DP8310,DP8311
DP8310/DP8311 Octal Latched Peripheral Drivers
Literature Number: SNOSBE4
DP8310/DP8311
Octal Latched Peripheral Drivers
General Description
The DP8310 and DP8311 Octal Latched Peripheral Drivers
provide the function of latching eight bits of data with open
collector outputs, each driving up to 100 mA DC with an op-
erating voltage range of 30V. Both devices are designed for
low input currents, high input/output voltages, and feature a
power up clear (outputs off) function.
The DP8310 is positive edge latching. Two active low write/
enable inputs are available for convenient data bussing with-
out external gating.
The DP8311 is positive edge latching. The active low strobe
input latches data or allows fall through operation when held
at logic “0”. The latches are cleared (outputs off) with a logic
“0” on the clear pin.
Features
nHigh current, high voltage open collector outputs
nLow current, high voltage inputs
nAll outputs simultaneously sink rated current “DC” with
no thermal derating at maximum rated temperature
nParallel latching or buffering
nSeparate active low enables for easy data bussing
nInternal “glitch free” power up clear
n10%V
CC
tolerance
Applications
nHigh current high voltage drivers
nRelay drivers
nLamp drivers
nLED drivers
nTRIAC drivers
nSolenoid drivers
nStepper motor drivers
nLevel translators
nFiber-optic LED drivers
Connection Diagrams
Dual-In-Line Package
DS005246-1
Top View
Dual-In-Line Package
DS005246-2
Top View
Order Number DP8310N or DP8311N
See NS Package Number N20A
February 2000
DP8310/DP8311 Octal Latched Peripheral Drivers
© 2000 National Semiconductor Corporation DS005246 www.national.com
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage 7.0V
Input Voltage 35V
Output Voltage 35V
Maximum Power Dissipation*at T
A
=25˚C
DP8310/DP8311 2005 mW
Storage Temperature Range −65˚C to +150˚C
Lead Temperature (Soldering, 4 sec.) 260˚C
Note: *Derate N20A package 15.4 mW/˚C above TA=25˚C, θJA=65˚C/W.
Operating Conditions
Min Max Units
Supply Voltage (V
CC
) 4.5 5.5 V
Temperature
DP8310/DP8311 0 +70 ˚C
Input Voltage 30 V
Output Voltage 30 V
DC Electrical Characteristics
DP8310 and DP8311 (Notes 2, 3)
Symbol Parameter Conditions Min Typ Max Units
V
IH
Logical “1” Input Voltage 2.0 V
V
IL
Logical “0” Input Voltage 0.8 V
V
OL
Logical “0” Output Voltage Data outputs latched to
logical “0”, V
CC
=Min.
DP8310/DP8311 I
OL
=100 mA 0.35 0.5 V
I
OH
Logical “1” Output Current Data outputs latched to
logical “1”, V
CC
=Min.
DP8310/DP8311 V
OH
=30V 2.5 250 µA
I
IH
Logical “1” Input Current V
IH
=2.7V, V
CC
=Max 0.1 25 µA
I
I
Input Current at Maximum Input
Voltage V
IN
=30V, V
CC
=Max 1 250 µA
I
IL
Logical “0” Input Current V
IN
=0.4V, V
CC
=Max −215 −300 µA
V
clamp
Input Clamp Voltage I
IN
=12 mA −0.8 −1.5 V
I
CC0
Supply Current, Outputs On Data outputs latched to a
logical “0”. All Inputs are
at logical “1”, V
CC
=Max.
DP8310 100 152 mA
DP8311 88 125 mA
I
CC1
Supply Current, Outputs Off Data outputs latched to a
logic “1”. Other
conditions same as I
CC0
.
DP8310 40 57 mA
DP8311 25 36 mA
AC Electrical Characteristics
DP8310 only: V
CC
=4.5V, T
A
=25˚C
Symbol Parameter Conditions Min Typ Max Units
t
pd0
High to Low Propagation Delay
Write Enable Input to Output
(Figure 1 )
40 120 ns
t
pd1
Low to High Propagation Delay
Write Enable Input to Output
(Figure 1 )
70 150 ns
t
SETUP
Minimum Set-Up Time
Data in to Write Enable Input t
HOLD
=0ns
(Figure 1)
45 20 ns
t
pWH
,t
pWL
Minimum Write Enable Pulse Width
(Figure 1 )
60 25 ns
t
THL
High to Low Output Transition Time
(Figure 1 )
16 35 ns
t
TLH
Low to High Output Transition Time
(Figure 1 )
38 70 ns
C
IN
“N” Package (Note 4) 5 15 pF
DP8310/DP8311
www.national.com 2
AC Electrical Characteristics
DP8311 only: V
CC
=5V, T
A
=25˚C
Symbol Parameter Conditions Min Typ Max Units
t
pd0
High to Low Propagation Delay
Data In to Output
(Figure 2 )
30 60 ns
t
pd1
Low to High Propagation Delay
Data to Output
(Figure 2)
70 100 ns
t
SETUP
Minimum Set-Up Time
Data in to Strobe Input t
HOLD
=0ns
(Figure 2 )
0 −25 ns
t
pWL
Minimum Strobe Enable Pulse Width
(Figure 2 )
60 35 ns
t
pdC
Propagation Delay Clear to Data Output
(Figure 2 )
70 135 ns
t
pWC
Minimum Clear Input Pulse Width
(Figure 2 )
60 25 ns
t
THL
High to Low Output Transition Time
(Figure 2 )
20 35 ns
t
TLH
Low to High Output Transition Time
(Figure 2 )
38 60 ns
C
IN
Input Capacitance—Any Input (Note 4) 5 15 pF
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they
are not meant to imply that the devices should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device operation.
Note 2: Unless otherwise specified min/max limits apply across the 0˚C to +70˚C for the DP8310/DP8311. All typical values are for TA=25˚C, VCC =5V.
Note 3: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted.
Note 4: Input capacitance is guaranteed by periodic testing. fTEST =10 kHz at 300 mV, TA=25˚C.
DP8310/DP8311
www.national.com3
Logic Table
DP8310
Write
Enable 1
WE
1
Write
Enable 2
WE
2
Data
Input
DI
1–8
Data
Output
DO
1–8
00XQ
0
O
01
0O10
O001
O010
01XQ
10XQ
11XQ
DP8311
Clear
CLR Strobe
STR
Data
Input
DI
1–8
Data
Output
DO
1–8
11XQ
1001
1010
0XX1
X
=
Don’t Care
1=Outputs Off
0=Outputs On
Q=Pre-existing Output
O=Positive Edge Transition
Block Diagrams
DP8310
DS005246-3
DP8311
DS005246-4
DP8310/DP8311
www.national.com 4
Switching Time Waveforms
Switching Time Test Circuits
DP8310
DS005246-5
DP8311
DS005246-6
DS005246-7
*WE1=0V When the Input =WE2
FIGURE 1. DP8310
DS005246-8
Pulse Generator Characteristics:
ZO=50Ω,t
r=t
f=5ns
FIGURE 2. DP8311
DP8310/DP8311
www.national.com5
Typical Applications DP8310/11 Buffering High Current Device (Notes 5, 6)
PNP High Current Driver
DS005246-9
NPN High Current Driver
DS005246-10
VMOS High Current Driver
DS005246-11
Circuit Used to Reduce Peak
Transient Lamp Current
DS005246-12
DP8310/DP8311
www.national.com 6
Typical Applications DP8310/11 Buffering High Current Device (Notes 5, 6) (Continued)
Eight Output/Four Output Fiber Optic LED Driver
DP8311 100 mA Drivers
DS005246-13
DP8311 Parallel Outputs (200 mA) Drivers*
DS005246-14
*Parallel only adjacent outputs
8-Bit Level Translator Driver
DS005246-15
Digital Controlled 256 Level
Power Supply from 1.2V to 30V
DS005246-16
DP8310/DP8311
www.national.com7
Typical Applications DP8310/11 Buffering High Current Device (Notes 5, 6) (Continued)
200 mA Drive for a 4 Phase Bifilar Stepper Motor
DS005246-17
*Parallel only adjacent outputs
Reading the State of the Latched Peripherals
DS005246-18
*High Level Input
Voltage must not
Exceed VCC of the
DM81LS96
Note 5: Always use good VCC bypass and ground techniques to suppress transients caused by peripheral loads.
Note 6: Printed circuit board mounting is required if these devices are operated at maximum rated temperature and current (all outputs on DC).
DP8310/DP8311
www.national.com 8
Physical Dimensions inches (millimeters) unless otherwise noted
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
National Semiconductor
Europe Fax: +49 (0) 180-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: ap.support@nsc.com
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
www.national.com
Molded Dual-In-Line Package (N)
Order Number DP8310N or DP8311N
NS Package Number N20A
DP8310/DP8311 Octal Latched Peripheral Drivers
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Communications and Telecom www.ti.com/communications
Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers
Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps
DLP®Products www.dlp.com Energy and Lighting www.ti.com/energy
DSP dsp.ti.com Industrial www.ti.com/industrial
Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical
Interface interface.ti.com Security www.ti.com/security
Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright ©2011, Texas Instruments Incorporated
