 1 DATAL from Register when REGIN = 1 DATAH from MCU when MCUIN = 1 Byte [2] DATAH from EEPROM when EEIN = 1 DATAH from Register when REGIN = 1 Date: 08/19/2005 Version 1.01 - 19 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Users can distinguish the source of input report by Byte[0], Byte[1] and Byte[2] consist a word which may be the content of addressed register or serial EEPROM. It may also be an arbitrary word programmed by external MCU. In addition, Byte[0] carries the information of HID button status (MUTE, VDN and VUP), and phone jack sense (HEADPON). VDN/VUP would be 1 when VOLDN/VOLUP button is pressed, and keeps pressed (VOLDN/VOLUP keeps 0). MUTE would be 1 when MUTEP button is pressed, and would be cleared to 0 after USB host reads the input report. HEADPON would be 1 when headphone is plugged in (PHONES is 1). Refer to the following tables for the definition of internal registers can be accessed via HID interface: Address: 0x00 Reset State: 0x0000 REG0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 CSR Bit Number 12-0 Bit Mnemonic CSR Read/ Write R/W Function SPDIF out control Address: 0x01 Reset State: 0xb000 REG1 15 14 DACX2en FS 7 6 GPIO2_ OEN GPIO2_o Bit Number 15 14 13 12 11 10 9 8 7 13 PLLBINe n 12 SOFTMU TEen 5 4 GPIO1_ OEN GPIO1_o Bit Mnemonic DACX2en FS PLLBINen SOFTMUTEen GPIO4_o GPIO4_OEN GPIO3_o GPIO3_OEN GPIO2_o Read/ Write R/W R/W R/W R/W R/W R/W R/W R/W R/W 11 GPIO4_o 3 LOWFIR SET 10 GPIO4_ OEN 2 SPDIFLO OP 9 GPIO3_o 1 DIS_SPD IFO 8 GPIO3_ OEN 0 SPDIFMI X Function DAC X 2 enable ADC full scale setting PLL binary search enable Soft mute enable Gpio4 signal Gpio4 output enable Gpio3 signal Gpio3 output enable Gpio2 signal Date: 08/19/2005 Version 1.01 - 20 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Bit Number 6 5 4 3 2 1 0 Bit Mnemonic GPIO2_OEN GPIO1_o GPIO1_OEN LOWFIRSET SPDIFLOOP DIS_SPDIFO SPDIFMIX Read/ Write R/W R/W R/W R/W R/W R/W R/W Function Gpio2 output enable Gpio1 signal Gpio1 output enable Low pass filter setting SPDIF loop-back enable SPDIF out disable SPDIF in mix enable Address: 0x02 Reset State: 0x0004 REG2 15 DRIVERON 7 14 13 HEADPSEL 6 5 PLAYMUTE Bit Number 15 Bit Mnemonic DRIVERON Read/ Write R/W 14~13 HEADPSEL R/W 12~3 PLAYMUTE R/W MICRSEL R/W MCUCLKSE L R/W 2 1~0 12 11 10 PLAYMUTE 9 8 4 3 2 MICRSEL 1 0 MCUCLKSEL Function If (HEADPON = 1 and DRIVERON = 0) 1. All channels muted except Headphone channels 2. Select Headphone source from Front channels Else 1. Channel mute controlled by PLAYMUTE registers 2. Headphone source selected by HEADPSEL registers Headphone source select 00: Front channels 01: Center and Subwoofer 02: Surround channels 03: Side channels Channel mute control (high active) PLAYMUTE[0]: mute Left Front PLAYMUTE[1]: mute Right Front PLAYMUTE[2]: mute Center PLAYMUTE[3]: mute Subwoofer PLAYMUTE[4]: mute Left Surround PLAYMUTE[5]: mute Right Surround PLAYMUTE[6]: mute Side Left PLAYMUTE[7]: mute Side Right PLAYMUTE[8]: mute Headphone Left PLAYMUTE[9]: mute Headphone Right MIC right channel source select 0: left channel (mono) 1: right channel (stereo) MCU clock frequency 00: 1.5Mhz 01: 3Mhz 10: 6Mhz 11: 12Mhz Date: 08/19/2005 Version 1.01 - 21 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Address: 0x03 Reset State: 0x003f / 0x007f REG3 15 14 13 12 11 10 VRAP 25EN 9 MSEL1 8 SPDFI_ FREQ[1] 7 SPDFI _FREQ[0] 6 PINSEL 5 FOE 4 ROE 3 CBOE 2 LOSE 1 HPOE 0 CANREC Bit Number 10 Bit Mnemonic VRAP25EN Read/ Write R/W 9 MSEL1 R/W 8~7 SPDFI_FREQ R 6 PINSEL R 5 FOE R/W 4 ROE R/W 3 CBOE R/W 2 LOSE R/W 1 HPOE R/W 0 CANREC R Function Microphone bias voltage supply select 0: 4.5V 1: 2.25V 0: MICINL/R and LIL/R mix to LOFL and LOFR 1: MICINL/R and LIL/R mix to 8 channels SPDIF in sample rate 00: 44.1K 01: reserved 10: 48K 11: 32K 0: 100 pin package 1: 48 pin package 1: LOFL/LOFR enable 0: LOFL/LOFR disable (Hi Z) 1: LOLS/LORS enable 0: LOLS/LORS disable (Hi Z) 1: LOCF/LOLFE enable 0: LOCF/LOLFE disable (Hi Z) 1: LOSL/LOSR enable 0: LOSL/LOSR disable (Hi Z) 1: HPOUTL/HPOUTR enable 0: HPOUTL/HPOUTR disable (Hi Z) SPDIF in recording status 0: SPDIF in can not be recorded 1: SPDIF in can be recorded 6.2 MCU INTERFACE CM106F+/L+ can communicate with external MCU via two-wire serial interface and act as a slave device. By this way, MCU can read four bytes from and write two bytes to USB host through CM106.When MCU writes two bytes to CM106F+/L+, the data will be transferred to USB host via HID `Input Report'. USB host will keep polling HID report every 32ms. CM106F+/L+ can also transfer four bytes from USB host to MCU. This is accomplished by a `Set Output Report' HID request issued by USB host. CM106F+/L+ will then assert MINT to inform Date: 08/19/2005 Version 1.01 - 22 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution MCU to read them. CM106F+/L+ has one input pin `SCLK' to get serial clock from MCU, and one open-drain output pin `SDAT' to send or receive serial signal to/from MCU. As shown below, `SDAT' should be stable when `SCLK' is high, and can have transition only when `SCLK' is low. START and STOP conditions shown below are the exception. Every transaction begins from a START, and ends with a STOP, or another START (repeated START). The figure below demonstrates a transaction example. After every 8 bits sent by the transmitter, the receiver should send one bit low for positive acknowledgement or one bit high for negative acknowledgement. After the negative acknowledgement, a STOP or repeated START should follow. Date: 08/19/2005 Version 1.01 - 23 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution The figure below shows typical transactions between MCU and CM106. After a START, MCU should send 7-bit slave address (7'b0111000) first, and then the 8th bit denotes a read transfer when it's high; or a write transfer when it's low. MCU write: S 8'h70 MCU read: S 8'h70 S 8'h71 0 8'h01 0 Byte[1] 0 Byte[2] 1 0 0 8'h00 Byte[0] 1 0 Byte[1] 0 Byte[2] 0 : From CM106 to MCU Byte[3] 1 P : From MCU to CM106 S : START condition P : STOP condition 0 : Positive acknowledge 1 : Negative acknowledge Byte P : One byte data In a write transfer, MCU keeps acting as the transmitter. CM106F+/L+ regards the first DATA byte as start register address. The second and third DATA bytes are the content that MCU writes to the register addresses. In a read transfer, two transactions are necessary. MCU resets start register address by the first transaction. Then MCU changes to be the receiver during the second transaction to get four bytes of data. 6.3 SERIAL EEPROM CONTENT CM106F+/L+ supports four-wire serial EEPROM interface. When an external serial EEPROM is detected, Vendor ID and Product ID reported within Device Descriptor will be derived from the content of serial EEPROM. The organization of serial EEPROM is shown below: Address = 0 Address = 1 Address = 2 16'h630X Vendor ID Product ID Address = 63 16'hXXXX Users can program serial EEPROM via HID interface, as described in the former section. Although 64 words can be accessed by CM106F+/L+, only the first three words are significant to CM106F+/L+. The first word is a magic code. Only when it matches, CM106F+/L+ will regard the serial EEPROM valid. Date: 08/19/2005 Version 1.01 - 24 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 6.4 DAC CM106F+/L+ contains eight 16-bit DACs. The DACs are implemented in two-stage resister ladder architecture. With 2X interpolator in logic block, these DACs are indeed operated at two time of sample rate. The playback stream from USB host is in signed 16-bit binary. CM106F+/L+'s logic block converts the data to unsigned format, and adds 64 as a fixed offset. The converted data to DAC input is then in unsigned 17-bit binary. The 2X interpolator, and fixed offset value added upon playback stream could improve SNR. 6.5 ADC CM106F+/L+ contain two 16-bit ADCs. The ADCs are implemented in Sigma-Delta architecture. In addition to the default digital low pass filter, CM106F+/L+ provides an alternate one that could improve SNR further. A larger ADC input swing (4.0Vp-p) is also available. Refer to the internal register section for more information. 6.6 POWER MANAGEMENT To meet suspend current specification of USB, CM106 F+/L+ turns off most blocks when entering suspend. The only two exception are power-on-reset and regulator. To meet unconfigured current specification of USB, CM106 F+/L+ provides a control signal PDSW to turn off external components. PDSW would be active when USB host does not configure CM106 F+/L+. PDSW would also be active when CM106 F+/L+ is suspended. If serial EEPROM is exist, notice that it should not be powered off anyway because it contains Vendor ID and Product ID which should be returned to USB host before CM106 F+/L+ is configured. The value of two input pin PWRSEL and PWRSEL1 (for CM106-F+ only) would affect configuration descriptor. If users declare the device as bus-power and high-power, and it is attached to a bus-power hub, USB host would not configure the device because the power budget is over. Date: 08/19/2005 Version 1.01 - 25 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 7. SOFTWARE TECHNOLOGY 7.1 Xear 3DTM SOUND C-Media provides new generation USB Digital Audio with exclusive Xear 3DTM sound technology. This is a value-added PC audio total solution, that integrated advance Dolby Digital and DTS sound technology. All kinds of applications can get maximum support. This patented 3D sound technology not only supports real-time 3D gaming and industry-standard 5.1CH or 7.1CH DVD, but also offers an immersive virtual 5.1Ch and 7.1CH sound field to the users regardless of what type of output device is actually utilized. Thanks to Xear 3DTM Sound Technology, even if users are using a pair of earphones or 2CH speakers, still they can avail themselves of a much better virtual 5.1CH or 7.1CH environment capable only by Xear 3DTM Sound Technology. Better yet, all audio formats can be converted to thrilling 3-dimensional audio by this technology. Personalized and optimum 5.1CH/7.1CH listening environment and experience is thus achieved. - Support EAX2.0TM - Support DS3DTM H/W &S/W - Games 5.1 & 7.1 Virtual SPEAKER SHIFTER 5.1 Xearphone 2-Speaker Virtual Theater Earphone Plus Personal Theater DVD Movies - Environment Emulation Environment Sizes 10-Band Equalizer Microphone Echo Effect Magic Voice Key-Shifting Vocal Cancellation Music (MP3/CD) Karaoke Xear 3D Sound Features for All Applications Date: 08/19/2005 Version 1.01 - 26 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 7.2 DOLBY(R) DIGITAL LIVE C-Media Xear 3DTM Sound Solution provides another state-of-the-art high quality audio function--Dolby digital AC-3 encoder module. With this real-time software encoder, the existing and future customers who are using C-Media USB audio solution and devices can obtain this digital quality audio output by S/PDIF format much easier than before. This function can output various 3D and environmental sound effects by high quality AC-3 encoding; in the meantime, it exhibits supreme efficiency--it takes only 7% of CPU consumption from a Pentium 4 Processor. A technology that can encode all the digital audio content on PC into Dolby Digital stream in real-time. It can then be sent to external decoder for playback. All path are digital and wiring is simple. Dolby(R) Digital Live was a real-time encoding technology it converts any audio signal into a Dolby Digital bit stream for transport and playback through a home theater system. With it, your PC or game console can be hooked up to your Dolby Digital-equipped audio/video receiver or digital speaker system via a single digital connection, eliminating the confusion of multiple cables and ensuring the integrity of the audio signal. The real-time interactive capabilities of Dolby Digital Live technology are ideally suited to PCs and video game consoles because it reproduces audio cues and effects that follow the on-screen action, transforming game play into an exciting and realistic entertainment experience. Systems using Dolby Digital Live technology can provide Dolby Digital (5.1-channel surround sound) during game play, immersing players in high-quality surround sound that puts them at the center of the action. Gamers hear every window shatter, feel every explosion, and experience every wipeout. These high-performance device provide an S/PDIF connector and use a digital cable for one-step connection to a home theater system. Dolby Digital Live can also enable other future entertainment capabilities on the PC because of its ability to deliver any audio source via a single digital interface to an existing home theater system. Date: 08/19/2005 Version 1.01 - 27 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 7.3 DTS(R) CONNECT Besides Dolby, C-Media was also the world first PC audio provider whom can integrate whole DTS Digital DSP technology in software module. Everyone knows that, DTS is the famous of the world sound technology which guarantee high quality and performance. DTS Connect comprised two technology : one is DTS Interactive the other is NEO : PC. A real-time DTS encoder which takes any LPMC (2 channel or more) and encodes it into DTS bit stream. The data transfer format is 48 KHz at 1.5 mb/sec. Just using a single cable connection to your DTS enabled surround sound system such as, powered PC speakers, an A/V receiver or any other DTS compatible surround sound system. DTS Interactive A real-time DTS encoder which takes any LPMC (2 channel or more) and encodes it into DTS bit stream. The data transfer format is 48 KHz at 1.5 mb/sec. Just using a single cable connection to your DTS enabled surround sound system such as, powered PC speakers, an A/V receiver or any other DTS compatible surround sound system. It can take any content (WMA, MP3, CD, and more!) to transfer 5.1 multi-chances with real-time whenever play on line game, listen music, and watch VCD. Uses a single digital connection Transforms all PC audio signals into a DTS signal Optimized for low-latency interactive applications Provides realistic 5.1-channel surround sound effects during interactive video game play NEOPC An audio up-mix matrix technology that turns any 2 channel audio into 7.1 surrounds sound. It can turn your stereo audio (WMA, MP3, CD, and more!) into a convincing multi-channel audio experience. Date: 08/19/2005 Version 1.01 - 28 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Music mode allows you to control music's vocal to be concentrated or separated with center gain adjustment bar. Cinema mode can set to let you enjoy dramatic impact. Wide mode is a special effect signal to the surround channels for wide space feeling. Date: 08/19/2005 Version 1.01 - 29 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 8. VOLUME CONTROL 8.1 DAC VOLUME CONTROL VOL_*_<5:0> Scale (linear) VOL_*_<5:0> Scale (linear) VOL_*_<5:0> Scale (linear) VOL_*_<5:0> Scale (linear) 00 1.000 10 0.724 20 0.448 30 0.171 01 0.973 11 0.696 21 0.420 31 0.144 02 0.944 12 0.669 22 0.392 32 0.116 03 0.917 13 0.641 23 0.365 33 0.088 04 0.890 14 0.613 24 0.337 34 0.061 05 0.862 15 0.586 25 0.309 35 0.033 06 0.834 16 0.558 26 0.282 36 0.006 07 0.807 17 0.530 27 0.254 37 mute 08 0.779 18 0.503 28 0.227 09 0.751 19 0.475 29 0.199 Note: VOL_*_ stands for VOL_FL_, VOL_FR_, VOL_CF_, VOL_LFE_, VOL_LS_, VOL_RS_, VOL_SL_, OL_SR_. The volume control is in linear scale. 8.2 ADC VOLUME CONTROL VOL_*_<3:0> Scale (log) VOL_*_<3:0> Scale (log) VOL_*_<3:0> Scale (log) VOL_*_<3:0> Scale (log) 00 +22.5dB 04 +16.5dB 08 +10.5dB 12 +4.5dB 01 +21.0dB 05 +15.0dB 09 +9.0dB 13 +3.0dB 02 +19.5dB 06 +13.5dB 10 +7.5dB 14 +1.5dB 03 +18.0dB 07 +12.0dB 11 +6.0dB 15 0.0dB Note: VOL_*_ stands for VOL_REC_L_ and VOL_REC_R_. The volume control is in log scale. Date: 08/19/2005 Version 1.01 - 30 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 8.3 MIC / LINE-IN MONITOR VOLUME CONTROL VOL_*_<4:0> Scale (log) VOL_*_<4:0> Scale (log) VOL_*_<4:0> Scale (log) VOL_*_<4:0> Scale (log) 00 +12.0dB 08 0.0dB 16 -12.0dB 24 -24.0dB 01 +10.5dB 09 -1.5dB 17 -13.5dB 25 -25.5dB 02 +9.0dB 10 -3.0dB 18 -15.0dB 26 -27.0dB 03 +7.5dB 11 -4.5dB 19 -16.5dB 27 -28.5dB 04 +6.0dB 12 -6.0dB 20 -18.0dB 28 -30.0dB 05 +4.5dB 13 -7.5dB 21 -19.5dB 29 -31.5dB 06 +3.0dB 14 -9.0dB 22 -21.0dB 30 -33.0dB 07 +1.5dB 15 -10.5dB 23 -22.5dB 31 mute Note: VOL_*_ stands for VOL_MICM_L_, VOL_MICM_R_, VOL_LINEM_L_, VOL_LINEM_R_. The volume control is in log scale. Date: 08/19/2005 Version 1.01 - 31 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 9. ELECTRICAL CHARACTERISTICS 9.1 ABSOLUTE MAXIMUM RATING Symbol Parameter Value Unit Dvmin Min Digital Supply Voltage - 0.3 V Dvmax Max Digital Supply Voltage +6 V Avmin Min Analog Supply Voltage - 0.3 V Avmax Max Analog Supply Voltage +6 V Dvinout Voltage on any Digital Input or Output -0.3 to +5.5 V -0.3 to +5.5 V Pin Avinout Voltage on any Analog Input or Output Pin TBstgB Storage Temperature Range -40 to +125 o C ESD (HBM) ESD Human Body Mode 3500 V ESD (MM) ESD Machine Mode 200 V Latch Up Trigger Current 400 mA ILatch_Up 9.2 RECOMMENDED OPERATION CONDITIONS Operation conditions Min Typ Max Unit Analog Supply Voltage 4.5 5.0 5.5 V Digital Supply Voltage 4.5 5.0 5.5 V - - 350 mA 80 mA uA Operating Current: Un-configure Current Suspend Current - - 250 Operating ambient temperature 0 - 70 Date: 08/19/2005 P0P C Version 1.01 - 32 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 9.3 AUDIO PERFORMANCE Min Typ Max Unit AA Path (Line In to Line Out) THD + N (-3dBr) -89 dB Dynamic range 99 dB Cross talk 101 dB Frequency response 48KHz 20 20K Hz DAC (Front) THD + N (-3dBr) - -69 - dB SNR - 92 - dB Dynamic range 90 dB Frequency response @ 48KHz 20 20K Hz Frequency Response @ 44.1KHz 20 17.6K Hz Full Scale Output Voltage Range - - Vrms Center Voltage 1.17 2.25 V Pass Band Ripple @ 48KHz +-0.05 dB Pass Band Ripple @ 44.1KHz +-0.05 dB DAC (Rear) THD + N (-3dBr) - -70 - dB SNR - 91 - dB Dynamic range 90 dB DAC (Center/Bass) THD + N (-3dBr) - -68 - dB SNR - 91 - dB Dynamic range 90 dB DAC (Back Surround) THD + N (-3dBr) - -68 - dB SNR - 91 - dB Dynamic range 90 Date: 08/19/2005 dB Version 1.01 - 33 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Min Typ Max Unit ADC (Line In) THD + N (-3dBr) -70 dB SNR 84 dB Dynamic Range 85 dB Frequency Response @ 48KHz 20 Input Range 0 - 20K Hz 3.2 (4.0) Vpp ADC (Mic) THD + N (-3dBr) -68 dB SNR 83 dB Dynamic Range 84 dB Frequency Response @ 48KHz 70 Input Range 0 - 12.5 Hz 3.2 (4.0) Vpp *Note: All specifications at +25oC, AVdd=DVdd=5V, 10k Ohm loading Date: 08/19/2005 Version 1.01 - 34 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 10. AUDIO PERFORMANCE CURVES 10.1 AA PATH (LINE IN TO LINE OUT) FREQUENCY RESPONSE C -Media A nalog P ass-Through (A-A ) for Line Input to Line O utput Frequency R esponse 08/12/04 10:44:41 -19 -19 -19.25 -19.25 -19.5 -19.5 d B r -19.75 -20 -19.75 d B -20 r A -20.25 -20.25 B -20.5 -20.5 -20.75 -20.75 -21 20 -21 50 100 200 500 1k 2k 5k 10k 20k Hz Sw eep Trace C olor Line Style Thick D ata Axis C om m ent 1 1 1 2 C yan Yellow Solid Solid 2 2 Anlr.Level A Anlr.Level B Left R ight LL-FreqR es p.at2 10.2 AA PATH (LINE IN TO LINE OUT) CROSS TALK C-Media Analog to A nalog C rosstalk 08/12/04 15:20:08 +0 -25 -50 d B -75 -100 -125 20 50 100 200 500 1k 2k 5k 10k 20k Hz Sw eep Trace C olor Line Style Thick D ata Axis 1 1 1 2 Green Yellow Solid Solid 3 3 Anlr.C ros s talk Anlr.C ros s talk Left Left C om m ent Line In to Line Out(10k ohm s Load) 0dBr = 0dBFS = 1.9 dBV aa-axtalk.at2 Date: 08/19/2005 Version 1.01 - 35 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 10.3 DAC (FRONT) FREQUENCY RESPONSE @ 48KS/SEC C -Media D igital P layback (P C -D -A ) for Line O utput Frequency R esponse 08/12/04 14:53:18 30 5k +1 +0 d B r -1 -2 -3 A -4 -5 -6 50 100 200 500 1k 2k 10k Hz Sw e ep Trace C o lo r L in e Style Th ick D a ta Axis 1 1 1 2 Gre en Ye llow So lid So lid 3 3 Fa s tte s t.C h .1 Am p l!N o rm alize Fa s tte s t.C h .2 Am p l!N o rm alize Le ft Le ft C o m m en t WL -Mu ltito ne -48 k.a t2 10.4 DAC (FRONT) FREQUENCY RESPONSE @ 44.1KS/SEC C -Media D igital P layback (PC -D -A) for Line O utput Frequency R esponse 08/12/04 14:54:41 +1 +0 d B r -1 -2 -3 A -4 -5 -6 20 50 100 200 500 1k 2k 5k 10k Hz Sw eep Trace C olor Line Style Thick D ata Axis 1 1 1 2 Green Yellow Solid Solid 3 3 Fas ttes t.C h.1 Am pl!N orm alize Fas ttes t.C h.2 Am pl!N orm alize Left Left C om m ent WL-Multitone-44k.at2 Date: 08/19/2005 Version 1.01 - 36 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 10.5 DAC (FRONT) PASS BAND RIPPLE @ 48KS/SEC C -Media D igital Playback (P C -D -A) for Line O utput Passband R ipple @ 48ks/sec 08/12/04 14:54:00 + 0.4 + 0.2 d B +0 -0.2 -0.4 -0.6 40 50 100 200 500 1k 2k 5k 9k Hz Sw eep Trace C olor Line Style Thick D ata Axis 1 1 1 2 Green Yellow Solid Solid 3 3 Fas ttes t.C h.1 Am pl!N orm alize Fas ttes t.C h.2 Am pl!N orm alize Left Left C om m ent WL-Pas s bandR ipple-M48k.at2 10.6 DAC (FRONT) PASS BAND RIPPLE @ 44.1KS/SEC C -Media D igital Playback (PC -D -A ) for Line O utput Passband R ipple @44.1ks/sec 08/12/04 14:55:21 + 0.4 + 0.2 d B +0 -0.2 -0.4 -0.6 40 50 100 200 500 1k 2k 5k 8k Hz Sw eep Trace C olor Line Style Thick D ata Axis 1 1 1 2 Green Yellow Solid Solid 3 3 Fas ttes t.C h.1 Am pl!N orm alize Fas ttes t.C h.2 Am pl!N orm alize Left Left C om m ent WL-Pas s bandR ipple-M44k.at2 Date: 08/19/2005 Version 1.01 - 37 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 10.7 ADC (LINE IN) FREQUENCY RESPONSE @ 48KS/SEC C-Media D igital R ecording (A-D -PC) for Line Input Frequency Response +1 +0 d B r -1 -2 -3 1 -4 -5 -6 20 50 100 200 500 1k 2k 5k 10k Hz Sw eep Trace C olor Line Style Thick D ata Axis 1 1 1 2 Green Yellow Solid Solid 3 3 Fas ttes t.C h.1 Am pl!N orm alize Fas ttes t.C h.2 Am pl!N orm alize Left Left C om m ent LW-MFreqR es p-48K.at2 10.8 ADC (MIC IN) FREQUENCY RESPONSE @ 48KS/SEC C-Media D igital R ecording (A-D -PC) for Line Input Frequency Response +1 +0 d B r -1 -2 -3 1 -4 -5 -6 20 50 100 200 500 1k 2k 5k 10k Hz Sw eep Trace C olor Line Style Thick D ata Axis 1 1 1 2 Green Yellow Solid Solid 3 3 Fas ttes t.C h.1 Am pl!N orm alize Fas ttes t.C h.2 Am pl!N orm alize Left Left C om m ent LW-MFreqR es p-48K.at2 Date: 08/19/2005 Version 1.01 - 38 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution 11. APPLICATION CIRCUIT 11.1 CM106-L+ (LQFP48) / CM106-F+ (QFP100) Date: 08/19/2005 Version 1.01 - 39 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution Date: 08/19/2005 Version 1.01 - 40 - CM106-F+/L+ High End 8CH DAC and 2CH ADC Integrated Solution REFERENCE USB-IF, USB Specification, Revision 1.1 and 2.0, and USB Audio Device Class Specification, Revision 1.0,. End of Specifications C-MEDIA ELECTRONICS INC. 6F., 100, Sec. 4, Civil Boulevard, Taipei, Taiwan 106 R.O.C. TEL:886-2-8773-1100 FAX:886-2-8773-2211 E-mail sales@cmedia.com.tw TU UT URL http://www.cmedia.com.tw TU Date: 08/19/2005 UT Version 1.01 - 41 -