G3R-OA202SZN-UTU-DC5-24 - Omron

Solid State Relay G3R-I/O 431

Solid State Relay

G3R-I/O

Compact SSRs for I/O Interface with High

Dielectric Strength Requirements

• High-speed models with optimum input ratings for a variety

of sensors are available.

• Input Modules and Output Modules that have the same

form-factor as the G2R.

• Using a coupler approved by VDE 0884 and assuring an

I/O dielectric strength of 4 kV.

• Incorporating an easy-to-see monitoring indicator.

• Approved by UL, CSA, and TÜV. (“-UTU” models)

Ordering Information

To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)

■Input Module

■Output Module

Note: When ordering a UL, CSA and EN (TÜV) approved model, add “-UTU” to the model number as shown below:

Example: G3R-OA202SZN-UTU DC5-24.

■I/O Indication

I/O module classification and AC/DC use are indicated on the mark

affixed to the top of the product.

Isolation Indicator Response speed Logic level Rated input

voltage

Model

Supply voltage Supply current

Photocoupler Yes — 4 to 32 VDC 0.1 to 100 mA 100 to 240 VAC G3R-IAZR1SN

High-speed

(1 kHz)

5 VDC G3R-IDZR1SN

12 to 24 VDC

Low-speed

(10 Hz)

5 VDC G3R-IDZR1SN-1

12 to 24 VDC

Isolation Indicator Zero cross

function

Rated output

load

Rated input

voltage

Model

Phototriac Yes Yes 2 A at 100 to 240 VAC 5 to 24 VDC G3R-OA202SZN

No G3R-OA202SLN

Photocoupler — 2 A at 5 to 48 VDC G3R-ODX02SN

1.5 A at 48 to 200 VDC G3R-OD201SN

Mark indication Specification

AC IN Input module, AC input

DC IN Input module, DC input

AC OUT Output module, AC output

DC OUT Output module, DC output

Mark attached to the top of the product

432 Solid State Relay G3R-I/O

Specifications

■Ratings (at an Ambient Temperature of 25°C)

Input Module

Input

Output

Output Module

Input

Output

Note: The minimum current value is measured at 10°C min.

Model Rated voltage Operating voltage Input current Must operate

voltage

Must release

voltage

G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min.

G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min.

12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.

G3R-IDZR1SN-1 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min.

12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.

Model Logic level supply voltage Logic level supply current

G3R-IAZR1SN 4 to 32 VDC 0.1 to 100 mA

G3R-IDZR1SN

G3R-IDZR1SN-1

Model Rated voltage Operating voltage Input current Must operate

voltage

Must release

voltage

G3R-OA202SZN 5 to 24 VDC 4 to 32 VDC 15 mA max.

(at 25°C)

4 VDC max. 1 VDC min.

G3R-OA202SLN

G3R-ODX02SN 8 mA max.

G3R-OD201SN

Model Rated load voltage Load voltage range Load current (see note) Inrush current

G3R-OA202SZN 100 to 240 VAC 75 to 264 VAC 0.05 to 2 A 30 A (60 Hz, 1 cycle)

G3R-OA202SLN

G3R-ODX02SN 5 to 48 VDC 4 to 60 VDC 0.01 to 2 A 8 A (10 ms)

G3R-OD201SN 48 to 200 VDC 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms)

Solid State Relay G3R-I/O 433

Characteristics

■Input Module

■Output Module

Item G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1

Operate time 20 ms max. 0.1 ms max. 15 ms max.

Release time 20 ms max. 0.1 ms max. 15 ms max.

Response frequency 10 Hz 1 kHz 10 Hz

Output ON voltage drop 1.6 V max.

Leakage current 5 μA max.

Insulation resistance 100 MΩmin. between input and output

Dielectric strength 4,000 VAC, 50/60 Hz for 1 min. between input and output

Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance 1,000 m/s2 {approx. 100G}

Ambient temperature Operating: -30°C to 80°C (with no icing)

Storage: -30°C to 100°C (with no icing)

Approved standards UL File No. E64562

CSA File No. LR35535

TÜV File No. R9650094 (EN60950)

Ambient humidity Operating: 45% to 85%

Weight Approx. 18 g

Item G3R-OA202SZN G3R-OA202SLN G3R-ODX02SN G3R-OA201SN

Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max.

Release time 1/2 of load power source cycle + 1 ms max. 2 ms max.

Response frequency 20 Hz 100 Hz

Output ON voltage drop 1.6 V max. 2.5 V max.

Leakage current 1.5 mA max. 1 mA max.

Insulation resistance 100 MΩmin. between input and output

Dielectric strength 4,000 VAC, 50/60 Hz for 1 min. between input and output

Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance 1,000 m/s2 {approx. 100G}

Ambient temperature Operating: -30°C to 80°C (with no icing)

Storage: -30°C to 100°C (with no icing)

Approved standards UL File No. E64562

CSA File No. LR35535

TÜV File No. R9650094 (EN60950)

Ambient humidity Operating: 45% to 85%

Weight Approx. 18 g

434 Solid State Relay G3R-I/O

Engineering Data

Load Current vs. Ambient Temperature

Inrush Current Resistivity

Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)

1.5

−30

0.7

0.5

−20 0 20 30 40 55 60 80 100

1.4

−30 −20 0 20 40 55 60 80 100

1.5

0.5

0.6

1.1

1.5

0.5

−30 −20 0 20 40 55 60 80 100

1.4

4-point mounting (see note 1)

16-point mounting (see note 2) 4-point mounting (see note 1)

4-point mounting (see note 1)

16-point mounting (see note 2)

G3R-OA202SZN(-UTU)/OA202SLN(-UTU) G3R-OD201SN(-UTU) (40 to 200 VAC)G3R-ODX02SN(-UTU) (4 to 60 VDC)

Ambient temperature (

Load current (A)

Ambient temperature (

Load current (A)

Ambient temperature (

Load current (A)

Note: 1. When G730-Z0M04-B is mounted.

2. When G70A-Z0C16 is mounted.

Single-point

mounting Single-point

mounting

16-point mounting

(see note 2)

Single-point

mounting

10 30 50 100 200 500 1000 5000

010 30 50 100 500 1000 2000300

G3R-OA202SZN(-UTU)/OA202SLN(-UTU) G3R-OD201SN(-UTU)G3R-ODX02SN(-UTU)

Inrush current (A)

Energized time (ms)

Inrush current (A)

Energized time (ms)

Inrush current (A)

Energized time (ms)

Solid State Relay G3R-I/O 435

Dimensions

Unit: mm (inch)

■G3R

■Connecting Sockets

57.5

9.6

0.5

5.2

17.4

4.7

4.75

0.5

(+)

(−)

1 5

(−) (+)

13 max. 28 max.

29 max.

Load

Input

Terminal Arrangement/

Internal Connections

(Bottom View)

58.5 *

Five, M3.5×8

P2RF-05

71.5 max.

19.5 max.

54 max.

30 max.

4 dia.

4.2-dia. hole

P2RF-05 Socket

G3R I/O Relay

M3 (M3 x16) or

3.2-dia. hole

* Indicates a value when using the PFP-@N

Supporting Rail.

The value is 67.5 when using the PFP-@N2.

62.5 **

(66.5)***

P2RF-05-E

G3R I/O Relay

3.2-dia. hole

M3 or 3.5-dia. hole

59 max.

48 max.

M3.5 screw

85.5 max.

61 max.

3.5-dia.

hole

PFRF-05-E

Socket

** Indicates a value when using the PFP-@N

Supporting Rail with the P2RF-05-E

The value is 71.5 when using the PFP-@N2.

*** Indicates a value when using the PFP-@N

Supporting Rail with the P2RF-08-E

The value is 75.5 when using the PFP-@N2.

P2R-05A 14.5 max.

35.5 max.

Five, 3x1.5-dia. hole

G3R I/O Relay

P2R-05A Socket

36 max.

(Panel thickness must

be 1.6 to 2.0 mm.) (For use when mounting in a panel or in

the P2R-P mounting plate )

436 Solid State Relay G3R-I/O

■Socket Mounting Plate

Use the P2R-P Socket Mounting Plate when arranging several P2R-05A Sockets in a row.

P2R-P

■Approvals

UL Recognized (File No. E64562) / CSA Certified (File No. LR35535)

P2R-05P

Dimensional tolerance is ±0.1.

G3R I/O Relay

P2R-05P Socket

Five, 1.6-dia. hole

35.5 max.

14.5 max.

36 max.

P2R-057P G3R I/O Relay

P2R-057P Socket

Five, 1.6-dia. hole

14 max.

32 max.

41 max.

Square hole

R2.25

10 ellipses

Model G3R- Module type Rating

IAZR1SN Input 100 to 240 VAC

IDZR1SN Input 5 VDC, 12 to 24 VDC

IDZR1SN-1 Input 5 VDC, 12 to 24 VDC

OA202SZN Output 5 to 24 VDC

OA202SLN Output 5 to 24 VDC

ODX02SN Output 5 to 24 VDC

OD201SN Output 5 to 24 VDC

Model G3R- Module type Output rating

IAZR1SN Input 32 VDC, 100 mA (General Purpose)

IDZR1SN Input 32 VDC, 100 mA (General Purpose)

IDZR1SN-1 Input 32 VDC, 100 mA (General Purpose)

OA202SZN Output 264 VAC, 2 A (General Purpose)

264 VAC, 1 A (Tungsten)

264 VAC, 1 A FLA, 6 A LRA

OA202SLN Output 264 VAC, 2 A (General Purpose)

264 VAC, 1 A (Tungsten)

264 VAC, 1 A FLA, 6 A LRA

ODX02SN Output 60 VDC, 2 A (General Purpose)

60 VDC, 1 A (Tungsten)

OD201SN Output 200 VDC, 1.5 A (General Purpose)

200 VDC, 0.75 A (Tungsten)

Solid State Relay G3R-I/O 437

Precautions

■Connection

With the SSR for DC switching, the load can be connected to either

positive or negative output terminal of the SSR.

■Protective element

Since the SSR does not incorporate an overvoltage absorption com-

ponent, be sure to connect an overvoltage absorption component

when using the SSR under an inductive load.

■Precaution of Mounting Output Modules

G3R G3R G3R

With up to four G3R SSRs mounted closely and

side by side, 2-A loads can be switched.

With a G3R SSRs mounted every other slot,

2-A loads can be switched.

Solid State Relay G3R-I/O

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.components.omron.com

Cat. No. X301-E-1b Printed in USA

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

09/11 Specifications subject to change without notice

All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which

can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.