HCPL0452, HCPL0453, HCPL0500, HCPL0501, HCPL0530, HCPL0531, HCPL0534 High Speed Transistor Optocouplers Single Channel: HCPL0452 HCPL0453 HCPL0500 HCPL0501 Dual Channel: HCPL0530 HCPL0531 HCPL0534 Features Description High speed - 1 MBit/s The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor housed in a compact 8-pin small outline package. 15kV/s minimum commone mode transient immunity at VCM = 1500V (HCPL0453/0534) Open collector output Guaranteed performance over temperature: 0C to 70C U.L. recognized (File # E90700) VDE0884 recognized (file#136616) - approval pending for HCPL0530/0531/0453 - ordering option V, e.g., HCPL0500V BSI recognized (file# 8661, 8662) - HCPL0452/0500/0501 only A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The HCPL04XX devices do not have the base bonded out to a lead for additional noise margin. The HCPL053X devices have two channels per package for optimum mounting density. Truth Table Applications (positive Logic) Line receivers Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling LED VO ON LOW OFF HIGH Schematics N/C 1 8 VCC + 1 8 VCC V F1 + 2 V 7 VB* _ 2 7 V01 3 6 V02 F _ 3 6 VO _ V N/C 4 5 GND HCPL0500, HCPL0501 *BASE NOT CONNECTED F2 + 4 5 GND HCPL0530/HCPL0531/HCPL0534 FOR HCPL0452, HCPL0453 (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 www.fairchildsemi.com HCPL0XXX -- High Speed Transistor Optocouplers April 2009 Symbol Parameter Value Units TSTG Storage Temperature -40 to +125 C TOPR Operating Temperature -40 to +85 C Reflow Temperature Profile (Refer to page 11) EMITTER IF (avg) DC/Average Forward Input Current 25 mA IF (pk) Peak Forward Input Current (50% duty cycle, 1ms P.W.) 50 mA Peak Transient Input Current - ([1s P.W., 300 pps) 1.0 A IF (trans) VR Reverse Input Voltage 5 V PD Input Power Dissipation 45 mW Average Output Current (Pin 6) 8 mA IO (pk) Peak Output Current 16 mA VEBR Emitter-Base Reverse Voltage (HCPL0500/HCPL0501 only) 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage -0.5 to 20 V IB Base Current (HCPL0500/HCPL0501 only) 5 mA PD Output power dissipation 100 mW DETECTOR IO (avg) (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 www.fairchildsemi.com 2 HCPL0XXX -- High Speed Transistor Optocouplers Absolute Maximum Ratings (TA = 25C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit 1.7 V EMITTER VF Input Forward Voltage IF = 16mA, TA = 25C All 1.45 IF = 16mA 1.8 Input Reverse Breakdown Voltage IR = 10A All VF / TA Temperature Coefficient of Forward Voltage IF = 16mA All -1.6 IF = 0mA, VO = VCC = 5.5V, TA = 25C All 0.001 0.5 IF = 0mA, VO = VCC = 15V, TA = 25C All 0.005 1 IF = 0 mA, VO = VCC = 15V All BVR 5.0 V mV/C DETECTOR IOH ICCL Logic High Output Current Logic Low Supply Current IF = 16mA, VO = Open, VCC = 15V 50 HCPL0452/3/ 0500/1 120 HCPL0530/1/4 ICCH Logic High Supply Current A 200 A 400 IF = 0mA, VO = Open, VCC = 15V, TA = 25C All 0.01 1 IF = 0mA, VO = Open, VCC = 15V HCPL0452/3/ 0500/1 2 HCPL0530/1/4 4 A Transfer Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. HCPL0500/0530 7 2.7 50 HCPL0452/3 19 27 50 Unit COUPLED CTR Current Tranfer Ratio (Note 1) IF = 16mA, VO = 0.4V, VCC = 4.5V, TA = 25C % HCPL0501/0531 IF = 16mA, VO = 0.5V, VCC = 4.5V HCPL0500 5 30 HCPL0452/3 15 30 HCPL0501/0534 VOL Logic Low Output Voltage IF = 16mA, IO = 1.1mA, VCC = 4.5V, TA = 25C HCPL0500 IF = 16mA, IO = 3mA, VCC = 4.5V, TA = 25C HCPL0452/3 HCPL0501/0531/4 IF = 16mA, IO = 0.8mA, VCC = 4.5V IF = 16mA, IO = 2.4mA, VCC = 4.5V 0.18 HCPL0530 0.4 V 0.5 0.25 0.4 HCPL0500 HCPL0530 0.13 0.5 HCPL0452/3 0.23 0.5 HCPL0501/0531/4 *All typicals at TA = 25C (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 www.fairchildsemi.com 3 HCPL0XXX -- High Speed Transistor Optocouplers Electrical Characteristics (TA = 0 to 70C unless otherwise specified) Switching Characteristics TVCC = 5V) Symbol TPHL TPLH |CMH| |CML| Parameter Propagation Delay Time to Logic LOW Propagation Delay Time to Logic HIGH Common Mode Transient Immunity at Logic HIGH Common Mode Transient Immunity at Logic LOW Test Conditions Device Min. Typ.* Max. Unit TA = 25C, RL = 4.1k, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 0.45 1.5 RL = 1.9k, IF = 16mA, TA = 25C (Note 3) (Fig. 9) HCPL0452/3 0.45 0.8 s HCPL0501/0531/4 RL = 4.1k, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 2.0 RL = 1.9k, IF = 16mA (Note 3) (Fig. 9) HCPL0452/3 1.0 HCPL0501/0531/4 TA = 25C, RL = 4.1k, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 0.5 1.5 RL = 1.9k, IF = 16mA, TA = 25C (Note 3) (Fig. 9) HCPL0452/3 0.3 0.8 s HCPL0501/0531/4 RL = 4.1k, IF = 16mA (Note 2) (Fig. 9) HCPL0500/0530 2.0 RL = 1.9k, IF = 16mA (Note 3) (Fig. 9) HCPL0452/3 1.0 HCPL0501/0531/4 IF = 0mA, VCM = 10VP-P, RL = 4.1kV, TA = 25C (Note 4) (Fig. 10) HCPL0500 1,000 10,000 IF = 0mA, VCM = 10VP-P, RL = 1.9k TA = 25C, (Note 4) (Fig. 10) HCPL0452 1,000 10,000 HCPL0534 15,000 40,000 IF = 16mA, VCM = 1500VP-P, RL = 1.9, TA = 25C (Note 4) (Fig. 10) HCPL0453 15,000 40,000 IF = 16mA, VCM = 10VP-P, RL = 4.1k, TA = 25C (Note 4) (Fig. 10) HCPL0500 1,000 10,000 IF = 16 mA, VCM = 10 VP-P, RL = 1.9k (Note 4) (Fig. 10) HCPL0452 1,000 10,000 HCPL0534 15,000 40,000 HCPL0453 15,000 40,000 V/s HCPL0530 HCPL0501/31 V/s HCPL0530 HCPL0501/31 IF = 16mA, TA = 25C, VCM = 1500 VP-P, CL = 15pF) (Note 4) (Fig. 10) Isolation Characteristics Symbol Characteristics Test Conditions Min. VISO Input-Output Isolation Voltage f = 60 Hz, t = 1.0 min., II-O 2A (Note 5, 6) 2500 RISO Isolation Resistance VI-O = 500V (Note 5) 1011 CISO Isolation Capacitance VI-O = 0 , f = 1.0MHz (Note 5) Typ.* Max . Unit VacRMS 0.2 pF *All typicals at TA = 25C (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 www.fairchildsemi.com 4 HCPL0XXX -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified) 1 Current Transfer Ratio is designed as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 2. The 4.1 k load represents 1 LSTTL unit load of 0.36 mA and 6.1k pull-up resistor. 3. The 1.9 k load represents 1 TTL unit load of 1.6 mA and 5.6 k pull-up resistor. 4. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V). 5. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 6. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration. (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 www.fairchildsemi.com 5 HCPL0XXX -- High Speed Transistor Optocouplers Notes Fig. 2 Normalized CTR vs. Temperature 1.2 1.0 1.0 NORMALIZED CTR NORMALIZED CTR Fig. 1 Normalized CTR vs. Forward Current 1.2 0.8 0.6 0.4 VO = 0.4 V VCC = 5 V TA = 25C Normalized to: IF = 16 mA 0.2 0.0 0.1 1 0.8 0.6 0.4 10 0.0 -60 100 -40 -20 IF - FORWARD CURRENT (mA) 20 40 60 80 100 80 100 Fig. 4 Logic High Output Current vs. Temperature 1000 TA = 25C VCC = 5 V 14 IOH - LOGIC HIGH OUTPUT CURRENT (nA) 16 IO - OUTPUT CURRENT (mA) 0 TA - TEMPERATURE (C) Fig. 3 Output Current vs. Output Voltage IF = 40 mA IF = 35 mA 12 IF = 30 mA 10 IF = 25 mA 8 IF = 20 mA 6 IF = 15 mA 4 IF = 10 mA 2 IF = 5 mA 0 2 4 6 8 10 12 14 16 18 IF = 0 mA VCC = 5 V VO = 5 V 100 10 1 0.1 -60 0 20 -40 -20 20 40 60 Fig. 6 Propagation Delay vs. Load Resistance Fig. 5 Propagation Delay vs. Temperature 800 10000 700 RL = 4.1 K (TPLH) TP - PROPAGATION DELAY (ns) 600 0 TA - TEMPERATURE (C) VO - OUTPUT VOLTAGE (V) Tp - PROPAGATION DELAY (ns) IF = 16mA VCC = 5 V VO = 0.4 V Normalized to: TA = 25C 0.2 RL = 4.1 K (TPLH) 500 400 300 200 RL = 1.9 K (TPHL) IF = 16 mA VCC = 5 V RL = 1.9 K (TPLH) 100 IF - 16 mA (TPHL) IF - 10 mA (TPHL) 1000 IF - 16 mA (TPLH) IF - 10 mA (TPLH) 0 -60 -40 -20 0 20 40 60 80 100 100 1 TA - TEMPERATURE (C) (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 VCC = 5 V TA = 25C 10 RL = LOAD RESISTANCE (k) www.fairchildsemi.com 6 HCPL0XXX -- High Speed Transistor Optocouplers Typical Performance Curves Noise Shield 8 + 2 7 VF - 3 6 4 5 VCC VB Pulse Generator tr = 5ns Z O = 50 +5 V 10% DUTY CYCLE I/f < 100S RL VO IF MONITOR 0.1 F 1 Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501 8 VCC +5 V RL VF1 - 7 2 V01 VO C L = 1.5 F 3 6 4 5 VF2 + Rm C L = 1.5 F GND Noise Shield + - VO I F Monitor Rm IF V02 0.1 F GND Test Circuit for HCPL0530, HCPL0531 and HCPL0534 IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Fig. 7 Switching Time Test Circuit IF 1 Noise Shield 8 + 2 A B 7 VCC + +5 V IF VB VF1 - RL Noise Shield 1 8 VCC +5 V RL 2 7 3 6 4 5 V01 VO A VF - 3 6 VO B VO VFF 0.1 F VFF 4 5 + GND VF2 + - V02 0.1 F GND VCM - + Pulse Gen VCM - Pulse Gen Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501 Test Circuit for HCPL0530, HCPL0531 and HCPL0534 VCM 10 V 0V 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Fig. 8 Common Mode Immunity Test Circuit (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 www.fairchildsemi.com 7 HCPL0XXX -- High Speed Transistor Optocouplers Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100s 1 8-pin SOIC Surface Mount 8 0.164 (4.16) 0.144 (3.66) SEATING PLANE 1 0.202 (5.13) 0.182 (4.63) 0.010 (0.25) 0.006 (0.16) 0.143 (3.63) 0.123 (3.13) 0.021 (0.53) 0.011 (0.28) 0.008 (0.20) 0.003 (0.08) 0.244 (6.19) 0.224 (5.69) 0.050 (1.27) Typ. Lead Coplanarity: 0.004 (0.10) MAX Recommended Pad Layout 0.024 (0.61) 0.060 (1.52) 0.275 (6.99) 0.155 (3.94) 0.050 (1.27) Dimensions in inches (mm). Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 www.fairchildsemi.com 8 HCPL0XXX -- High Speed Transistor Optocouplers Package Dimensions Option Order Entry Identifier V V R2 R2 R2V R2V Description VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534) Tape and reel (2500 units per reel) VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534), Tape and reel (2500 units per reel) Marking Infomation 1 500 V X YY S 3 2 6 5 4 Definitions (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code, e.g., `3' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code www.fairchildsemi.com 9 HCPL0XXX -- High Speed Transistor Optocouplers Ordering Information HCPL0XXX -- High Speed Transistor Optocouplers Carrier Tape Specifications 8.0 0.10 3.50 0.20 2.0 0.05 0.30 MAX O1.5 MIN 4.0 0.10 1.75 0.10 5.5 0.05 12.0 0.3 8.3 0.10 5.20 0.20 0.1 MAX O1.5 0.1/-0 6.40 0.20 User Direction of Feed (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 www.fairchildsemi.com 10 HCPL0XXX -- High Speed Transistor Optocouplers Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 8 minutes max. www.fairchildsemi.com 11 Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM* TM* (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) (R) FAST FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PDP SPMTM Power-SPMTM PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM Sync-LockTM (R) * The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 (c)2003 Fairchild Semiconductor Corporation HCPL0XXX Rev. 1.0.4 www.fairchildsemi.com 12 HCPL0XXX -- High Speed Transistor Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.