The ILC7011 is an 80mA, Ultra Low Noise, Low Dropout
(LDO) linear regulator, designed and processed in Impala’s
proprietary CMOS process technology. This process com-
bines the best CMOS features of low quiescent current,
small size and low dropout voltage with the best bipolar fea-
tures of high ripple rejection, ultra low noise and power han-
dling capability. The ILC7011 offers a quiescent current of
less than 100µA, a logic level enable (regulator on/off) pin,
a footprint that is half the size of the industry standard SOT-
23 and a low dropout voltage of 50mV at 10mA. With bet-
ter than 70dB (1kHz) of ripple rejection, ultra low noise of
10µVRMS and 1% output voltage accuracy, the ILC7011 sets
a new standard in linear regulators for communications and
personal electronics applications.
The ILC7011 is designed to operate with small, low cost,
ceramic capacitors and is stable over a wide range of ESR
values. In addition to the output capacitor, the ILC7011
requires only a 1µF input capacitor. The enable pin can be
tied to VIN for easy device layout. The ILC7011 is available
in a number of fixed output voltages ranging from 2.5V to
8V. An adjacent version will be available shortly.
The ILC7011 is ideally suited for use in small size cordless
and cellular handsets as well as many other low battery
powered electronic devices. Please contact Impala for
samples and application information.
ILC7011
80mA SC70 Ultra Low Noise CMOS RF-LDO™ Regulator
Preliminary www.fairchildsemi.com
Rev. 1.5 September 2001
1
• 1% output voltage accuracy
• Only 10µVRMS noise from 300Hz to 100kHz
• Uses low ESR ceramic or Tantalum output capacitor to
minimize noise and output ripple.
• Only 90µA ground current at 80mA load
• Ripple rejection up to 70dB at 1kHz, 60dB at 1MHz
• Excellent line and load transient response
• Guaranteed to 80mA output current
• Industry standard five lead SC70 packages
• Fixed 2.8V, 3.0V, 3.3V, 3.6V, 4.7V, 5.0V, output voltage
options
• Metal mask option available for custom voltages between
2.5V and 8V
• Cellular phones
• Wireless communicators
• PDAs / palmtops / organizers
• Battery powered portable electronics
5
ILC7011
ON
OFF
VIN
CIN
COUT
VOUT
4
123
CNOISE
Ordering Information
(TA= 0°C to 70°C)
Typical Circuit
ILC7011C5-XX 80mA, fixed voltage, SC-70 Package
Note: Fixed voltage options are defined by 2-digit code as shown
in the package markings information section of the data sheet
General Description Features
Applications
80mA SC 70 Ultra Low Noise CMOS RF-LDO™ Regulator Preliminary
Rev. 1.5 September 2001
2
5
ILC7011
VIN
VOUT
4
123
CNOISE
ON
OFF
GND
Pin Number
4
5
2
1
2
Pin Name
ON/OFF
CNOISE
GND
VOUT
VIN
Pin Description
By applying less than 0.4V to this pin the device will be turned off
Noise Bypass Capacitor
Ground pin. Local ground for COUT
Output voltage. Connect COUT between this pin and the GND (pin 3)
Connect Directly to Supply
Pin Description ILC7011 (fixed voltage version)
Parameter
Input Voltage 7011
ON/OFF Input Voltage
Output Current
Output Voltage
Package Power Dissipation
Maximum Juncion Temp. Range
Storage Temperature
Operation Ambient Temperature
Symbol
VIN
VON/OFF
IOUT
VOUT
PD
TJ(MAX)
TSTG
TSTG
Ratings
-0.3 to +9V
-0.3 to VIN
Short Circuit Protected
-0.3 to VIN +0.3
TBD
-40 to +125
-40 to +125
-40 to +125
Units
V
V
mA
V
mW
°C
°C
°C
Pin Package Configurations
80mA SC 70 Ultra Low Noise CMOS RF-LDO™ Regulator Preliminary
Rev. 1.5 September 2001
3
Parameter
Input Voltage Range
Output Voltage Accuracy
Line Regulation
Dropout Voltage (Note 3)
Ground Pin Current
Shutdown (OFF) Current
ON/OFF Input Voltage
ON/OFF Pin Input Current
(Note 5)
Peak Output Current
(Note 4)
Output Noise Voltage
Ripple Rejection
Dynamic Line Regulation
Dynamic Load Regulation
Short Circuit Current
Resistance Shutdown
Discharge
Symbol
VIN
VOUT/(VOUT*VIN)
VIN VOUT
IGND
ION/OFF
VON/OFF
IIN ON/OFF
IOUT (peak)
eN
VOUT/VIN
VOUT(line)
VOUT(load)
ISC
Conditions
VOUT (NOM) + 1V < 8V
IOUT = 10µA
IOUT = 10mA
IOUT = 20mA
IOUT = 80mA
IOUT = 0mA
IOUT = 10mA
IOUT = 80mA
ION/OFF = 0V
High = Regulator On
Low = Regulator Off
V ON/OFF 0.6V Regulator OFF
V ON/OFF 2V Regulator ON
VOUT > 0.95V OUT (NOM), tpw = 2ms
BW = 300Hz to 50kHz, CIN = 1µF
CNOISE = 0.01µF, COUT = 1.0µF, IOUT
= 10mA
COUT = 4.7µF Tantalum
IOUT = 80mA
VIN: VOUT (NOM) + 1V to VOUT
(NOM) + 2V, tr/tf = 2µs; IOUT = 80mA
IOUT: 1mA to 80mA; tr < 5µS
VOUT = 0V
Typ
2.5-8
±1
0.007
0.1
50
70
235
66
67
90
0.1
1.5-2.0
0.6
0.3
1
100-120
TBD
70
50
65
14
40
200
1.5
Units
V
%
%/V
mV
µA
µA
V
µA
mA
µVrms
dB
mV
mV
mA
k
Freq = 1kHz
Freq = 10kHz
Freq = 1MHz
Note 1: Absolute maximum ratings indicate limits which when exceeded may result in damage to the component. Electrical specifications do not apply when operating the
device outside of its rated operating conditions.
Note 2: Specified Min/Max limits are production tested or guaranteed through correlation based on statistical control methods. Measurments are taken at constant junction
temperature as close to ambient as possible using low duty pulse testing.
Note 3 Dropout voltage is defined as the input to output differential voltage at which the output voltage drops 2% below the nominal value measured with a 1V differential.
Note 4: Guaranteed by design
Note 5: The device’s shutdown pin inlcudes a 2Minternal pull down resistor connected to ground.
Electrical Characteristics ILC7011
Unless otherwise specified all limits are at TA= 25°C, VIN = VOUT (NOM) + 1V, IOUT = 1mA, COUT = 1mF, VON/OFF = 2V
80mA SC 70 Ultra Low Noise CMOS RF-LDO™ Regulator Preliminary
Rev. 1.5 September 2001
4
1.15/1.35
.325
.70
.45
.65 .65
1.30
Recommended Mount Pad
1.85
.325
1.80-2.20
0.65 BSC 0.65 BSC 0.15-0.30
c
0.80-1.00
0.78-0.98
0.45-0.60
0.10-0.18
0.02
1.30
x
15°
Output Voltage (V)
2.8
3.0
3.3
3.6
4.7
5.0
Grade
A
A
A
A
A
A
Order Information
ILC7011C5-28
ILC7011C5-30
ILC7011C5-33
ILC7011C5-36
ILC7011C5-47
ILC7011C5-50
Supplied As:
3K Units on Tape and Reel
3K Units on Tape and Reel
3K Units on Tape and Reel
3K Units on Tape and Reel
3K Units on Tape and Reel
3K Units on Tape and Reel
*NOTE: First two characters identify the product and the last two characters identify the datecode
SC-70 Package Markings
ILC7011C5-xx
80mA SC 70 Ultra Low Noise CMOS RF-LDO™ Regulator Preliminary
5
LIFE SUPPORT POLICY
FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORA-
TION. As used herein:
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF
THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE
UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) suppor t or sustain life, and (c) whose failure to perfor m
when properly used in accordance with instr uctions for use
provided in the labeling, can be reasonably expected to
result in a significant injur y of the user.
2. A critical component in any component of a life support
device or system whose failure to perfor m can be reasonably
expected to cause the failure of the life suppor t device or
system, or to affect its safety or effectiveness.
www.fairchildsemi.com
8/28/00 0.0m 001
Stock#DSxxxxxxxx
'2001 Fairchild Semiconductor Cor poration