14.5 APPEARANCE SPECIFICATION
Description Reject criteria
Film dent Dot type D ＞ 0.3 : To be zero
0.3 ≧ D ＞0.2 : To be max 2points
interval of faults is 50mm min.
0.2 ≧ D : None-specify
Foreign
Material
Between
Glass &
Film
Line type
Scratch
W ≧ 0.1 : refer to “Dot type”
0.1 ＞ W ≧ 0.05 With L ≧ 5 : To be zero
0.1 ＞ W ≧ 0.05 With L ＜ 5 : To be max 2points
interval of faults is 50mm min.
0.5 ＞ W : None-specify
W : Width [mm]
L : Length [mm]
Film dot type blur
Film hard-coat
Missing
Area 0.5mm2 ≦ : To be zero
Area 0.3mm2 ≦ ＜ 0.5mm2 : To be max. 5 points
Area 0.3mm2 ≦ : None-specify
Glass flaw To be no flaw which size is over the drawing specified as
Below. Number of flaw is none-specify.
Traveling flaw is none.
Flaw of thickness-direction
Size is glss-thickness max.
2mm
5mm 5mm
3mm
KAOHSIUNG HITACHI
ELECTRONICS CO.,LTD. DATE Mar.25,’10 7B64PS 2714- SP14N01L6ALCA-5 PAGE 14-3/3
Sh.
No.
D2
D1 D1+D2
2 [mm]
