SSAG330400 - ALPS ELECRIC - Datasheet.Live

｜ Dimensions｜ Land Dimensions｜ Circuit Diagram｜ Packing Specifications
｜ Soldering Conditions｜ 3D CAD｜
｜ 
Travel 1.5mm
Actuator directions Horizontal
Poles 1
Positions 3
Operating force 1N (Recoil side)
Changeover timing Not specified
Soldering Reflow
Operation Double-side recoil
Shape of frame leg Flat
Location lug With
Operating temperature range -10℃ to +60℃
Rating (max.)/(min.) (Resistive load) 10mA 5V DC/50µA 3V DC
Electrical
performance
Contact resistance
(Initial performance/After lifetime)
200mΩ max./500mΩ max.
Insulation resistance 100MΩ min. 100V DC
Voltage proof 100V AC for 1 minute
Mechanical
performance
Terminal strength 3N for 1 minute
Actuator strength Operating direction 10N
Pulling direction 10N
Durability Operating life without load 100,000 cycles 500mΩ max.
Operating life with load 
(at max. rated load)
100,000 cycles 500mΩ max.
Environmental
performance
Cold -40℃ 96h
Dry heat 85℃ 96h
Damp heat 40℃, 90 to 95%RH 96h
Minimum order unit (pcs.) Japan 4,000
Export 16,000
3D CAD (STEP)
Certificate of Compliance to RoHS regulations
Dimensions
Slide Switch > SSAG Series > SSAG330400
Recoil Type for Single-side and Both-sides SSAG Series
Part number
SSAG330400

Land Dimensions

Viewed from direction A in the dimensions.

Circuit Diagram

Packing Specifications

Taping

Number of packages

(pcs.)

1 reel 4,000

1 case / Japan 8,000

1 case / export

packing

16,000

Tape width (mm) 24

Export package measurements (mm) 428×413×172

Soldering Conditions

Example of Reflow Soldering Condition

1. Heating method

Double heating method with infrared heater.

2. Temperature measurement

Thermocouple 0.1 to 0.2 Φ CA (K) or CC (T) at soldering portion (copper foil surface). A heat resisting tape should

be used for fixed measurement.

3. Temperature profile

A(℃)

3s max.

B(℃)C(s) D(℃)E(℃)F(s)

260 230 40 180 150 120

(1) The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases

where the PC board's temperature greatly differs from that of the switch, depending on the PC board's material,

size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures.

(2) Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is

highly recommended.

Reference for Hand Soldering

Soldering temperature 350±5℃

Soldering time 3s max.

Notes are common to this series/models.

1. This site catalog shows only outline specifications. When using the products, please obtain formal

specifications for supply.

2. Please place purchase orders per minimum order unit (integer).

Inquiries about Products

Inquiry

Inquiries about Products

Inquiry