2013-07-15 DURIS(R) S 8 Datasheet Draft Version 0.0 GW P9LRS1.EM Features: Besondere Merkmale: * Package: white SMT package, colored diffused silicone resin * Viewing angle at 50 % IV: 120 * Color: 2700 K - 4000 K ( white ) * CRI: min. 80 ( typ. 82 ) * Luminous Flux: typ. 500 lm @ 3000 K * Luminous efficacy: typ. 94 lm/W @ 3000 K * Lumen Maintenance: Testing according to IESNA LM-80 in progress * Gehausetyp: weies SMT Gehause, farbiger diffuser Silikon-Verguss * Abstrahlwinkel bei 50 % IV: 120 * Farbe: 2700 K - 4000 K ( wei ) * CRI: min. 80 ( typ. 82 ) * Lichtstrom: typ. 500 lm @ 3000 K * Lichtausbeute: typ. 94 lm/W @ 3000 K * Lichtstromerhaltung: Tests nach IESNA LM-80 im Gange Applications * * * * Anwendungen Directional retrofits Downlights Omnidirectional retrofits Spot lights 2013-07-15 DRAFT - For Reference only. Subject to change. * * * * 1 Direktionale Retrofits Downlights Omnidirektionale Retrofits Spot-Leuchten Draft Version 0.0 GW P9LRS1.EM Ordering Information Bestellinformation Type: Color Temperature Luminous Flux Ordering Code Typ: Farbtemperatur Lichtstrom Bestellnummer 1) page 22 1) Seite 22 IF = 200 mA GW P9LRS1.EM-PQPS-40S3 [K] V [lm] 4000 484 ... 610 Q65111A4929 GW P9LRS1.EM-PQPS-40S5 4000 484 ... 610 Q65111A4928 GW P9LRS1.EM-PPPS-30S3 3000 450 ... 610 Q65111A4932 GW P9LRS1.EM-PPPS-30S5 3000 450 ... 610 Q65111A4931 GW P9LRS1.EM-PPPR-27S3 2700 450 ... 563 Q65111A4936 GW P9LRS1.EM-PPPR-27S5 2700 450 ... 563 Q65111A4935 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page ). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. GW P9LRS1.EM-PPPS-30S3 means that only one group PP, PQ, PR, PS will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable. Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite ). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. GW P9LRS1.EM-PPPS-30S3 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen PP, PQ, PR, PS enhalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. 2013-07-15 DRAFT - For Reference only. Subject to change. 2 Draft Version 0.0 GW P9LRS1.EM Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 110 C Storage temperature range Lagertemperatur Tstg -40 ... 125 C Junction temperature Sperrschichttemperatur Tj 125 C Forward current Durchlassstrom (TS = 25 C) IF 10 ... 240 mA Surge current Stostrom (t <= 10 s; D = 0.005; TS = 25 C) IFM 400 mA Reverse current 2) page 22 Sperrstrom 2) Seite 22 IR 20 mA ESD withstand voltage ESD Festigkeit (acc. to ANSI/ESDA/JEDEC JS-001 - HBM) VESD up to 5 kV 2013-07-15 DRAFT - For Reference only. Subject to change. 3 Draft Version 0.0 GW P9LRS1.EM Characteristics (TS = 25 C; IF = 200 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2 120 Forward voltage 3) page 22 Durchlassspannung 3) Seite 22 (min.) (typ.) (max.) VF VF VF 24.8 26.6 29.6 V V V Reverse voltage Sperrspannung (IR = 20 mA) (max.) VR 1.2 V Color reproduction index 4) page 22 Farbwiedergabe Index 4) Seite 22 (typ.) (min.) Ra Ra 82 80 - Real thermal resistance junction / solder point (typ.) (max.) Rth JS real Rth JS real 5.4 6.5 K/W K/W "Electrical" thermal resistance junction / solder point 5) page 22 "Elektrischer" Warmewiderstand Sperrschicht / Lotpad 5) Seite 22 (with efficiency e = 30 %) (typ.) (max.) Rth JS el Rth JS el 3.8 4.5 K/W K/W 2013-07-15 4 5) page 22 Realer Warmewiderstand Sperrschicht / Lotpad 5) Seite 22 DRAFT - For Reference only. Subject to change. Draft Version 0.0 GW P9LRS1.EM Brightness Groups Helligkeitsgruppen Group Luminous Flux Luminous Flux Luminous Flux Luminous Flux Gruppe Lichtstrom Lichtstrom Lichtstrom Lichtstrom TJ = 25 C TJ = 25 C TJ = 100 C TJ = 100 C (min.) V [lm] (max.) V [lm] (extrapolated min.) V [lm] (extrapolated max.) V [lm] PP 450 484 387 416 PQ 484 520 416 447 1) page 22 1) Seite 22 1) page 22 1) Seite 22 6) page 22 6) Seite 22 6) page 22 6) Seite 22 PR 520 563 447 484 PS 563 610 484 525 PT 610 658 525 566 PU 658 710 566 611 Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered. Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen besteht. Einzelne Helligkeitsgruppen sind nicht bestellbar. 2013-07-15 DRAFT - For Reference only. Subject to change. 5 Draft Version 0.0 GW P9LRS1.EM Chromaticity Coordinate Groups (IF = 200 mA, extrapolated to TJ = 100 C) 7) page 22 , 6) page 22 Farbortgruppen 7) Seite 22 , 6) Seite 22 Cy 0.440 27S5 0.420 30S5 27S3 35S5 30S3 0.400 40S5 35S3 0.380 45S5 warm white 0K 350 50S5 45S3 0.360 0K 400 50S3 57S5 0K 450 0.340 57S3 65S5 65S3 0.320 K 00 65 0.300 0.300 2700 K 0K 300 40S3 neutral white K 00 50 K 00 57 cool white 0.320 0.340 0.360 0.380 0.400 2013-07-15 DRAFT - For Reference only. Subject to change. 0.420 0.440 0.460 0.480 0.500 Cx Coordinates in reference to CIE 1931 (cx cy) 6 Draft Version 0.0 GW P9LRS1.EM Color Chromaticity Groups (IF = 200 mA, extrapolated to TJ = 100 C) 7) page 22 , 6) page 22 Farbortgruppen 7) Seite 22 , 6) Seite 22 Group Cx Cy a b 40S3 0.3823 0.3790 0.0094 0.0040 53 40S5 0.3823 0.3790 0.0156 0.0067 53 30S3 0.4339 0.4020 0.0085 0.0041 53 30S5 0.4339 0.4020 0.0142 0.0068 53 27S3 0.4578 0.4092 0.0079 0.0041 54 27S5 0.4578 0.4092 0.0132 0.0068 54 Note: Cx and Cy are the center coordinates of the ellipse, a the length of the major axis, b the length of the minor axis and the angle of the major axis as defined in IEC 68001. Anm.: Cx und Cy sind die Mittelpunktkoordinaten der Ellipse, a die Lange der Hauptachse, b die Lange der Nebenachse und der Winkel der Hauptachse wie in IEC 68001 definiert. 2013-07-15 DRAFT - For Reference only. Subject to change. 7 Draft Version 0.0 GW P9LRS1.EM Group Name on Label Gruppenbezeichnung auf Etikett Example: PP-30S3 Beispiel: PP-30S3 Brightness Helligkeit Chromaticity Coordinate Farbort PP 30S3 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. 2013-07-15 DRAFT - For Reference only. Subject to change. 8 Draft Version 0.0 GW P9LRS1.EM Relative Spectral Emission - V() = Standard eye response curve 8) page 22 Relative spektrale Emission - V() = spektrale Augenempfindlichkeit 8) Seite 22 rel = f (); TS = 25 C; IF = 200 mA Irel GW P9LRS1.EM 1.0 : warm white : V 0.8 0.6 0.4 0.2 0.0 350 400 450 500 550 600 650 700 750 800 [nm] Radiation Characteristics 8) page 22 Abstrahlcharakteristik 8) Seite 22 Irel = f (); TS = 25 C GW P9LRS1.EM [] -10 0 10 -20 20 30 40 50 60 70 80 90 1.0 -30 -40 0.8 -50 0.6 -60 0.4 -70 0.2 -80 0.0 -90 -100 2013-07-15 DRAFT - For Reference only. Subject to change. 9 Irel Draft Version 0.0 GW P9LRS1.EM Forward Current 8) page 22 Durchlassstrom 8) Seite 22 Relative Luminous Flux 8) page 22 Relativer Lichtstrom 8) Seite 22 IF = f (VF); TS = 25 C V/V(200 mA) = f(IF); TS = 25 C V GW P9LRS1.EM IF [mA] GW P9LRS1.EM V(200mA) 1.2 200 1.0 0.8 150 0.6 100 0.4 0.2 50 0.0 22 24 10 26 Chromaticity Coordinate Shift 8) page 22 Farbortverschiebung 8) Seite 22 Cx, Cy = f(IF); TS = 25 C GW P9LRS1.EM Cx Cy 0.43 0.42 0.41 0.40 : Cx : Cy 0.39 0 10 0 15 0 20 IF [mA] 2013-07-15 DRAFT - For Reference only. Subject to change. 0 10 0 15 0 20 IF [mA] VF [V] 50 50 10 Draft Version 0.0 GW P9LRS1.EM Relative Forward Voltage 8) page 22 Relative Vorwartsspannung 8) Seite 22 Relative Luminous Flux 8) page 22 Relative Lichtstrom 8) Seite 22 VF = VF - VF(25C) = f(Tj); IF = 200 mA V/V(25 C) = f(Tj); IF = 200 mA GW P9LRS1.EM v VF [V] GW P9LRS1.EM 1.2 v(25C) 1.5 1.0 1.0 0.8 0.5 0.6 0.0 0.4 -0.5 0.2 -1.0 -40 -20 0 20 40 60 0.0 -40 -20 80 100 120 Tj [C] Cx, Cy = f(Tj); IF = 200 mA GW P9LRS1.EM Cx Cy 0.43 0.42 0.41 0.40 : Cx : Cy -20 0 20 40 60 80 100 120 Tj [C] 2013-07-15 DRAFT - For Reference only. Subject to change. 20 40 60 80 100 120 Tj [C] Chromaticity Coordinate Shift 8) page 22 Farbortverschiebung 8) Seite 22 -40 0 11 Draft Version 0.0 GW P9LRS1.EM Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF = f (T) IF [mA] GW P9LRS1.EM 260 240 220 200 180 160 140 : TS 120 100 80 60 40 Do not use below 10 mA 20 0 0 20 40 60 80 100 120 TS [C] 2013-07-15 DRAFT - For Reference only. Subject to change. 12 Draft Version 0.0 GW P9LRS1.EM Package Outline 9) page 22 Mazeichnung 9) Seite 22 Approximate Weight: 70.0 mg Gewicht: 70.0 mg Mark: Cathode Markierung: Kathode ESD information: LED is protected by ESD device which is connected in parallel to LED-Chip. ESD Information: Die LED enthalt ein ESD-Bauteil, das parallel zum Chip geschalten ist. 2013-07-15 DRAFT - For Reference only. Subject to change. 13 Draft Version 0.0 GW P9LRS1.EM Recommended Solder Pad 9) page 22 Empfohlenes Lotpaddesign 9) Seite 22 Reflow soldering Reflow-Loten Note: Package not suitable for ultra sonic cleaning. For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet. Um eine verbesserte Lotstellenkontaktierung zu erreichen, empfehlen wir, unter StandardStickstoffatmosphare zu loten. 2013-07-15 DRAFT - For Reference only. Subject to change. 14 Draft Version 0.0 GW P9LRS1.EM Reflow Soldering Profile Reflow-Lotprofil Preconditioning: JEDEC Level 3 acc. to JEDEC J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 s 300 250 t OHA04612 Profile Feature Profil-Charakteristik Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up rate to preheat*) 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2013-07-15 DRAFT - For Reference only. Subject to change. C 15 s Draft Version 0.0 GW P9LRS1.EM Method of Taping 9) page 22 Gurtung 9) Seite 22 2013-07-15 DRAFT - For Reference only. Subject to change. 16 Draft Version 0.0 GW P9LRS1.EM Tape and Reel Gurtverpackung 12 mm tape with 500 pcs. on 180 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm (inch) Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 +0.3/-0.1 4 0.1 (0.157 0.004) 4 0.1 (0.157 0.004) or 8 0.1 (0.315 0.004) 2 0.05 (0.079 0.002) 1.5 0.1 (0.059 + 0.004) 1.75 0.1 (0.069 0.004) 5.5 0.05 (0.217 0.002) Reel dimensions in mm (inch) Reel dimensions in mm (inch) A W Nmin W1 W2max 180 (7) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 2013-07-15 DRAFT - For Reference only. Subject to change. 17 Draft Version 0.0 GW P9LRS1.EM Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE l LE k, see labe ). code (RH blan If bar . idity RH hum 0% e tive C/6 red kag rela 30 pac _ < infra of rs 90% to ak rs < ns ed (pe UC e). or rs con Hou SEN rs Hou ND and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM r pro < time r 23 time at t will C). l with fact r ent MO . Floo time TO at at r Floo l ths tha tica d ival ure OP Floo 4 if: rea w Floo labe mon iden 5 ced equ el ices g, n e 5a is el belo or 24 pro 6 Lev e dev : ntin el whe cod e , w, e Lev el see e bag Lev l dat mou bak bar ned stur e Lev reflo 10% led stur e time sea for ore> ope e Moi r see stur k, is . sea is has k, Moi stur bef d 033 Moi in Floo RH blan Moi or-p blan in bag Car ing, r TDlife (if . If r lf J-S thisvapp. d with 10%bak or Yea _ eks rs < r w, icat met 1 Yea tem d, She at nte uire not > y 1 WeHou DEC Afte Ind 1. 4 uire reflo is 2. bod Mou red req /JE time 168 req : 2b r a) Sto ices idity time is IPC r or time b) ned Floo r Hum ing ce time Dev 2a e r Floo a) ope 3. b) bakren Floo 1 l dat Floo If 2 refe time el 4. 2a el sea 3 Lev el and e Lev el Bag e e Lev stur e Lev Dat stur e Moi stur Moi stur Moi Moi Barcode label N s IVE S Otain TOR SIT O S R A M TI U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2013-07-15 DRAFT - For Reference only. Subject to change. 18 Draft Version 0.0 GW P9LRS1.EM Transportation Packing and Materials Kartonverpackung und Materialien Barcode label MY DE 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ Mu POU GR 44 ) D/C : 01 00 (9D 4 20 23 Y: QT H1 O Se SR mi AM co nd O uc pt to o H rs NO TC BA 3G ) : 12 (6P T LO ) (1T : NO OD PR (X) DE 1 R1 8 Q- lti LS TO Y T6 PL 76 1+ POU GR (G) 44 Mu MY ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: 8 : 01 99 D/C ) O SR AM 21 00 (9D 00 21 : 4 20 QT Y: H1 23 O P: Muster Se SR m A ico M nd O uc pt to o H rs NO TC (Q) 3G : 12 BA 5 14 2 110 0 5 ) 998 021 210 (X) PR OD NO : (1T ) 11 00 LO T 14 2 NO (6P : ). NO see labe (G) l k, N O TI U A C (Q) L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con s UR ces 24 6 dat e MIC 40 be tim C e ThiISTSE pro < tory tim . or t with 23 tim e at t will C) or fac MO . Flo al len tim TO s at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re led tim sea for istu ore> re ope e Mo see 3 istu is or . sea is has Mo nk, bef istu nk, Flo , rd -03 Mo in RH bla Mo or-p bla in bag ingCa r TD life (if If with t. r lf vapp. 10%baktor J-S this Yea , _ eks < r ed ica med, C 1 urs Yea tem She ow at uire not > y 1 WeHo unt DE Afte Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim s 168 req : e 2b a) Sto tim or mid is IPC tim e vice or b) or ned Flo Hu tim ing ce or De e 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev el and Lev el re Bag te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo P: Muster ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label Packing Sealing label OHA02044 Dimensions of transportation box in mm (inch): Width / Breite Length / Lange Height / Hohe 195 5 (7.677 0.1968) 195 5 (7.677 0.1968) 30 5 (1.181 0.196) 2013-07-15 DRAFT - For Reference only. Subject to change. 19 Draft Version 0.0 GW P9LRS1.EM Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Low risk (exposure time 100 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Low risk (Expositionsdauer 100 s). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporar eingeschranktes Sehvermogen oder auch Nachbilder zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. This LED contains metal materials. Corroded metal may lead to a worsening of the optical performance of the LED and can in the worst case lead to a failure of the LED. Do not expose this LED to aggressive atmospheres. Note, that corrosive gases may as well be emitted from materials close to the LED in the final product. Diese LED enthalt teilweise metallische Bestandteile. Korrodiertes Metall kann zu einer Verschlechterung der optischen Eigenschaften und im schlimmsten Fall zum Ausfall der LED fuhren. Diese LED darf aggressiven Bedingungen nicht ausgesetzt werden. Es ist zu beachten, dass korrosive Gase auch von Materialien emittiert werden konnen, die sich im Endprodukt in unmittelbarer Umgebung der LED befinden. Change management for this component is aligned with the requirements of the lighting market. Das Anderungsmanagement dieses Bauteils ist an den Anforderungen des Lichtmarktes ausgerichtet. 2013-07-15 DRAFT - For Reference only. Subject to change. 20 Draft Version 0.0 GW P9LRS1.EM Disclaimer Disclaimer OSRAM OS assumes no liability whatsoever for any use of this document or its content by recipient including, but not limited to, for any design in activities based on this preliminary draft version. OSRAM OS may e.g. decide at its sole discretion to stop developing and/or finalising the underlying design at any time. OSRAM OS ubernimmt keine wie auch immer geartete Haftung fur die Nutzung dieses Dokuments und seines Inhaltes durch den Empfanger, insbesondere nicht fur irgendwelche Design-Aktivitaten, die auf dieser vorlaufigen Entwurfsversion basieren. OSRAM OS behalt sich beispielsweise auch vor, jederzeit die Weiter- und Fertigentwicklung des zugrundeliegenden Designs einseitig einzustellen. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2013-07-15 DRAFT - For Reference only. Subject to change. 21 Draft Version 0.0 GW P9LRS1.EM Glossary Glossar 1) Brightness: Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 1) Helligkeit: Helligkeitswerte werden mit Stromeinpragedauer von 25 ms und Genauigkeit von 11% ermittelt. 2) Reverse Operation: A minimum of 10 hours of reverse operation is permisable in total. 2) Betrieb in Sperrrichtung: Eine Gesamtbetriebszeit von wenigstens 10 Stunden in Sperrrichtung ist gewahrleistet. 3) Forward Voltage: Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. 3) Durchlassspannung: Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 4) Color reproduction index: Color reproduction index values (CRI-RA) are measured during a current pulse of typically 25 ms and with a tolerance of 3. 4) Farbwiedergabe Index: Werte des Farbwiedergabe Index (CRI-RA) werden wahrend eines Strompulses einer typischen Dauer von 25 ms und mit einer Genauigkeit 3 gemessen. 5) Thermal Resistance: Rth max is based on statistic values (6). 5) Warmewiderstand: Rth statistischen Werten (6). 6) Extrapolated Values: The stated values are extrapolated data. These values are based on the devices testing limits. The extrapolation is based on the typical temperature and forward current characteristics of the device. 6) Extrapolierte Werte: Bei den angegebenen Werten handelt es sich um extrapolierte Angaben. Diese basieren auf den fur das Bauteil spezifizierten Testgrenzen. Die Extrapolation erfolgte anhand der typischen Temperatur- und Stromabhangigkeit des Bauteils. 7) Chromaticity coordinate groups: Chromaticity coordinate groups are tested at a junction temperature of 25 C, a current pulse duration of 25 ms and a tolerance of 0.01. For testing the chromaticity coordinate ellipses are approximated with polygons. 7) Farbortgruppen: Farbortgruppen werden bei einer Sperrschichttemperatur von 25 C, mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0,01 ermittelt. Beim Testen werden die Ellipsen durch Polygonzuge angenahert. 8) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 8) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 9) Tolerance of Measure: Dimensions are specified as follows: mm (inch). 9) Matoleranz: Mae angegeben: mm (inch). 2013-07-15 DRAFT - For Reference only. Subject to change. 22 max werden basiert wie einer einer auf folgt Draft Version 0.0 GW P9LRS1.EM Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2013-07-15 DRAFT - For Reference only. Subject to change. 23