http://www.tracopower.com Page 1
Models
OrderCode Output Power Output 1 Output 2 Output 3
max. Inom Inom Inom
TML 05105 5 VDC / 1000 mA
TML 05112 12 VDC / 416 mA
TML 05115 15 VDC / 333 mA
TML 05124 5 Watt 24 VDC / 200 mA
TML 05205 5 VDC / 500 mA –5 VDC / 500 mA
TML 05212 12 VDC / 200 mA –12 VDC / 200 mA
TML 05215 15 VDC / 160 mA –15 VDC / 160 mA
TML 10105 5 VDC / 2000 mA
TML 10112 12 VDC / 833 mA
TML 10115 15 VDC / 666 mA
TML 10124 10 Watt 24 VDC / 416 mA
TML 10205 5 VDC / 800 mA –5 VDC / 800 mA
TML 10212 12 VDC / 380 mA –12 VDC / 380 mA
TML 10215 15 VDC / 300 mA –15 VDC / 300 mA
Encapsulated Power Supply
TML Series 5 – 30 Watt
Features
AC/DC Power Modules
PCB Mounting or Chassis Mounting with
Screw Terminals
Fully encapsulated Plastic Case
Single, Dual and Triple Output Models
Universal Input 85-264 VAC, 47 - 440 Hz
High Efficiency
EMI meets EN 55022, Class B and
FCC, Level B
Low Ripple and Noise
Short Circuit and Overload Protection
Safety Class II Product (30 Watt Models)
3 Year Product Warranty The TML Series switching power supplies, offer high power density in a
fully encapsulated module. This feature makes these modules an ideal
solution for all space critical applications in commercial and industrial elec-
tronic equipment. Full compliance to European low voltage and EMC
directive, UL and cUL safety approval qualifies this product for worldwide
markets. SMD-technology and a high efficiency guarantees a high reliabil-
ity of these Power Supplies.
http://www.tracopower.com Page 2
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input voltage range 85 – 264 VAC
Input frequency 47 – 440 Hz
Input current no load 115 VAC/230 VAC
– TML 5 models 10 mA / 15 mA typ.
– TML 10 models 15 mA / 20 mA typ
– TML 15 models 18 mA / 25 mA typ.
– TML 30 models 30 mA / 55 mA typ.
Input current full load 115 VAC/230 VAC
– TML 5 models 160 mA / 80 mA typ.
– TML 10 models 200 mA / 120 mA typ
– TML 15 models 280 mA / 165 mA typ.
– TML 30 models 550 mA / 320 mA typ.
External fuse (recommended) 1.5 A slow blow type
Models
OrderCode Output Power Output 1 Output 2 Output 3
PCB-mounting Chassis mounting max. Inom Inom Inom
TML 15105 TML 15105C 5 VDC/3000 mA
TML 15112 TML 15112C 12 VDC/1250 mA
TML 15115 TML 15115C 15 VDC/1000 mA
TML 15124 TML 15124C 24 VDC/ 625 mA
TML 15205 TML 15205C 15 Watt 5 VDC /1500 mA –5 VDC/1500 mA
TML 15212 TML 15212C 12 VDC/ 650 mA –12 VDC/ 650 mA
TML 15215 TML 15215C 15 VDC/ 500 mA –15 VDC/ 500 mA
TML 15512 TML 15512C 5 VDC /2000 mA 12 VDC/ 200 mA –12 VDC/ 200 mA
TML 15515 TML 15515C 5 VDC/2000 mA 15 VDC/ 150 mA –15 VDC/ 150 mA
TML 30103 TML 30103C 3.3 VDC6000 mA
TML 30105 TML 30105C 5 VDC/6000 mA
TML 30112 TML 30112C 12 VDC/2500 mA
TML 30115 TML 30115C 15 VDC/2000 mA
TML 30124 TML 30124C 24 VDC/1250 mA
TML 30205 TML 30205C 30 Watt 5 VDC/3000 mA –5 VDC/3000 mA
TML 30212 TML 30212C 12 VDC/1300 mA –12 VDC/1300 mA
TML 30215 TML 30215C 15 VDC/1000 mA –15 VDC/1000 mA
TML 30252 TML 30252C *5 VDC/3000 mA *12 VDC/1250 mA
TML 30512 TML 30512C * 5 VDC/3000 mA 12 VDC/ 630 mA –12 VDC/ 630 mA
TML 30515 TML 30515C *5 VDC/3000 mA 15 VDC/ 500 mA –15 VDC/ 500 mA
* Output floating
Encapsulated Power Supply
TML Series 5 – 30 Watt
http://www.tracopower.com Page 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Output Specifications
Voltage set accuracy ± 2 %
Regulation – Input variation 0.3 % max.
– Load variation (10 –100%)
– Single output models 1.0 % max.
– Dual/ triple output models 5 % max.
Minimum load 5 % for TML 30 single output models
10 % on main output of triple output models
Ripple and noise (20 MHz Bandwidth) – 3.3 & 5 VDC output models: < 1.5 % of Vout
– other models: < 1.0 % of Vout
Current limitation 120 – 180 % fold back
Short circuit protection hiccup mode, indefinite (automatic recovery)
Maximum capacitive load 470 – 50’000 µF depending on model
General Specifications
Temperature ranges – Operating – 25 °C…+71 °C
– Power derating above 50°C 3.75 %/°C
– Storage (non operating) – 40 °C…+85 °C
Temperature coefficient 0.02 % / °C
Efficiency 72 – 80 % (depending on model)
Humidity (non condensing) 95 % rel max.
Switching frequency 100 kHz typ. (Puls width modulation PWM)
Hold-up time 40 ms min. ( Vin 115...230 VAC)
Isolation voltage – Input/ Output 3‘000 VAC
Reliability /calculated MTBF (MIL-HDBK-217E) > 660’000 h @ 25°C
EMI / RFI conducted EN 55022, class B, FCC part 15, level B
EMC compliance – Electrostatic discharge ESD IEC / EN 61000-4-2 4 kV / 8 kV
– RF field susceptibility IEC / EN 61000-4-3 3 V/m
– Electrical fast transients/bursts on mainsline IEC / EN 61000-4-4 1 kV
Safety Class II (only 30 watt models) to IEC / EN 60536
Safety standards UL 1950, IEC 60950, EN 60950
Safety approval cUL /UL File E188913
Case material Plastic resin + Fiberglass
(flammability to UL 94-V0)
Encapsulated Power Supply
TML Series 5 – 30 Watt
http://www.tracopower.com Page 4
Specifications can be changed without notice
TML 5 Watt
Pin-Out
Pin Single Dual
1FG FG
2AC in AC in
3AC in AC in
4–V out –V out
5NC Common
6+V out +V out
Pin diameter ø 1.0 mm Weight: 100 g (3.5 oz)
Outline Dimensions mm (inches)
Encapsulated Power Supply
TML Series 5 – 30 Watt
1
2
3
4
5
6
45.0
(1.77)
17.5
±0.3
(
0.69
±0.012)
17.5
±0.3
(
0.69
±0.012)
4.0
(0.16)
47.0
±0.3
(1.85
±0.012
)
55.0
(2.17)
10
±0.3
(0.39
±0.012
)
10
±0.3
(0.39
±0.012
)
20.5
(0.81)
10
(0.39)
Bottom view
Pin-Out
Pin Single Dual
1FG FG
2AC in AC in
3AC in AC in
4–V out –V out
5NC Common
6+V out +V out
TML 10 Watt
Bottom view
1
2
3
4
5
45.0
(1.77)
20.5
(0.79)
10
(0.39)
17.5
±0.3
(
0.69
±0.012
)
4.0
(0.16)
6
17.5
±0.3
(
0.69
±0.012
)
54.0
±0.3
(2.13 ±0.012)
64.0
(2.52)
10
±0.3
(0.39 ±0.012)
10
±0.3
(0.39 ±0.012)
Pin diameter ø 1.0 mm Weight: 80 g (2.8 oz)
Tolerances = 0.5mm (0.02)
( ) = Inches
http://www.tracopower.com Page 5
Specifications can be changed without notice
Pin-Out
Pin Single Dual Triple
1FG FG FG
2AC in AC in AC in
3AC in AC in AC in
4No Pin No Pin –V out 3
5–V out –V out Com. 2/3
6No Pin Common +V out 2
7+V out +V out –V out 1
8No Pin No Pin +V out 1
Outline Dimensions mm (inches)
Pin diameter ø 1.0 mm
Weight: 140 g (4.9 oz)
Encapsulated Power Supply
TML Series 5 – 30 Watt
TML 15 Watt
PCB mounting:
Chassis mounting:
Bottom view
1
2
38
7
6
5
4
54.0
(2.13)
20.0
±0.3
(
0.79
±0.012
)
20.0
±0.3
(
0.79
±0.012
)
6.0
(0.24)
62.0
±0.3
(2.44
±0.012
)
74.0
(2.91)
8.5
±0.3
(0.33
±0.012
)
8.5
±0.3
(0.33
±0.012
)
11.5
±0.3
(0.45
±0.012
)
11.5
±0.3
(0.45
±0.012
)
22.0
(0.87)
10
(0.39)
Top view
54.0
(2.13)
5.0
(0.20)
86.0 ±0.3
(3.39 ±0.012)
96.0
(3.78)
4 x ø3.5
(4 x ø0.14)
1
2
3
8
7
6
5
4
26.5
(1.04)
5.0
(0.20)
46.0 ±0.3
(
1.81
±0.012
)
Weight: 160 g (5.6 oz)
Tolerances = 0.5mm (0.02)
( ) = Inches
Page 6
Specifications can be changed without notice
Outline Dimensions mm (inches)
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: sales@traco.ch • internet: http://www.tracopower.com
Rev. 05/04
Encapsulated Power Supply
TML Series 5 – 30 Watt
TML 30 Watt
PCB mounting:
Pin diameter ø 1.0mm
Weight : 180 g (6.3 oz)
Pin-Out
Pin Single Dual sym. Dual asym. Triple
1AC in AC in AC in AC in
2AC in AC in AC in AC in
3+V out +V out +V out 2 +V out 2
4No Pin No Pin +V out 1 +V out 1
5–V out Common –V out 2 Com. 2/3
6No Pin No Pin –V out 1 –V out 1
7No Pin –V out Not conn. –V out 3
1
27
6
5
4
3
Bottom view
63.5
(2.50)
27.9
±0.3
(
1.10
±0.012
)
3.8
(0.15)
81.3
±0.3
(3.20
±0.012
)
88.9
(3.50)
15.24
±0.3
(0.60
±0.012
)
12.7
±0.3
(0.50
±0.012
)
12.7
±0.3
(0.50
±0.012
)
15.24
±0.3
(0.60
±0.012
)
25.0
(0.98)
6
(0.24)
27.9
±0.3
(
1.10
±0.012
)
Top view
1
2
7
6
5
4
3
29.6
(1.17)
5.0
(0.20)
63.8
(2.51)
50.0 ±0.3
(1.97 ±0.012)
6.0
(0.20)
100.0 ±0.3
(3.94 ±0.012)
112.0
(4.41)
4 x ø3.5
(4 x ø0.14)
Tolerances = 0.5mm (0.02)
Weight : 200 g (7.1 oz)
Chassis mounting:
( ) = Inches
