FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 34
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC368LP4 / 368LP4E
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT
v03.0705
General Description
Features
Functional Diagram
Output Power: +15 dBm
Wide Input Power Range: 0 to +10 dBm
100 kHz SSB Phase Noise: -140 dBc/Hz
+5V @ 75 mA Supply
16 mm2 Leadless QFN SMT Package
Electrical Speci cations, TA = +25° C, Vd1 = Vd2 = +5.0 Vdc, +2 dBm Drive Level
Typical Applications
• Microwave Radios & VSAT
• Fiber Optic Infrastructure
• Military Communications & Radar
The HMC368LP4 & HMC368LP4E are miniature
amp-doubler-amps utilizing GaAs PHEMT technology
in 4 x 4 mm leadless surface mount packages. When
driven by a +2 dBm signal, the multiplier provides
+15 dBm typical output power from 9 to 16 GHz. The
Fo and the 3Fo isolations are 18 dB typical. The low
additive SSB phase noise of -140 dBc/Hz at 100 kHz
offset helps the user maintain good system noise
performance. The HMC368LP4(E) is ideal for use
in LO multiplier chains allowing reduced parts count
vs. traditional approaches.
Parameter Min. Typ. Max. Units
Frequency Range, Input 4.5 - 8.0 GHz
Frequency Range, Output 9.0 - 16.0 GHz
Output Power 12 15 dBm
Fo Isolation (with respect to output level) 18 dB
3Fo Isolation (with respect to output level) 18 dB
Input Return Loss 10 dB
Output Return Loss 10 dB
SSB Phase Noise (Fout = 13 GHz, 100 kHz Offset) Pin = +2 dBm -140 dBc/Hz
Supply Current (Idd)* 75 mA
*Adjust Vg1, Vg2 between -2V to 0V to achieve Idd = 75 mA typical
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 35
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Output Power vs.
Temperature @ +2 dBm Drive Level
Output Power vs.
Supply Voltage @ +2 dBm Drive Level
Output Power vs. Drive Level
Input Return Loss vs. Temperature Output Return Loss vs. Temperature
0
2
4
6
8
10
12
14
16
18
20
8 9 10 11 12 13 14 15 16 17
+25C
+85C
-40C
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
0
2
4
6
8
10
12
14
16
18
20
8 9 10 11 12 13 14 15 16 17
0 dBm
+2 dBm
+5 dBm
+10 dBm
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
0
2
4
6
8
10
12
14
16
18
20
8 9 10 11 12 13 14 15 16 17
4.5V
5.0V
5.5V
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
456789
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
8 9 10 11 12 13 14 15 16 17
+25 C
+85 C
-40 C
OUTPUT RETURN LOSS (dB)
FREQUENCY (GHz)
Isolation @ +2 dBm Drive Level
-30
-20
-10
0
10
20
8 9 10 11 12 13 14 15 16 17
Fo
2Fo
3Fo
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
HMC368LP4 / 368LP4E
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT
v03.0705
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 36
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Output Spectrum @ Fin = 6.5 GHz,
Pin = +2 dBm
SSB Phase Noise
Performance, Fout = 13 GHz,
Input Power = +2 dBm
-55
-45
-35
-25
-15
-5
5
15
25
4 8 12 16 20 24 28
OUTPUT POWER (dB)
FREQUENCY (GHz)
-180
-150
-120
-90
-60
-30
0
102103104105106107
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
Output Power vs. Input Power
@ Three Frequencies
-10
-5
0
5
10
15
20
-5 -2 1 4 7 10
9GHz
12GHz
16GHz
OUTPUT POWER (dBm)
INPUT POWER (dBm)
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT
v03.0705
HMC368LP4 / 368LP4E
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 37
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Absolute Maximum Ratings
Outline Drawing
Typical Supply Current vs. Vdd
Vdd (V) Idd (mA)
4.5 73
5.0 75
5.5 77
RF Input (Vdd = +5V) +20 dBm
Supply Voltage, Vd1, Vd2 +6.0V
Gate Bias Voltage (Vg1, Vg2) -4 to 0 Vdc
Channel Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 12.5 mW/°C above 85 °C) 812 mW
Thermal Resistance
(junction to ground paddle) 80 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Note: Amp-Doubler-Amp will operate over full voltage
range shown above.
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT
v03.0705
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC368LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H368
XXXX
HMC368LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H368
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
HMC368LP4 / 368LP4E
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 38
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Pin Description
Pin Number Function Description Interface Schematic
1, 5-14,
18, 19, 24 N/C No Connection. These pins may be connected to RF
ground. Performance will not be affected.
3 RFIN Multiplier Input. AC Coupled.
No external DC blocks required.
2, 4, 15, 17 GND All ground leads and ground paddle must be soldered
to PCB RF/DC ground.
16 RFOUT Multiplied Output. AC coupled.
No external DC blocks necessary.
20, 22 Vd2, Vd1 Drain supply voltage 5V ± 0.5V.
21, 23 Vg2, Vg1
Gate supply voltages.
Adjust between -2 Vdc to 0 Vdc
to achieve 75 mA drain current.
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT
v03.0705
HMC368LP4 / 368LP4E
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 39
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Evaluation PCB
List of Materials for Evaluation PCB 107846 [1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 - J7 DC Pin
C1 - C4 100 pF capacitor, 0402 Pkg.
C5 - C8 2.2 μF capacitor, case size A
U1 HMC368LP4 / HMC368LP4E Amp-x2-Amp
PCB [2] 107844 PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the nal application should
be generated with proper RF circuit design tech-
niques. Signal lines should have 50 ohm imped-
ance while the package ground leads and exposed
paddle should be connected directly to the ground
plane similar to that shown. The evaluation circuit
board shown is available from Hittite upon request.
SMT GaAs PHEMT MMIC
AMP-DOUBLER-AMP, 9 - 16 GHz OUTPUT
v03.0705
HMC368LP4 / 368LP4E
