FGG.0T.309.CLAC50Z - LEMO - Datasheet.Live

T SERIES

IP 68 PUSH-PULL CONNECTORS

www.lemo.com

®

Technical Characteristics

1

37

2

462 5 4 1 6 9

5

63 7 8 10

Fixed socket

outer shell

earthing crown

hexagonal nut

insulator

female contact

o-ring

locking washer

4

3

6

5

1

2

7

Straight plug

outer shell

latch sleeve

inner shell

insulator

male contact

split insert carrier

earthing cone

gasket

collet

collet nut

4

3

6

5

1

2

7

8

9

10

Part Section Showing Internal Components

Mechanical and Climatical Value Standard

Endurance > 1000 cycles1) IEC 60512-5 test 9a

Humidity up to 95% at 60°C –

Temperature range -55°C, +200°C / (-20°C, +80°C) 2) –

Resistance to vibration 10-2000 Hz, 15 g IEC 60512-4 test 6d

Shock resistance 100 g, 6 ms IEC 60512-4 test 6c

Salt spray corrosion test > 1000 h IEC 60512-6 test 11f

Protection index (mated) IP68 3) IEC 60529

Latching retention force > 100 N –

Shielding efficiency at 10 MHz > 75 dB IEC 60169-1-3

Shielding efficiency at 1 GHz > 40 dB IEC 60169-1-3

Outershell and collet nut Latch sleeve/earthing crown Other metallic components

Material Surface treatment Material Surface treatment Material Surface treatment

Brass Chrome Brass/Bronze Nickel Brass Nickel

Brass Black chrome Brass/Bronze Nickel Brass Nickel

POM – Brass/Bronze Nickel Brass Nickel

Material and Treatments

Insulators

Material Contact type

Brass (UNS C 34500) Male contact

Bronze (UNS C 54400) Female contact

Material Contact type

PEEK Crimp, solder or print

Contacts

T series connectors have been specifically designed for outdoor applications. They include an inner sleeve and seals to pre-

vent penetration of solids or liquids.This series is watertight when mated to give a protection index of IP68 as per IEC 60529

standard and have the following main features:

- IP68 mated - Compatible with existing B sockets

- Push-Pull self-latching system - Same mounting hole as B sockets

- Mechanical key (FGG) with multiple keys - Black-chrome plated brass and plastic outershell available

to avoid cross-mating - Multipole types 2 to 32 contacts

- High packing density for space savings - For cables 1.0 up to 10.5 mm

- 360° shielding for full EMC shielding - Solder, crimp or print contacts

T series

Electrical Value Standard

Note: 1) Up to 5000 cycles for size 3T. 2) operating temperature is -20°C, +80°C for watertight or vacuumtight models fitted with an FPM (Viton®) o-ring

and Epoxy. 3) IP68 achieved providing that the cable is perfectly circular and that assembly process ensures a high integrity seal.

1www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

FGG

PHG

EGG

EEG

HGG HEG

FFG

FGG EGG HMG

Straight plugs Fixed sockets Free sockets

Chrome-plated housing models

Straight plug Fixed socket

Plastic housing models

Insert configuration

Series

Model

Alignment key

Fixed socket

Insulator: PEEK

L = for solder contact

Y = for crimp contact

Insulator: PEEK

L = for solder contact

Y = for crimp contact

E G G 1T 3 0 6 C L L

.. .

EGG.1T.306.CLL = fixed socket, nut fixing, with key (G), 1T series, multipole type with 6 contacts, outer shell in chrome-plated brass,

PEEK insulator, female solder contacts.

Z

F G G 1T

Insert configuration

Cable ø

Collet type

Housing:

C = Chrome plated brass

K = Black Chrome plated brass

B = POM

Variant

3 0 6

Series

Model

Alignment key

C L A C 4 0

Contact:

A = male solder

L = female solder

C = male crimp

M = female crimp

Plug and free socket

Variant

.. .

FGG.1T.306.CLAC40Z = Straight plug with key (G) and cable collet for bend relief, 1T series, multipole type with 6 contacts, outer shell

in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 4.0 mm diameter cable and nut for fitting a bend relief.

Interconnections

Part Numbering System

Contact:

L = female solder

M = female crimp

N = female print

V = female elbow print

Housing:

C = Chrome plated brass

K = Black Chrome plated brass

B = POM

Fixed sockets

Watertight or vacuumtight models

2 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

Chrome-plated housing models

7.0 33.2 25.2

9.5 39.0 29.0

12.0 46.0 35.0

15.0 55.0 43.0

18.8 64.0 49.0

Dimensions (mm)

A L M

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

~M

~L

ø A

~M

~L

ø A

~M

~L

ø A

FGG Straight plug, cable collet

7.0 32.7 24.7

9.5 38.0 28.0

12.0 45.0 34.0

15.0 54.0 42.0

18.8 62.0 47.0

Dimensions (mm)

A L M

FGG TT

FGG 0T

FGG 1T

FGG 2T

FGG 3T

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

FGG Straight plug, cable collet and nut for fitting a bend relief

FFG Straight plug, non latching, cable collet

FGG TT

FGG 0T

FGG 1T

FGG 2T

FGG 3T

7.0 33.2 25.2

9.5 39.0 29.0

12.0 46.0 35.0

15.0 55.0 43.0

18.8 64.0 49.0

Dimensions (mm)

A L M

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

FFG TT

FFG 0T

FFG 1T

FFG 2T

FFG 3T

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

3

E maxi

N

L maxi

M

ø A

e

B + 0.1

0

ø C + 0.1

0

EGG Fixed socket, nut fixing

EGG TT

EGG 0T

EGG 1T

EGG 2T

EGG 3T

Reference

Model Series

Panel cut-out

6.4 7.1

8.3 9.1

10.6 12.1

13.6 15.1

16.6 18.1

Panel cut-out

B C

10.0 M7x0.5 5.5 16.0 1.2 13.5

12.0 M9x0.6 6.0 21.0 1.5 19.1

15.5 M12x1.0 6.0 23.0 1.8 21.5

18.5 M15x1.0 7.5 26.5 1.8 24.6

23.5 M18x1.0 9.6 30.1 2.5 25.0

Dimensions (mm)

A e E L M N1)

B + 0.1

0

ø C + 0.1

0

ø A

L maxi

E maxi

N

e

EEG Fixed socket, nut fixing, back panel mounting

Panel cut-out

~L

ø A

7.0 32.0

9.5 38.0

12.0 43.5

15.0 52.0

18.8 61.5

Dim. (mm)

A L

PHG TT

PHG 0T

PHG 1T

PHG 2T

PHG 3T

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

7.0 31.5

9.5 37.0

12.0 42.5

15.0 51.0

18.8 60.0

Dim. (mm)

A L

PHG TT

PHG 0T

PHG 1T

PHG 2T

PHG 3T

Reference

Model Series

2.4 3.0

1.0 5.0

1.3 6.5

1.3 8.5

2.6 10.5

Cable ø

min. max.

PHG Free socket, cable collet

~L

ø A

PHG Free socket, cable collet and nut for fitting a bend relief

EEG TT

EEG 0T

EEG 1T

EEG 2T

EEG 3T

Reference

Model Series

6.4 7.1

8.3 9.1

10.6 12.1

13.6 15.1

16.6 18.1

Panel cut-out

B C

10.0 M7x0.5 4.5 16.0 13.5

12.0 M9x0.6 6.5 21.0 19.1

15.5 M12x1.0 6.5 23.0 21.5

18.5 M15x1.0 7.5 26.5 24.6

23.5 M18x1.0 7.5 30.1 25.0

Dimensions (mm)

A e E L N1)

Note: 1) maximum length with crimp contacts.

4 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

Watertight or vacuumtight models

B + 0.1

0

ø C + 0.1

0

B + 0.1

0

ø C + 0.1

0

B + 0.1

0

ø C + 0.1

0

Note: temperature range -20°C / +80°C

ø A

L maxi

E maxi

N

e

ø A

L maxi

E maxi

N

e

L maxi

N

ø A

E maxi

M

e

HGG Fixed socket, nut fixing, watertight or vacuumtight

Panel cut-out

Note: temperature range -20°C / +80°C

HEG Fixed socket, nut fixing, watertight or vacuumtight, back panel mounting

Panel cut-out

Note: temperature range -20°C / +80°C

HMG Fixed socket, nut fixing, watertight or vacuumtight, back panel mounting

Panel cut-out

HMG 0T

HMG 1T

HMG 2T

Reference

Model Series

HEG 0T

HEG 1T

HEG 2T

Reference

Model Series

HGG 0T

HGG 1T

HGG 2T

Reference

Model Series

8.3 9.1

10.6 12.1

13.6 15.1

Panel cut-out

B C

12.0 M9x0.6 6.5 22.0 1.5 18.5

15.5 M12x1.0 6.0 26.0 1.8 21.5

18.5 M15x1.0 8.0 30.5 2.0 25.0

Dimensions (mm)

A e E L M N

8.3 9.1

10.6 12.1

13.6 15.1

Panel cut-out

B C

12.0 M9x0.6 6.5 22.0 18.5

15.5 M12x1.0 6.5 26.0 21.5

18.5 M15x1.0 7.5 30.5 25.0

Dimensions (mm)

A e E L N

8.3 9.1

10.6 12.1

13.6 15.1

Panel cut-out

B C

12.0 M9x0.6 6.5 22.0 18.5

15.5 M12x1.0 6.5 26.0 21.5

18.5 M15x1.0 7.5 30.5 25.0

Dimensions (mm)

A e E L N

HGG.0T.305.CLLP (5 contacts, resin potted)

HGG.0T.305.CLLPV (5 contacts, resin potted and vacuumtight)

These models are identified by a letter «P» at the end of the reference.

Most of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V»

at the end of the part number (certificate on request). Epoxy resin is used to seal these models.

Part Number Example

5www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

Plastic housing models

~L

ø A

~M

9.7 38.5 28.5

13.0 45.0 34.0

Dimensions (mm)

A L M

FGG 0T

FGG 1T

Reference

Model Series

1.0 5.0

1.3 6.5

Cable ø

min. max.

FGG Straight plug, cable collet and nut for fitting a bend relief, POM outer shell

EGG Fixed socket, nut fixing, POM outer shell

E maxi

N

L maxi

M

ø A

e

B + 0.1

0

ø C + 0.1

0

Panel cut-out

Alignment Key

Key

G

AL

D

Contact type

Plug Socket

male female

female male

G

A

D

L

EGG 0T

EGG 1T

Reference

Model Series

8.3 9.1

10.6 12.1

Panel cut-out

B C

12.0 M9x0.6 6 21.0 1.5 19.1

15.5 M12x1.0 6 22.2 1.8 18.5

Dimensions (mm)

A e E L M N1)

Note: 1) maximum length with crimp contacts.

6 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

TT 0.5 ● ●

30 32 28

0T 0.9 ● ● ● ●

22 32 20

1T 1.3 ● ● ● ●

20 26 18

2T 2.0 ● ● ● ●

16 18 12

3T 3.0 ● ●

12 14 10

Insert configurations

302

303

304

305

306

1.00 0.95 5.0

1.00 1.05 10.0

1.50 1.35 15.0

2.10 1.75 25.0

2.10 1.55 35.0

TT 0.5 ● ●

30 32 28

0T 0.9 ● ● ● ●

22 32 20

1T 1.3 ● ● ● ●

20 26 18

2T 1.6 ● ● ● ●

18 22 14

3T 2.0 ● ● ●

16 18 12

0.80 0.95 3.0

1.20 0.90 8.0

1.30 1.55 12.0

2.40 1.85 17.0

1.90 1.50 25.0

TT 0.5 ● ●

30 32 28

0T 0.7 ● ● ● ●

22 32 22

1T 0.9 ● ● ● ●

22 32 20

2T 1.3 ● ● ● ●

20 26 18

3T 2.0 ● ● ● ●

16 18 12

0.80 0.65 2.0

0.85 0.70 7.0

1.35 1.45 10.0

1.85 1.85 15.0

1.45 1.25 19.0

0T 0.7 ● ● ● ●

22 32 22

1T 0.9 ● ● ● ●

22 32 20

2T 1.3 ● ● ● ●

20 26 18

3T 1.6 ● ● ●

18 22 14

1.00 0.70 6.5

1.25 1.15 9.0

1.75 1.60 14.0

1.90 1.25 19.0

0T 0.5 ●

●

1) ● ●

28

1T 0.7 ● ● ● ●

22 32 22

0.85 0.65 2.5

1.05 1.20 7.0

2

3

4

6

5

Multipole

Reference

Solder contacts

Crimp contacts

Series

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type AWG

Crimp

Test voltage (kV rms)

Test voltage (kV dc)

Rated current (A)

306

6

2T 1.3 ● ● ● ●

20 26 18

3T 1.6 ● ● ● ●

18 22 14

1.35 1.45 12.0

1.60 1.15 17.0

Note: 1) available only for connectors fitted with male contacts.

7www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

307

308

309

310

7

8

9

10

Multipole

Reference

Solder contacts

Crimp contacts

Series

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type AWG

Crimp

Test voltage (kV rms)

Test voltage (kV dc)

Rated current (A)

0T 0.5 ●

●

1) ● ●

28

1T 0.7 ● ● ● ●

22 32 22

2T 1.3 ● ● ● ●

20 26 18

3T 1.6 ● ● ●

18 22 14

0.80 0.70 2.5

0.95 1.05 7.0

1.75 1.60 11.0

1.70 1.25 15.0

1T 0.5 ●

●

1) ● ●

28

2T 0.9 ● ● ● ●

22 32 20

3T 1.3 ● ● ● ●

20 26 18

0.90 1.50 2.5

1.45 1.30 8.0

1.25 0.90 12.0

1T 0.7 ● ● ● ●

22 32 22 0.95 1.15 5.0

2T 0.9 ● ● ● ●

22 32 20

3T 1.3 ● ● ● ●

20 26 18

1.50 1.25 10.0

1.65 1.15 13.0

0T 0.5 ●

●

1) ● ●

28

3T ● ● ●

0.60 0.50 2.0

1.35 1.05

8x1.3

20 26 18

1x2.0 16 18 12

6.0

15.0

312

12

312

12

0T 0.35 ●

28 0.80 1.00 1.5

2T 0.7 ● ● ● ●

22 32 22

3T 0.9 ● ● ● ●

22 32 20

1.25 1.35 7.0

1.45 1.00 9.0

Note: 1) available only for connectors fitted with male contacts.

8 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

314

316

14

16

316

16

318

18

Multipole

Reference

Solder contacts

Crimp contacts

Series

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type AWG

Crimp

Test voltage (kV rms)

Test voltage (kV dc)

Rated current (A)

1T 0.5 ● ●

28 0.80 1.25 1.5

2T 0.7 ● ● ● ●

22 32 22

3T 0.9 ● ● ● ●

22 32 20

0.95 1.25 6.0

1.20 0.85 8.0

2T 0.7 ● ● ● ●

22 32 22

3T 0.9 ● ● ● ●

22 32 20

0.85 1.20 5.5

1.20 1.05 7.0

1T 0.5 ● ● ●

28

2T 0.7 ● ● ● ●

22 32 22

3T 0.9 ● ● ● ●

22 32 20

0.80 1.20 2.0

1.15 1.35 6.5

1.20 1.20 9.0

320

20

319

19

2T 0.7 ● ● ● ●

22 32 22 0.95 1.25 5.0

3T 0.7 ● ● ● ●

22 32 22 1.00 0.90 6.0

322

22

3T 0.7 ● ● ●

22 32 22 1.00 0.90 5.5

9www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

324

326

24

26

3T 0.7 ● ● ● ●

22 32 22 0.80 0.70 3.5

3T 0.7 ● ● ● ●

22 32 22 0.95 0.80 4.0

Multipole

Reference

Solder contacts

Crimp contacts

Series

Contact ø (mm)

Solder

Crimp

Print (straight)

Print (elbow)

Solder (max.)

min.

max.

Contact

type AWG

Crimp

Test voltage (kV rms)

Test voltage (kV dc)

Rated current (A)

2T 0.5 ● ●

28

3T 0.7 ● ● ●

22 32 22

0.95 1.30 2.0

0.95 0.70 4.0

330

30

332

32

2T 0.5 ● ●

28 0.80 1.20 1.5

10 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

1.0 1.2

1.3 1.5

1.6 2.0

2.1 2.5

2.6 3.0

3.1 3.5

3.6 4.0

4.1 4.5

4.6 5.0

C10

C15

C20

C25

C30

C35

C40

C45

C50

Cable ø (mm)

min. max.

Type

Collets

0T

TT

Cable ø (mm)

min. max.

Type

Cable ø (mm)

min. max.

Type

Cable ø (mm)

min. max.

Type

2.6 3.0

3.1 3.5

3.6 4.0

4.1 4.5

4.6 5.0

5.1 5.5

5.6 6.0

6.1 6.5

6.6 7.0

7.1 7.5

7.6 8.0

8.1 8.5

8.6 9.0

9.1 9.5

9.6 10.0

10.1 10.5

C30

C35

C40

C45

C50

C55

C60

C65

C70

C75

C80

C85

C90

C95

C10

C11

3T

1.3 1.5

1.6 2.0

2.1 2.5

2.6 3.0

3.1 3.5

3.6 4.0

4.1 4.5

4.6 5.0

5.1 5.5

5.6 6.0

6.1 6.5

C15

C20

C25

C30

C35

C40

C45

C50

C55

C60

C65

1T 1.3 1.5

1.6 2.0

2.1 2.5

2.6 3.0

3.1 3.5

3.6 4.0

4.1 4.5

4.6 5.0

5.1 5.5

5.6 6.0

6.1 6.5

6.6 7.0

7.1 7.5

7.6 8.0

8.1 8.5

C15

C20

C25

C30

C35

C40

C45

C50

C55

C60

C65

C70

C75

C80

C85

2T

2.4 2.6

2.7 3.0

C27

C31

11www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

Spare parts

male female

Note: each insulator can be used both for crimp contacts of normal shape

(fig. 1) or with reduced solder cups (fig. 2) as shown on page 12.

FGG-EGG Insulators for crimp contacts

Insulator part number

Male contact Female contact

Type

Insulator part number

Male contact Female contact

Type

TT

FGG.00.302.YL EGG.00.402.YL

FGG.00.303.YL EGG.00.403.YL

FGG.00.304.YL EGG.00.404.YL

302

303

304

0T

FGG.0B.302.YL EGG.0B.402.YL

FGG.0B.303.YL EGG.0B.403.YL

FGG.0B.304.YL EGG.0B.404.YL

FGG.0B.305.YL EGG.0B.405.YL

FGG.0B.306.YL –

FGG.0B.307.YL –

FGG.0B.309.YL –

302

303

304

305

306

307

309

1T

FGG.1B.302.YL EGG.1B.402.YL

FGG.1B.303.YL EGG.1B.403.YL

FGG.1B.304.YL EGG.1B.404.YL

FGG.1B.305.YL EGG.1B.405.YL

FGG.1B.306.YL EGG.1B.406.YL

FGG.1B.307.YL EGG.1B.407.YL

FGG.1B.308.YL EGG.1B.408.YL

FGG.1B.310.YL –

FGG.1B.314.YL –

FGG.1B.316.YL –

302

303

304

305

306

307

308

310

314

316

2T

FGG.2B.302.YL EGG.2B.402.YL

FGG.2B.303.YL EGG.2B.403.YL

FGG.2B.304.YL EGG.2B.404.YL

FGG.2B.305.YL EGG.2B.405.YL

FGG.2B.306.YL EGG.2B.406.YL

FGG.2B.307.YL EGG.2B.407.YL

FGG.2B.308.YL EGG.2B.408.YL

302

303

304

305

306

307

308

3T

FGG.3B.302.YL EGG.3B.402.YL

FGG.3B.303.YL EGG.3B.403.YL

FGG.3B.304.YL EGG.3B.404.YL

FGG.3B.305.YL EGG.3B.405.YL

FGG.3B.306.YL EGG.3B.406.YL

FGG.3B.307.YL EGG.3B.407.YL

FGG.3B.308.YL EGG.3B.408.YL

FGG.3B.309.ML EGG.3B.409.ML

FGG.3B.310.YL EGG.3B.410.YL

FGG.3B.312.YL EGG.3B.412.YL

FGG.3B.314.YL EGG.3B.414.YL

FGG.3B.316.YL EGG.3B.416.YL

FGG.3B.318.YL EGG.3B.418.YL

FGG.3B.320.YL EGG.3B.420.YL

FGG.3B.322.YL EGG.3B.422.YL

FGG.3B.324.YL EGG.3B.424.YL

FGG.3B.326.YL EGG.3B.426.YL

FGG.3B.330.YL EGG.3B.430.YL

302

303

304

305

306

307

308

309

310

312

314

316

318

320

322

324

326

330

2T

FGG.2B.310.YL EGG.2B.410.YL

FGG.2B.312.YL EGG.2B.412.YL

FGG.2B.314.YL EGG.2B.414.YL

FGG.2B.316.YL EGG.2B.416.YL

FGG.2B.318.YL EGG.2B.418.YL

FGG.2B.319.YL EGG.2B.419.YL

310

312

314

316

318

319

12 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

FGG-EGG Crimp contacts

Contact part number

Male Female

Types

TT

FGG.00.554.ZZC EGG.00.654.ZZM

302

303

304

ø A

ø C

ø A ø C

Fig. 1 Fig. 2

ø (mm)

A C

0.5 0.45

0T

FGG.0B.560.ZZC EGG.0B.660.ZZM

FGG.0B.555.ZZC EGG.0B.655.ZZM

FGG.0B.554.ZZC –

302/303

304/305

306/307/309

0.9 1.10

0.7 0.80

0.5 0.45

1T

FGG.1B.565.ZZC EGG.1B.665.ZZM

FGG.1B.560.ZZC EGG.1B.660.ZZM

FGG.1B.555.ZZC EGG.1B.655.ZZM

FGG.1B.554.ZZC –

302/303

304/305

306/307/308

310/314/316

1.3 1.40

0.9 1.10

0.7 0.80

0.5 0.45

2T

FGG.2B.575.ZZC EGG.2B.675.ZZM

FGG.2B.570.ZZC EGG.2B.670.ZZM

FGG.2B.565.ZZC EGG.2B.665.ZZM

FGG.2B.560.ZZC EGG.2B.660.ZZM

FGG.2B.555.ZZC EGG.2B.655.ZZM

302

303

304/305

306/307

308/310

312/314/316

318/319

2.0 2.40

1.6 1.90

1.3 1.40

0.9 1.10

0.7 0.80

3T

FGG.3B.580.ZZC EGG.3B.680.ZZM

FGG.3B.575.ZZC EGG.3B.675.ZZM

FGG.3B.570.ZZC EGG.3B.670.ZZM

FGG.3B.565.ZZC EGG.3B.665.ZZM

FGG.3B.560.ZZC EGG.3B.660.ZZM

FGG.3B.555.ZZC EGG.3B.655.ZZM

302

303/304/309

305/306/307

308/309/310

312/314

316/318

320/322/324

326/330

3.0 3.20

2.0 2.40

1.6 1.90

1.3 1.40

0.9 1.10

0.7 0.80

Contact part number

Male Female

Types

ø (mm)

A C

0T

FGG.0B.561.ZZC EGG.0B.661.ZZM

FGG.0B.562.ZZC EGG.0B.662.ZZM

FGG.0B.556.ZZC EGG.0B.656.ZZM

302/303

304/305

0.9 0.80

0.9 0.45

0.7 0.45

1T

FGG.1B.566.ZZC EGG.1B.666.ZZM

FGG.1B.561.ZZC EGG.1B.661.ZZM

FGG.1B.556.ZZC EGG.1B.656.ZZM

302/303

304/305

306/307/308

1.3 1.10

0.9 0.80

0.7 0.45

2T

FGG.2B.576.ZZC EGG.2B.676.ZZM

FGG.2B.571.ZZC EGG.2B.671.ZZM

FGG.2B.566.ZZC EGG.2B.666.ZZM

FGG.2B.567.ZZC EGG.2B.667.ZZM

FGG.2B.561.ZZC EGG.2B.661.ZZM

FGG.2B.562.ZZC EGG.2B.662.ZZM

FGG.2B.556.ZZC EGG.2B.656.ZZM

302

303

304/305

306/307

304/305

306/307

308/310

312/314/316

318/319

2.0 1.90

1.6 1.40

1.3 1.10

1.3 0.80

0.9 0.80

0.9 0.45

0.7 0.45

3T

FGG.3B.576.ZZC EGG.3B.676.ZZM

FGG.3B.571.ZZC EGG.3B.671.ZZM

FGG.3B.566.ZZC EGG.3B.666.ZZM

FGG.3B.561.ZZC EGG.3B.661.ZZM

FGG.3B.562.ZZC EGG.3B.662.ZZM

FGG.3B.556.ZZC EGG.3B.656.ZZM

303/304/309

305/306/307

308/309/310

312/314

316/318

320/322/324

326/330

2.0 1.90

1.6 1.40

1.3 1.10

0.9 0.80

0.9 0.45

0.7 0.45

13www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

ø C L

ø A

Note: to order this accessory separately, use the above part numbers.

e

L

A

øB

Note: to order this part separately, use the above part numbers. The last

letters «LN» of the part number refer to the nut material and treatment. If

a nut in aluminium alloy or stainless steel is desired, replace the last letters

of the part number by «PT» or «AZ» respectively.

See page 17 for the tooling.

● Material: Nickel-plated bronze (3 μm)

GBA Locking washers

TT

0T

1T

2T

3T

Series

GBA.00.250.FN

GBA.0S.250.FN

GBA.1S.250.FN

GBA.2S.250.FN

GBA.3S.250.FN

Part number

9.5 7.1 1.0

12.5 9.1 1.0

16.0 12.1 1.0

19.5 15.1 1.2

25.0 18.1 1.4

Dimensions (mm)

A C L

● Material: Nickel-plated brass (3 μm), Natural anodized aluminium alloy, Stainless steel

GEA Hexagonal nuts

TT

0T

1T

2T

3T

Series

GEA.00.240.LN

GEA.0S.240.LN

GEA.1S.240.LN

GEA.2S.240.LN

GEA.3S.240.LN

Part number

9 10.2 M7 x 0.5 2.0

11 12.4 M9 x 0.6 2.0

14 15.8 M12 x 1.0 2.5

17 19.2 M15 x 1.0 2.7

22 25.0 M18 x 1.0 3.0

Dimensions (mm)

A B e L

e

ø A

ø B

L

ø B

L

e

ø A

Model 2

Model 1

Note: TT, 0T, 1T and 2T series fixed and free sockets for back panel

mounting are always delivered with this notched nut.

To order this accessory separately, use the above part numbers.

See page 18 for the tooling.

● Material: Chrome-plated brass (Ni 3 μm + Cr 0.3 μm)

GEG Notched nuts

TT

0T

1T

2T

Series

1

2

Model

GEG.00.240.LC

GEG.0S.240.LC

GEG.1S.240.LC

GEG.2S.240.LC

Part number

8.6 10 M7 x 0.5 2.5

10.5 12 M9 x 0.6 2.5

14.0 16 M12 x 1.0 3.5

17.5 20 M15 x 1.0 3.5

Dimensions (mm)

A B e L

14 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

eL

ø B

A

Note: 3T series fixed and free sockets for back panel mounting are always

delivered with a conical nut.

To order this accessory separately, use the above part numbers.

See page 17 for the tooling.

● Material: Chrome-plated brass (Ni 3 μm + Cr 0.3 μm)

GEC Conical nuts

TT

0T

1T

2T

3T

Series

GEC.00.240.LC

GEC.0S.240.LC

GEC.1S.240.LC

GEC.2S.240.LC

GEC.3S.240.LC

Part number

8 10 M7 x 0.5 2.5

10 12 M9 x 0.6 2.5

13 16 M12 x 1.0 3.2

17 20 M15 x 1.0 3.8

20 24 M18 x 1.0 4.5

Dimensions (mm)

A B e L

Accessories

N

ø A

L

B

sliding loop

BFG Blanking caps for plugs

7.0 4.0 9.0 60

9.5 5.0 11.0 85

12.0 6.0 12.4 85

15.0 6.0 13.8 85

18.8 6.0 17.6 120

Dimensions (mm)

A B L N

N

ø 3.5

ø A

L

B

BHG Blanking caps for fixed plugs

7.0 4.0 9.0 60

9.5 5.0 11.0 85

12.0 6.0 12.4 85

15.0 6.0 13.8 85

18.8 6.0 17.6 120

Dimensions (mm)

A B L N

● Body material: Chrome-plated brass (Ni 3 μm)

● Lanyard material: Stainless steel

● Crimp ferrule material: Nickel-plated brass + polyolefin

● O-ring material: Silicone

● Maximum operating temperature: 135°C

● Watertightness: IP68 according to IEC 60529

BFG.TT.100.CAS

BFG.0T.100.CAS

BFG.1T.100.CAS

BFG.2T.100.CAS

BFG.3T.100.CAS

Part number

BHG.TT.100.CAS

BHG.0T.100.CAS

BHG.1T.100.CAS

BHG.2T.100.CAS

BHG.3T.100.CAS

Part number

● Body material: Chrome-plated brass (Ni 3 μm)

● Lanyard material: Stainless steel

● Crimp ferrule material: Nickel-plated brass + polyolefin

● O-ring material: Silicone

● Maximum operating temperature: 135°C

● Watertightness: IP68 according to IEC 60529

15www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

ø A

L

N

ø B

● Material: CuSnZn plated brass (2 μm)

GCA Earthing washers

TT

0T

1T

2T

3T

Series

GCA.00.255.LT

GCA.0S.255.LT

GCA.1S.255.LT

GCA.2S.255.LT

GCA.3S.255.LT

Part number

9.5 7.1 0.4 18.2

13.0 9.1 0.4 22.0

17.0 12.2 0.5 27.5

20.0 15.2 0.5 32.0

25.0 18.2 0.5 39.0

Dimensions (mm)

A B L N

N

ø 3.5

ø A

L

M

B

BRE Blanking caps for sockets

7.0 6.5 10.5 2.5 60

9.5 7.7 12.7 2.7 85

12.0 9.5 14.4 3.5 85

15.0 10.4 16.3 4.4 85

18.8 11.4 20.2 5.4 120

Dimensions (mm)

A B L M N

N

ø A

L

M

B

sliding loop

BRF Blanking caps for free sockets

7.0 6.5 10.5 2.5 60

9.5 7.7 12.7 2.7 85

12.0 9.5 14.4 3.5 85

15.0 10.4 16.3 4.4 85

18.8 11.4 20.2 5.4 120

Dimensions (mm)

A B L M N

● Body material: Chrome-plated brass (Ni 3 μm)

● Lanyard material: Stainless steel

● Crimp ferrule material: Nickel-plated brass + polyolefin

● Maximum operating temperature: 135°C

● Watertightness: IP68 according to IEC 60529

BRF.TT.200.CAZ

BRF.0T.200.CAZ

BRF.1T.200.CAZ

BRF.2T.200.CAZ

BRF.3T.200.CAZ

Part number

BRE.TT.200.CAZ

BRE.0T.200.CAZ

BRE.1T.200.CAZ

BRE.2T.200.CAZ

BRE.3T.200.CAZ

Part number

● Body material: Chrome-plated brass (Ni 3 μm)

● Lanyard material: Stainless steel

● Crimp ferrule material: Nickel-plated brass + polyolefin

● Maximum operating temperature: 135°C

● Watertightness: IP68 according to IEC 60529

16 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

L

ø A

Bend relief (TPU)

1.2 22 1.1 1.4

1.8 22 1.8 2.1

2.5 22 2.5 2.8

2.8 22 2.8 3.1

3.2 22 3.2 3.5

2.5 22 2.5 2.8

2.8 22 2.8 3.1

GMA.00.012.DG

GMA.00.018.DG

GMA.00.025.DG

GMA.00.028.DG

GMA.00.032.DG

GMD.00.025.DG

GMD.00.028.DG

Bend relief Cable ø

A L min. max.

4.0 36 4.0 4.5

4.5 36 4.5 5.0

5.0 36 5.0 5.5

6.0 36 6.0 6.5

7.0 36 7.0 7.7

7.8 36 7.8 8.8

GMA.2B.040.DG

GMA.2B.045.DG

GMA.2B.050.DG

GMA.2B.060.DG

GMA.2B.070.DG

GMA.2B.080.DG

4.5 42 4.5 5.2

6.0 42 6.0 6.9

7.0 42 7.0 7.9

8.0 42 8.0 8.9

9.0 42 9.0 10.0

GMA.3B.050.DG

GMA.3B.060.DG

GMA.3B.070.DG

GMA.3B.080.DG

GMA.3B.090.DG

Part number

Bend relief Cable ø

A L min. max.

Part number

Note: all dimensions are in millimetres.

blue

white

grey

A

B

G

Colour

Ref.

yellow

brown

black

J

M

N

Colour

Ref.

red

orange

green

R

S

V

Colour

Ref.

Note: the last letter «G» of the part number indicates the grey colour of

the bend relief. For ordering a bend relief with another colour, see table

above and replace the letter «G» by the letter of the required colour.

2.5 24 2.5 2.9

3.0 24 3.0 3.4

3.5 24 3.5 3.9

4.0 24 4.0 4.4

4.5 24 4.5 5.2

GMA.0B.025.DG

GMA.0B.030.DG

GMA.0B.035.DG

GMA.0B.040.DG

GMA.0B.045.DG

2.5 30 2.5 2.9

3.0 30 3.0 3.4

3.5 30 3.5 3.9

4.0 30 4.0 4.4

4.5 30 4.5 4.9

5.4 30 5.4 6.0

6.5 30 6.5 7.0

GMA.1B.025.DG

GMA.1B.030.DG

GMA.1B.035.DG

GMA.1B.040.DG

GMA.1B.045.DG

GMA.1B.054.DG

GMA.1B.065.DG

TT

0T

1T

2T

3T

A bend relief made from thermoplastic polyurethane elas-

tomer can be fitted over LEMO plugs and sockets that are

supplied with nut for fitting such bend relief.

They are available in nine different colours that match with

the GRA insulating washers.

Use the part numbers shown below to order this accessory

separately.

17www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

Tooling

DCG Spanners for hexagonal nuts

N

L

ø B

● Material: blackened steel

TT

0T

1T

2T

3T

Series

DCG.91.149.0TN

DCG.91.161.1TN

DCG.91.201.4TN

DCG.91.231.7TN

DCG.91.282.2TN

Part number

14 40 50

16 45 52

20 52 65

23 62 68

28 76 73

Dimensions (mm)

B L N

10.1 12.8 124 48.3

12.1 14.8 124 49.3

16.1 21.0 124 51.9

20.1 22.8 129 53.5

Dimensions (mm)

A B L N

GEA.00.240.LN

GEA.0S.240.LN

GEA.1S.240.LN

GEA.2S.240.LN

GEA.3S.240.LN

Part number

of the nut

N

L max

ø B

DCA Spanners for hexagonal nuts with locator for flats on socket thread

● Material: blackened steel

TT

0T

1T

2T

3T

Series

DCA.91.149.0TN

DCA.91.161.1TN

DCA.91.201.4TN

DCA.91.231.7TN

DCA.91.282.2TN

Part number

14 65 50

16 73 52

20 85 65

23 100 68

28 120 73

Dimensions (mm)

B L N

GEA.00.240.LN

GEA.0S.240.LN

GEA.1S.240.LN

GEA.2S.240.LN

GEA.3S.240.LN

Part number

of the nut

L

N

ø A

ø B

DCH Spanners for conical nuts

● Material: dark grey polyurethane

TT

0T

1T

2T

Series

DCH.91.101.PN

DCH.91.121.PN

DCH.91.161.PN

DCH.91.201.PN

Part number

GEC.00.240.LC

GEC.0S.240.LC

GEC.1S.240.LC

GEC.2S.240.LC

Part number

of the nut

18 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

N

M

L

S1

S2

0T

1T

DCP Set of flat spanners for collet nuts

95 2.5 21 7.55 7.05

95 2.5 25 11.05 9.05

115 3.0 30 14.05 12.05

115 3.0 35 16.05 14.05

Dimensions (mm)

L M N S1 S2

10.1 12.8 124 48.3

12.1 14.8 124 49.3

16.1 21.0 124 51.9

20.1 22.8 129 53.5

Dimensions (mm)

A B L N

L

N

ø A

ø B

DCH Spanners for notched nuts

● Material: blue polyurethane

TT

0T

1T

2T

Series

DCH.91.101.PA

DCH.91.121.PA

DCH.91.161.PA

DCH.91.201.PA

Part number

GEG.00.240.LC

GEG.0S.240.LC

GEG.1S.240.LC

GEG.2S.240.LC

Part number

of the nut

M

L

N

S1

● Material: chrome-plated steel

DCP Flat spanners for TT collet nut

DCP.99.050.TC

DCP.99.055.TC

DCP.99.060.TC

Part number

78 2 12.6 5.0

78 2 12.6 5.5

78 2 12.6 6.0

Dimensions (mm)

L M N S1

0T

1T

2T

3T

Series

DCP.0T.110.TN

DCP.2T.110.TN

Part number

● Material: blackened steel

19www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

Pneumatic crimping tools

1) According to specification MIL-C-22520/7-01.

2) According to specification MIL-C-22520/1-01.

Manual crimping tools

Fig. A

Fig. B

Crimping tools for electrical contacts

LEMO

DANIELS

ASTRO

Supplier

DPC.91.701.V1) DPC.91.101.A2) DPC.91.102.V

MH8601) AF82) M300BT

6163361) 6157082) –

Part number

contact ø 0.5-0.7 contact ø 1.6-2.0 contact ø 3.0-4.0

0.9-1.3 (Fig. A) (Fig. B) (Fig. B)

According to specification MIL-C-22520/7-01.

For LEMO contacts ø 0.5-0.7-0.9-1.3 mm

LEMO

BALMAR

BUCHANAN

SupplierPart number

DPC.91.701.C

85230

621101

Contact Test

ø A force (N)

F

DCK Retention testing tools for crimp contacts 0.5-0.7-0.9 and 1.3 mm diameter

0.5 8

0.7 10

0.9 14

1.3 25

DCK.91.050.8LRC DCK.91.050.8LRM

DCK.91.071.0LRC DCK.91.071.0LRM

DCK.91.091.4LRC DCK.91.091.4LRM

DCK.91.132.5LRC DCK.91.132.5LRM

Testing tool part number

For male For female

contact contact

ø (mm)

A C

Fig.

Conductor

AWG

20 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

These positioners are suitable for use with both

manual and pneumatic crimping tools according to

the MIL-C-22520/7-01 standard.

male female

ø A

ø C

Fig. 1

ø A ø C

Fig. 2

Note: a wide variation of strand number and diameter

combinations are quoted as being AWG, some of

which do not have a large enough cross section to

guarantee a crimp as per either MIL-C-22520/1-01

or /7-01.

Our technical department is at your disposal to study

and propose a solution to all your applications.

DCE Positioners for crimp contacts ø 0.5-0.7-0.9 and 1.3 mm

Positioners part number

For male For female

contact contact

Types

TT

DCE.91.050.0VC DCE.91.050.0VM

302

303

304

0.5 0.45 1 28-30-32

0T

DCE.91.090.BVC DCE.91.090.BVM

DCE.91.090.AVC DCE.91.090.AVM

DCE.91.070.BVC DCE.91.070.BVM

DCE.91.050.BVC DCE.91.050.BVM

302/303

304/305

306/307/309

0.9 1.10 1 20-22-24

0.9 0.80 2 22-24-26

0.9 0.45 2 28-30-32

0.7 0.80 1 22-24-26

0.7 0.45 2 28-30-32

0.5 0.45 1 28-30-32

1T

DCE.91.131.BVC DCE.91.131.BVM

DCE.91.091.BVC DCE.91.091.BVM

DCE.91.071.BVC DCE.91.071.BVM

DCE.91.051.BVC DCE.91.051.BVM

302/303

304/305

306/307/308

310/314/316

1.3 1.40 1 18-20

1.3 1.10 2 20-22-24

0.9 1.10 1 20-22-24

0.9 0.80 2 22-24-26

0.7 0.80 1 22-24-26

0.7 0.45 2 28-30-32

0.5 0.45 1 28-30-32

2T

DCE.91.132.BVC DCE.91.132.BVM

DCE.91.132.CVC DCE.91.132.CVM

DCE.91.092.BVC DCE.91.092.BVM

DCE.91.092.AVC DCE.91.092.AVM

DCE.91.072.BVC DCE.91.072.BVM

304/305/306/307

308/310

312/314/316/318/319

1.3 1.40 1 18-20

1.3 1.10 2 20-22-24

1.3 0.80 2 22-24-26

0.9 1.10 1 20-22-24

0.9 0.80 2 22-24-26

0.9 0.45 2 28-30-32

0.7 0.80 1 22-24-26

0.7 0.45 2 28-30-32

3T

DCE.91.133.BVC DCE.91.133.BVM

DCE.91.093.BVC DCE.91.093.BVM

DCE.91.073.BVC DCE.91.073.BVM

308/309/310

312/314/316/318

320/322/324/326/330

1.3 1.40 1 18-20

1.3 1.10 2 20-22-24

0.9 1.10 1 20-22-24

0.9 0.80 2 22-24-26

0.7 0.80 1 22-24-26

0.7 0.45 2 28-30-32

21www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

Note: these turrets can be used with manual crimping tool according to MIL-

C-22520/1-01 standard.

DCE Turret for crimp contacts 1.6-2.0-3.0 and 4.0 mm diameter

Positioners

part number

Types

2T DCE.91.202.BVCM

DCE.91.202.BVCM

DCE.91.162.BVCM

302

303

2.0 2.4 1 12-14-16

2.0 1.9 2 14-16-18

1.6 1.9 1 14-16-18

1.6 1.4 2 18-20-22

3T DCE.91.303.BVCM

DCE.91.203.BVCM

DCE.91.163.BVCM

302

303/304/309

305/306/307

3.0 3.2 1 10-12-14

2.0 2.4 1 12-14-16

2.0 1.9 2 14-16-18

1.6 1.9 1 14-16-18

1.6 1.4 2 18-20-22

Contact

ø A (mm)

DCF Automatic extraction tools for crimp contacts

Extractors part number

for male

and female contacts

Types

TT DCF.91.050.2LT

DCF.91.050.2LT

302

303

304

0.5

0T DCF.91.090.2LT

DCF.92.070.3LT

DCF.91.050.2LT

302/303

304/305

306/307/309

0.9

0.7

0.5

1T DCF.91.131.2LT

DCF.91.090.2LT

DCF.91.070.2LT

DCF.91.050.2LT

302/303

304/305

306/307/308

310/314/316

1.3

0.9

0.7

0.5

2T DCC.91.202.5LA1)

DCF.91.162.2LT

DCF.91.131.2LT

DCF.91.090.2LT

DCF.91.070.2LT

302

303

304/305/306/307

308/310

312/314/316/318/319

2.0

1.6

1.3

0.9

0.7

3T DCF.91.303.5LT

DCC.91.202.5LA1)

DCF.91.163.5LT

DCF.91.133.5LT

DCF.91.093.5LT

DCF.91.073.5LT

302

303/304/309

305/306/307

308/309/310

312/314/316/318

320/322/324/326/330

3.0

2.0

1.6

1.3

0.9

0.7

Note: 1) this model is thumb-operated.

ø (mm)

A C

Fig.

Conductor

AWG

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

22 www.lemo.com

Fixed socket with straight print contact

PCB drilling pattern

0.8 2.3 120°

0.8 3.0 120°

0.8 4.6 120°

0.8 5.6 120°

0T

1T

2T

3T

Dimensions

A B C

Series

0.8 2.2

0.8 2.8

0.8 4.4

0T

1T

2T

Dimensions

A B

Series

0.6 3.0 60°

0.8 3.7 60°

0T

1T

Dimensions

A B C

Series

0.8 5.6 72°

0.8 7.1 72°

2T

3T

Dimensions

A B C

Series

0.8 3.8 51°26’1T

Dimensions

A B C

Series

0.8 6.50 45° 22°30’ 2.80

0.8 8.20 45° 22°30’ 3.40

2T

3T

Dimensions

A B C D H

Series

ø A

ø B

302

ø A

ø B

C°

303

ø A

ø B

C°

305

ø A

ø B

C°

307

ø A

ø B

C°

304

ø A

ø B

C°

306

ø A

ø B

C°

308

ø A

ø B

C°

306

C°

ø A

ø B

309

ø A

ø B

C°

308

D°

ø A

ø H

ø B

C°

312

H

ø B

C°

D°

ø A

310

0.6 3.2 45°

0.8 7.5 45°

0T

3T

Dimensions

A B C

Series

0.8 6.4 45°

0.8 7.5 45°

2T

3T

Dimensions

A B C

Series

0.6 3.95 45° 22°30’ 1.40

0.8 6.30 45° 22°30’ 2.15

0.8 7.90 45° 22°30’ 2.80

1T

2T

3T

Dimensions

A B C D H

Series

0.6 2.8 72°

0.8 3.4 72°

0.8 5.2 72°

0.8 6.7 72°

0T

1T

2T

3T

Dimensions

A B C

Series

0.6 2.5 45°

0.8 3.1 45°

0.8 5.0 45°

0.8 6.2 45°

0T

1T

2T

3T

Dimensions

A B C

Series

0.6 3.00 60°

0.8 3.70 60°

0.8 5.80 60°

0.8 7.08 60°

0T

1T

2T

3T

Dimensions

A B C

Series

Note: all views are from the side of the socket.

23www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

0.6 4.4 90° 1.90 1.80

0.8 6.5 90° 2.65 2.65

0.8 8.2 90° 3.40 3.40

1T

2T

3T

Dimensions

A B C H I

Series

0.6 4.4 32°44’ 2.01T

Dimensions

A B D H

Series

36°

C°

H

ø B

ø A

I

314

D°

72°

ø A

ø B

ø H

316

0.8 6.7 60° 30° 15° 3.52T

Dimensions

A B C D E H

Series

ø B

ø H

ø 0.6

C°

D°

ø E

324

ø H

ø 8.8

ø 0.6

D°

E°

C°

322

90°

ø 0.6

2.6

ø 5.7

2.2

ø 9

11°15'

36°

2

°

3

0

'

3T.330

ø 5.6

ø 2.1

ø 9

ø 0.6

40°

25°43'

120°

3T.326

E°

C°

D°

ø A

ø B

ø H

318

D°

C°

ø A

E°

ø B

ø H

319

Note: all views are from the side of the socket.

E°

D°

72°

ø A

ø B

ø H

316

ø H

ø 0.6

ø B

D°

C°

320

ø 4.2

ø 1.6

ø 7

ø 0.6

40°

25°43'

120°

2T.326

36°

ø 2.2

ø 0.6

4.6

ø 7

72°

21°11'

2T.332

0.8 6.6 32°44’ 16°22’ 3.10

0.8 8.4 32°44’ 16°22’ 3.86

2T

3T

Dimensions

A B D E H

Series

0.8 6.7 60° 30° 15° 3.50

0.8 8.4 60° 30° 15° 4.34

2T

3T

Dimensions

A B C D E H

Series

8.62 51°26’ 27°42’ 4.783T

Dimensions

B C D H

Series

45° 25°43’ 22°30’ 53T

Dimensions

C D E H

Series

8.8 45° 25°43’ 1.8 5.303T

Dimensions

B C D E H

Series

24 www.lemo.com

®

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

302/303

304/305

306/307/309

312

0.9 9.0 5 4.0 9.0 5 4.0

0.7 8.0 5 3.5 9.0 5 4.0

0.5 7.0 5 2.5

0.35 7.0 5 2.5

302/303

304/305

306/307/308

310/314/316

1.3 10.5 7 3.5 14.5 7 4.0

0.9 10.5 7 3.0 14.5 7 4.0

0.7 10.5 7 3.0 14.5 7 4.0

0.5 13.0 7 2.5

302

303

304/305/306/307

308/310

312/314/316/318/319

326/332

2.0 16.5 8 4.0 19.5 8 5.5

1.6 16.5 8 3.5 19.5 8 5.5

1.3 15.5 8 3.5 17.5 8 4.0

0.9 14.5 8 3.0 17.5 8 4.0

0.7 14.5 8 3.0 17.5 8 4.0

0.5 14.5 8 2.5

Reference

S

T

L

ø contact

(mm)

Cable assembly

Cable stripping lengths (mm)

Solder Crimp

L S T L S T

302

303

304

0.5 8.0 4 2.5 11.0 4 3.0

302

303/304

305/306/307

308/310

309

312/314/316/318

320/322/324/326/330

3.0 19.0 10 4.5 23.0 10 5.5

2.0 18.0 10 4.0 22.0 10 5.5

1.6 18.0 10 3.5 22.0 10 5.5

1.3 17.0 10 3.5 20.0 10 4.0

17.0 10 20.0 10

0.9 16.0 10 3.0 20.0 10 4.0

0.7 16.0 10 3.0 20.0 10 4.0

1.3 3.5 4.0

2.0 4.0 5.5

TT

0T

1T

2T

3T

25www.lemo.com

®

Data subject to change

PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND

INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.

IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS

SITUATIONS.

1. SHOCK AND FIRE HAZARD

Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue

(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.

Mated components should never be disconnected while live as this may result in an exposed electric arc and local

overheating, resulting in possible damage to components.

2. HANDLING

Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect

components should be rejected or returned to the factory for verification.

Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be used

during installation and / or assembly in order to obtain safe and reliable performance.

3. USE

Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general

conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to

eliminate all risk of transmission of such voltages to any exposed metal part of the connector.

4. TEST AND OPERATING VOLTAGES

The maximum admissible operating voltage depends upon the national or international standards in force for the

application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the

catalog however these may be influenced by PC board design and / or wiring harnesses.

The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the

test duration is 1 minute.

5. CE MARKING

CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or

several European safety directives.

CE marking applies to complete products or equipment, but not to electromechanical components, such as

connectors.

6. PRODUCT IMPROVEMENTS

The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior

notification.

Product safety notice

No reproduction or use without express permission of editorial or pictorial content, in any manner.

LEMO reserve the right at all times to modify and improve specifications without any notification.

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

LEMO HEADQUARTERS

SWITZERLAND

LEMO SA

Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens

Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com

LEMO SUBSIDIARIES

LEMO DISTRIBUTORS

AUSTRALIA, CHILE, CZECH REPUBLIC, GREECE, INDIA, ISRAEL,

NEW ZEALAND, PAKISTAN, POLAND, RUSSIA, SOUTH AFRICA,

SOUTH KOREA, TAIWAN, TURKEY, UKRAINE

www.lemo.com

AUSTRIA

LEMO Elektronik GesmbH

Lemböckgasse 49/E6-3

1230 Wien

Tel: (+43 1) 914 23 20 0

Fax:(+43 1) 914 23 20 11

sales@lemo.at

BRAZIL

LEMO Latin America Ltda

Av. José Rocha Bonfim,

214 Salas 224 / 225

Condomínio Praça Capital

Ed. Chicago

Campinas / SP - Brasil 13080-650

Tel: +55 (11) 98689 4736

info-la@lemo.com

CANADA

LEMO Canada Inc

44 East Beaver Creek Road, unit 20

Richmond Hill, Ontario L4B 1G8

Tel: (+1 905) 889 56 78

Fax: (+1 905) 889 49 70

info-canada@lemo.com

CHINA / HONG KONG

LEMO Electronics (Shanghai) Co., Ltd

First Floor, Block E,

18 Jindian Road, Pudong

Shanghai, China, 201206

Tel: (+86 21) 5899 7721

Fax: (+86 21) 5899 7727

cn.sales@lemo.com

DENMARK

LEMO Denmark A/S

Gammel Mosevej 46

2820 Gentofte

Tel: (+45) 45 20 44 00

Fax: (+45) 45 20 44 01

info-dk@lemo.com

FRANCE

LEMO France Sàrl

24/28 Avenue Graham Bell

Bâtiment Balthus 4

Bussy Saint Georges

77607 Marne la Vallée Cedex 3

Tel: (+33 1) 60 94 60 94

Fax: (+33 1) 60 94 60 90

info-fr@lemo.com

GERMANY

LEMO Elektronik GmbH

Hanns-Schwindt-Str. 6

81829 München

Tel: (+49 89) 42 77 03

Fax: (+49 89) 420 21 92

info@lemo.de

HUNGARY

REDEL Elektronika Kft

Nagysándor József u. 6-12

1201 Budapest

Tel: (+36 1) 421 47 10

Fax: (+36 1) 421 47 57

info-hu@lemo.com

ITALY

LEMO Italia srl

Viale Lunigiana 25

20125 Milano

Tel: (+39 02) 66 71 10 46

Fax: (+39 02) 66 71 10 66

sales.it@lemo.com

JAPAN

LEMO Japan Ltd

2-7-22, Mita,

Minato-ku, Tokyo, 108-0073

Tel: (+81 3) 54 46 55 10

Fax: (+81 3) 54 46 55 11

lemoinfo@lemo.co.jp

NETHERLANDS / BELGIUM

LEMO Connectors Benelux

De Trompet 1060

1967 DA Heemskerk

Tel. (+31) 251 25 78 20

Fax (+31) 251 25 78 21

info@lemo.nl

NORWAY / ICELAND

LEMO Norway A/S

Stanseveien 6B

0975 Oslo

Tel: (+47) 22 91 70 40

Fax: (+47) 22 91 70 41

info-no@lemo.com

SINGAPORE

LEMO Asia Pte Ltd

4 Leng Kee Road,

#06-09 SiS Building

Singapore 159088

Tel: (+65) 6476 0672

Fax: (+65) 6474 0672

sg.sales@lemo.com

SPAIN / PORTUGAL

IBERLEMO SAU

Brasil, 45, 08402 Granollers

Barcelona

Tel: (+34 93) 860 44 20

Fax: (+34 93) 879 10 77

info-es@lemo.com

SWEDEN / FINLAND

LEMO Nordic AB

Mariehällsvägen 39A

168 65 Bromma

Tel: (+46 8) 635 60 60

Fax: (+46 8) 635 60 61

info-se@lemo.com

SWITZERLAND

LEMO Verkauf AG

Grundstrasse 22 B

6343 Rotkreuz

Tel: (+41 41) 790 49 40

Fax: (+41 41) 790 49 43

ch.sales@lemo.com

UNITED KINGDOM

LEMO UK Ltd

12-20 North Street

Worthing, West Sussex,

BN11 1DU

Tel: (+44 1903) 23 45 43

Fax: (+44 1903) 20 62 31

lemouk@lemo.com

USA

LEMO USA Inc

P.O. Box 2408

Rohnert Park, CA 94927-2408

Tel: (+1 707) 578 88 11

(+1 800) 444 53 66

Fax:(+1 707) 578 08 69

info-US@lemo.com

U.S. Air Force photo/Tech. Sgt. Shane A.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

LEMO:

FGG.0T.309.CLAC50Z FGG.0T.305.KLAC50Z HGG.0T.307.CLLP HGG.0T.309.CLLP PHG.0T.305.CLLC50Z

PHG.0T.307.CLLC50Z EGG.0T.303.CLL FGG.0T.307.KLAC50Z FGG.0T.303.CLAC50 HGG.0T.303.CLLP

EGG.0T.307.KLL EGG.0T.309.CLL EGG.0T.305.KLL FGG.0T.309.KLAC50Z BRE.0T.200.CAZ FGG.0T.302.CLAC50

PHG.0T.305.CYMC25Z PHG.0T.303.CYMC20Z PHG.0T.302.CLLC50